Categorised waters definition

Categorised waters. (as defined in MSN 1837(M)) fall into 4 types listed below:
Categorised waters means waters categorised as Category A, B, C or D in Merchant Shipping Notice MSN 1758(M), or in any subsequent Merchant Shipping Notice amending or replacing that Notice which the Secretary of State considers relevant from time to time;
Categorised waters means waters categorised as Category A, B, C or D in Merchant Shipping Notice 1837(a);

Examples of Categorised waters in a sentence

  • It should only apply to over 24m FVs where they are working in Categorised waters; e.g. Mussel Dredgers.

  • Against this background it is difficult to justify allowing a boatmaster to go up to three miles to sea with 250 passengers (or within Categorised waters with unlimited numbers) on the basis of a practical and oral test, with no formal training or specified period of experience.

  • MoD or CF Powerboats operated inshore and /or inland within MCA Categorised waters A – D are to be inspected in accordance with the following 5-year plan to BSS / RYA standards.

  • It should be noted this Directive is applicable to seagoing ships only and does not cover ships operating on UK Categorised waters; such ships will continue to come under the scope of UK national reporting requirements.

Related to Categorised waters

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Reference evapotranspiration or “ETo” means a standard measurement of environmental parameters which affect the water use of plants. ETo is given expressed in inches per day, month, or year as represented in Appendix C of these Guidelines, and is an estimate of the evapotranspiration of a large field of four to seven-inch tall, cool-season grass that is well watered. Reference evapotranspiration is used as the basis of determining the Maximum Applied Water Allowances.

  • Used water means any water supplied by a public water supply system to a consumer's water system after it has passed through the service connection and is no longer under the control of the water supply official custodian.

  • Produced water means water extracted from the earth from an oil or natural gas production well, or that is separated from oil or natural gas after extraction.

  • Supplier of water means any person who owns or operates a public water system.

  • Injection Point means the Electric Interconnection Point.

  • Unpolluted water means water of quality equal to or better than the effluent criteria in effect or water that would not cause violation of receiving water quality standards and would not be benefited by discharge to the sanitary sewers and wastewater treatment facilities provided.

  • Potable water means water that is fit for human consumption;

  • Diameter at breast height (dbh) means the diameter of a tree at 4 1/2 feet above the ground measured from the uphill side.

  • Generator Forced Outage means an immediate reduction in output or capacity or removal from service, in whole or in part, of a generating unit by reason of an Emergency or threatened Emergency, unanticipated failure, or other cause beyond the control of the owner or operator of the facility, as specified in the relevant portions of the PJM Manuals. A reduction in output or removal from service of a generating unit in response to changes in market conditions shall not constitute a Generator Forced Outage.

  • Rated Voltage means the manufacturer’s design voltage at which the transmission system is designed to operate or such lower voltage at which the line is charged, for the time being, in consultation with Transmission System Users;

  • Critical Test Concentration or "(CTC)" means the specified effluent dilution at which the Permittee is to conduct a single-concentration Aquatic Toxicity Test.

  • Attachment point means a point on the network at which network assets are connected to assets owned by another person.

  • Peak tube potential means the maximum value of the potential difference across the x-ray tube during an exposure.

  • Navigable waters ’ means the waters of the United States, including the territorial sea;

  • Sound level meter means an instrument which includes a microphone, amplifier, RMS detector, integrator or time averager, output meter, and weighting networks used to measure sound pressure levels.

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • Bottled water means water that is placed in a safety sealed container or package for

  • Meet Point A point, designated by the Parties, at which one Party’s responsibility for service begins and the other Party’s responsibility ends.

  • Measurement Point means the emission source for which continuous emission measurement systems (CEMS) are used for emission measurement, or the cross-section of a pipeline system for which the CO2 flow is determined using continuous measurement systems;

  • licensed water supplier means a company which is the holder for the time being of a water supply licence under Section 17A(1) of the 1991 Act(f);

  • Calibration gas means a gas mixture used to calibrate gas analysers.

  • Residual disinfectant concentration means the concentration of disinfectant measured in mg/L in a representative sample of water.

  • Meet-Point Billing (MPB) refers to the billing associated with interconnection of facilities between two or more LECs for the routing of traffic to and from an IXC with which one of the LECs does not have a direct connection. In a multi-xxxx environment, each Party bills the appropriate tariffed rate for its portion of a jointly provided Switched Exchange Access Service.

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.