Ceiling Grid System definition

Ceiling Grid System. Mechanically suspended, 2' x 4' Armsxxxxx "Prelude" building-standard grid throughout the Premises.
Ceiling Grid System. Xxxxxxxxx 15/16” white. The ceiling height will be at nominally 11’6” in the open areas and 9’ in all enclosed spaces.

Examples of Ceiling Grid System in a sentence

  • Systems shall include T-bar Ceiling Grid System, Ceiling Grid Support System, blank pans, seats, gasket tape and light fixtures as specified in Division 15.

  • A 1.4.2.1 Inequitable provision across EnglandTable A 1.2 shows an inequity in IP CAMHS provision across England.

  • Performance B2.3.1 (b), 15 years, B2.3.1 (c), 5 years, and B2.3.2. The ECOPLUS Two-way Exposed Suspended Ceiling Grid System meets this requirement.

  • ECOPLUS Two-way Exposed Suspended Ceiling Grid System provides adequate resistance to soft body impacts, based upon experience of use in commercial applications.

  • The Technical Literature for the ECOPLUS Two- way Exposed Suspended Ceiling Grid System has been examined by BEAL and found to be satisfactory.

  • The ECOPLUS Two-Way Exposed Suspended Ceiling Grid System when used in accordance with this Appraisal certificate and subjected to normal conditions of environment and use will meet the performance requirements of NZBC B2.3.1 (b), 15 years.

  • Some major initiatives which demonstrate focus towards the attainment of these goals are outlined below.CHAPTER 4: THE NATIONAL SOCIAL SITUATION4.3.1. Goal 1: Our governance approach will be based onprinciples of participation and inclusionThe GoRTT recognises that citizens must participate in national decision making and public policy must be responsive to the needs of the population.

  • The ECOPLUS Two-way Exposed Suspended Ceiling Grid System must be designed to comply with seismic compliance AS/NZS 1170.5.

  • The manufacture of the ECOPLUS Two-way Exposed Suspended Ceiling Grid System components has been assessed by BEAL and found to be satisfactory.

  • Instead of: You have the right to opt out of this service and tell us not to pay any overdrafts.

Related to Ceiling Grid System

  • Grid System means STU / MSEDCL power transmission system / distribution system through which Delivered Energy is evacuated and distributed.

  • PJM Region Installed Reserve Margin means the percent installed reserve margin for the PJM Region required pursuant to RAA, Schedule 4.1, as approved by the PJM Board. PJM Region Peak Load Forecast:

  • Digital Signal Level 3 (DS-3 means the 44.736 Mbps third level signal in the time division multiplex hierarchy.

  • Digital Signal Level 0 (DS-0 means the lowest-level signal in the time division multiplex digital hierarchy, and represents a voice-grade channel operating at either the 56 Kbps or 64 Kbps transmission bit rates. There are twenty-four (24) DS-0 channels in a DS-1.

  • Digital Signal Level 1 (DS-1 means the 1.544 Mbps first level signal in the time division multiplex hierarchy.

  • System Availability means, with respect to any particular calendar month, the ratio obtained by subtracting Unscheduled Downtime during such month from the Total Monthly Time, and thereafter dividing the difference so obtained by the Total Monthly Time. Represented algebraically, System Availability for any particular calendar month is determined as follows:

  • Building level or district level leader means an individual employed by the District whose job assignment is that of a building level or district level administrator or an equivalent role, including an administrator licensed by the State Board of Education, an unlicensed administrator, or an individual on an Administrator Licensure Completion Plan. Building level or district level leader does not include the superintendent, deputy superintendents, associate superintendents, and assistant superintendents.

  • Digital Signal Level 0 or "DS0" means the 64 Kbps zero-level signal in the time-division multiplex hierarchy.

  • Sound level meter means an instrument which includes a microphone, amplifier, RMS detector, integrator or time averager, output meter, and weighting networks used to measure sound pressure levels.

  • Applicable Measurement Period means the most recently completed four consecutive fiscal quarters of the Issuer immediately preceding the Applicable Calculation Date for which internal financial statements are available.

  • Licensed Level means a) when referenced in the context of a Named User, the quantity of Metric for which each individual Named User category and type is licensed -and- b) when referenced in the context of a Package, the quantity of Metric for which each individual Package is licensed; and

  • Digital Signal Level 1 or "DS1" means the 1.544 Mbps first-level signal in the time-division multiplex hierarchy. In the time-division multiplexing hierarchy of the telephone network, DS1 is the initial level of multiplexing. There are twenty-eight (28) DS1s in a DS3.

  • Base Level means the level of the Index (excluding any flash estimates) published or announced by Eurostat (or any successor entity which publishes such index) in respect of the month which is 12 calendar months prior to the month for which the Substitute Index Level is being determined;

  • Digital Signal Level means one of several transmission rates in the time-division multiplex hierarchy.

  • Final Level means, in respect of the Index, the Closing Level on the Final Valuation Date, provided that, if the Final Valuation Date is not an Exchange Business Day, then the Final Level will be determined on the immediately preceding

  • State Level Monitoring Cell means the body constituted by the State Government for the control and elimination of ragging in institutions within the jurisdiction of the State, established under a State Law or on the advice of the Central Government, as the case may be.

  • Digital Signal Level 3 or "DS3" means the 44.736 Mbps third-level signal in the time-division multiplex hierarchy. In the time-division multiplexing hierarchy of the telephone network, DS3 is defined as the third level of multiplexing.

  • Borrowing Base Utilization Percentage means, as of any day, the fraction expressed as a percentage, the numerator of which is the sum of the Revolving Credit Exposures of the Lenders on such day, and the denominator of which is the Borrowing Base in effect on such day.

  • Supplier Profit Margin means, in relation to a period or a Milestone (as the context requires), the Supplier Profit for the relevant period or in relation to the relevant Milestone divided by the total Call Off Contract Charges over the same period or in relation to the relevant Milestone and expressed as a percentage;

  • Maximum design heat input means the ability of a unit to combust a stated maximum amount of fuel per hour on a steady state basis, as determined by the physical design and physical characteristics of the unit.

  • Applicable Margins means collectively the Applicable Revolver Index Margin, the Applicable Term Loan Index Margin, the Applicable Revolver LIBOR Margin and the Applicable Term Loan LIBOR Margin.

  • Intermodal Rail Yard means a rail facility in which cargo is transferred from drayage truck to train or vice-versa.

  • Floor Area Ratio (FAR) means the quotient obtained by dividing the total covered area (plinth area) on all floors by the area of plot.

  • Applicable L/C Margin means the per annum fee, from time to time in effect, payable with respect to outstanding Letter of Credit Obligations as determined by reference to Section 1.5(a).

  • Three-dimensional reference system means a system as described in Appendix 2 to this annex;

  • Minimum Level (ML means the concentration at which the entire analytical system must give a recognizable signal and an acceptable calibration point. The ML is the concentration in a sample that is equivalent to the concentration of the lowest calibration standard analyzed by a specific analytical procedure, assuming that all the method-specified sample weights, volumes and processing steps have been followed.