Coating category definition

Coating category means a type of surface coating for which there is a separate emission limit specified in these rules.
Coating category means the class of coating as specified in paragraph (c) of this Section.
Coating category means the applicable category which best describes the coating as listed in this rule.

Examples of Coating category in a sentence

  • Coating category, consistent with the coating categories in section 4(a) of this rule.

  • The Metallic Pigmented Coating category does not include coatings applied to roofs or Zinc-Rich Primers.

  • The Rust Preventative Coating category does not include coatings that are required to be applied as a topcoat over a primer, or coatings that are intended for use on wood or other non-metallic surfaces.

  • Effective January 1, 2013 the Antenna Coating category is eliminated and will be subjected to the applicable VOC limits of Table 1.

  • Metallic Pigmented coatings must contain at least 48 grams of elemental metallic pigment (excluding zinc) per liter of coating as applied (at least 0.4 pounds per gallon), when tested in accordance with SCAQMD Method 318-95, incorporated by reference in subsection 8.5.4. The Metallic Pigmented Coating category does not include coatings applied to roofs or Zinc-Rich Primers.

  • Coating category, consistent with the coating categories in section 4(b) of this rule.

  • The Wood Coating category includes the following clear and semitransparent coatings: lacquers, varnishes, sanding sealers, penetrating oils, clear stains and wood conditioners used as undercoats, and wood sealers used as topcoats.

  • Effective January 1, 2013 the Clear Wood Coating category is eliminated and will be subjected to the applicable VOC limits of Table 1.

  • The Plastic Parts and Products (Surface Coating) category of major sources was listed on July 16, 1992 (57 FR 31576) under the Surface Coating Processes industry group.

  • The Wood Coating category does not include the following: clear sealers that are labeled and formulated for use on concrete/masonry surfaces; or coatings intended for substrates other than wood.

Related to Coating category

  • Rating Category means one of the generic rating categories of any Rating Agency without regard to any refinement or gradation of such rating by a numerical modifier or otherwise.

  • Clinical categories means the groups into which hospital treatments are categorised by type, e.g., brain and nervous system, kidney and bladder, and digestive system. At the time of writing there were 38 categories in the Medicare clinical categories system.

  • Transaction Category means the particular type of repurchase transaction effected hereunder, as determined with reference to the term of the transaction and the categories of Securities that constitute Eligible Securities therefor, which term shall include FICASH I Transactions, FICASH II Transactions, FICASH III Transactions, FITERM I Transactions, FITERM II Transactions, FITERM III Transactions, and such other transaction categories as may from time to time be designated by the Funds by notice to Seller, Custodian and Repo Custodian.

  • Highest Rating Category means, with respect to an Eligible Investment, that the Eligible Investment is rated by S&P or Moody’s in the highest rating given by that rating agency for that general category of security. By way of example, the Highest Rating Category for tax-exempt municipal debt established by S&P is “A-1+” for debt with a term of one year or less and “AAA” for a term greater than one year, with corresponding ratings by Moody’s of “MIG-1” (for fixed rate) or “VMIG-1” (for variable rate) for three months or less and “Aaa” for greater than three months. If at any time (a) the Bonds are not rated, (b) both S&P and Moody’s rate an Eligible Investment and (c) one of those ratings is below the Highest Rating Category, then such Eligible Investment will, nevertheless, be deemed to be rated in the Highest Rating Category if the lower rating is no more than one rating category below the highest rating category of that rating agency. For example, an Investment rated “AAA” by S&P and “Aa3” by Xxxxx’x is rated in the Highest Rating Category. If, however, the lower rating is more than one full rating category below the Highest Rating Category of that rating agency, then the Eligible Investment will be deemed to be rated below the Highest Rating Category. For example, an Eligible Investment rated “AAA” by S&P and “A1” by Xxxxx’x is not rated in the Highest Rating Category.

  • Product Category means the applicable category which best describes the product as listed in this Section 94508.

