Examples of Cast iron pipe in a sentence
Each gasket must be suitably confined and retained under compres- sion by a separate gland or follower ring.(c) Cast iron pipe may not be joined by threaded joints.
C.I. pipe conforming to B.S.S. No. 78 Class B or B.S.S. 1211/45 Class B of R.C.C pipe, Cast iron pipe shall be of the plain spigot and socket type filled in with lead and properly caulked and finished.
Cast iron pipe is subject to internal corrosion, called tuberculation, which causes buildup on the pipe interior, leading to water quality issues, reduced flow and pressures, and leakage.
Cast iron pipe and fittings shall be made from a minimum of 95 percent post-consumer recycled material.
Cast Iron Pipe Sleeves: Cast iron pipe sleeves shall be standard weight cast iron pipe with plain ends conforming to ASTM A74 and CISPI – 301.
Cast iron pipe and fittings as manufactured by Charlotte, Tyler, AB & I, or approved equivalent.
Cast iron pipe sections exceeding 5 feet in length can be supported on maximum 10 foot centers provided hangers are installed within 18 inches of each joint and fitting.
Cast iron pipe shall first be fully cleaned and painted with a "nonbleed" primer.
Cast iron pipe shall conform to the American Water Works Association specifications for this pipe.
Cast iron pipe and fittings shall not be used.(b) Piping and tubing shall conform to section 2—‘‘Industrial Gas and Air Piping’’—Code for Pressure Piping, ANSI B31.1–1967 with addenda B31.1– 1969, which is incorporated by reference as specified in § 1910.6.(c) Joints in piping and tubing may be made by welding or brazing or by use of flanged, threaded, socket, or compression fittings.