  • Issue Type Category means, with respect to a Municipal Obligation acquired by the Fund, for purposes of calculating S&P Eligible Assets as of any Valuation Date, one of the following categories into which such Municipal Obligation falls based upon a good faith determination by the Fund: health care issues (including issues related to teaching and non-teaching hospitals, public or private); housing issues (including issues related to single- and multi-family housing projects); educational facilities issues (including issues related to public and private schools); student loan issues; transportation issues (including issues related to mass transit, airports and highways); industrial development bond issues (including issues related to pollution control facilities); public power utilities issues (including issues related to the provision of electricity, either singly or in combination with the provision of other utilities, and issues related only to the provision of gas); water and sewer utilities issues (including issues related to the provision of water and sewers as well as combination utilities not falling within the public power utilities category); special utilities issues (including issues related to resource recovery, solid waste and irrigation as well as other utility issues not falling within the public power and water and sewer utilities categories); general obligation issues; lease obligations (including certificates of participation); Escrowed Bonds; and other issues (“Other Issues”) not falling within one of the aforementioned categories. The general obligation issue category includes any issuer that is directly or indirectly guaranteed by the State or its political subdivisions. Utility issuers are included in the general obligation issue category if the issuer is directly or indirectly guaranteed by the State or its political subdivisions. Municipal obligations in the utility issuer category will be classified within one of the three following sub-categories: (i) electric, gas and combination issues (if the combination issue includes an electric issue); (ii) water and sewer utilities and combination issues (if the combination issues does not include an electric issue); and (iii) irrigation, resource recovery, solid waste and other utilities, provided that Municipal Obligations included in this sub-category (iii) must be rated by S&P in order to be included in S&P Eligible Assets. Municipal Obligations in the transportation issue category will be classified within one of the two following sub-categories: (i) streets and highways, toll roads, bridges and tunnels, airports and multi-purpose port authorities (multiple revenue streams generated by toll roads, airports, real estate, bridges); (ii) mass transit, parking seaports and others.

  • Price Category means the price category and associated eligibility criteria referred to in Schedule 7 that determine the Price(s) that apply to an ICP;

  • eligible Categories means Categories (1), (2) and (3) set forth in the table in paragraph 1 of Schedule 1 to this Agreement;

  • Category 3 means those affected lands and support facilities if those lands supported operations which were not completed or substantially completed prior to July 1, 1973 (the effective date of the Wyoming Environmental Quality Act) and any affected lands or support facilities taken out of use on or after July 1, 1973 and before May 25, 1975 (the effective date of the Division’s 1975 Rules and Regulations).

  • eligible Category means Category (1) set forth in the table in paragraph 1 of Schedule 1 to this Agreement;

  • Special Category Data means any personal data revealing racial or ethnic origin, political opinions, religious or philosophical beliefs, or trade union membership, and the processing of genetic data, biometric data for the purpose of uniquely identifying a natural person, data concerning health or data concerning a natural person's sex life or sexual orientation.

  • Ordering Catalog means the electronic listing of items and their corresponding Contract unit prices available for ordering under this contract.

  • Category A means the relevant information which shall be included in the base prospectus. This information cannot be left in blank for later insertion in the final terms;

  • Finished grade means the grade upon completion of the fill or excavation.

  • Obligation Category means Payment, Borrowed Money, Bond, Loan, or Bond or Loan, only one of which shall be specified in the Standard, and:

  • Category 2 Training: This category includes services related to training state employees to understand and apply Agile concepts and tools.

  • Shopping cart means those push carts of the type or types which are commonly provided by grocery stores, drug stores or other retail mercantile establishments for the use of the public in transporting commodities in stores and markets and, incidentally, from the stores to a place outside the store.

  • Inclusionary development means a development containing both affordable units and market rate units. This term includes, but is not necessarily limited to: new construction, the conversion of a non-residential structure to residential and the creation of new affordable units through the reconstruction of a vacant residential structure.

  • Specific Nomination Factors means the nomination factors set out in clause 4.3.

  • SAP Training Catalogue means the catalogue published by SAP containing details of SAP training courses and services.

  • Building level or district level leader means an individual employed by the District whose job assignment is that of a building level or district level administrator or an equivalent role, including an administrator licensed by the State Board of Education, an unlicensed administrator, or an individual on an Administrator Licensure Completion Plan. Building level or district level leader does not include the superintendent, deputy superintendents, associate superintendents, and assistant superintendents.

  • Category B means that the base prospectus shall include all the general principles related to the information required, and only the details which are unknown at the time of the approval of the base prospectus can be left in blank for later insertion in the final terms;

  • Peak tube potential means the maximum value of the potential difference across the x-ray tube during an exposure.

  • Categories in this Schedule is to a Category or Categories of the Table).

  • Special Categories of Data means personal data revealing racial or ethnic origin, political opinions, religious or philosophical beliefs, or trade union membership, and the processing of genetic data, biometric data for the purpose of uniquely identifying a natural person, data concerning health or data concerning a natural person's sex life or sexual orientation;

  • Category means a category set forth in the table in Section IV of Schedule 2 to this Agreement.