Can coating definition

Can coating means exterior coating and interior spray coating in two-piece can lines, interior and exterior coating in sheet coating lines for three-piece cans, side seam spray coating and interior spray coating in can fabricating lines for three-piece cans, and sealing compound application and sheet coating in end coating lines.
Sample 1Sample 2Sample 3
Can coating means any protective, decorative or functional coating applied onto the surface of a can or a metal sheet or metal part which is made into a can.
Sample 1Sample 2Sample 3

Examples of Can coating in a sentence

  • Can coating: The application of a coating material to a single walled container that is manufactured from metal sheets thinner than 29 gauge (0.0141 in.).

  • The surface coating of metal cans at this source is subject to 326 IAC 8-2-3, Can coating operations; therefore, 326 IAC 8-2-9 does not apply to the surface coating of metal cans due to this modification.

  • Can coating (a) sheet basecoat4.620.55(b) can exterior4.620.55(c) interior body spray10.051.20(d) two piece can end exterior10.051.20(e) side-seam spray21.922.63(f) end sealing compound7.320.882.

  • This category includes several source types: Fabric, Printing, Coating and Dyeing; Large Appliances; Metal Can coating, Metal Coil coating; Metal Furniture coating; Misc.

  • Plastisol coatings should not be included in calculations.(7) Can coating.

  • Can coating facility means a facility that includes one or more can coating line(s).

  • Can coating line means a coating line in which any protective, decorative, or functional coating is applied onto the surface of cans or can components.

  • Plastisol coatings should not be included in calcula- tions.][(7) Can coating.

  • Can coating - The coating of cans for beverages (in- cluding beer), edible products (including meats, fruit, vegetables, and others), tennis balls, motor oil, paints, and other mass-produced cans.

  • Can coating, printing, chemical processing, and semiconductor manufacturing are among the industries utilizing this technology.

Related to Can coating

  • Flat coating means a coating that is not defined under any other definition in this section and that registers gloss less than 15 on an 85-degree meter or less than 5 on a 60-degree meter.

  • Clear coating means a transparent coating designed to provide the final gloss and resistance properties of the coating system;

  • Roll coating means the application of a coating material to a substrate by means of hard rubber or steel rolls.

  • Specialty coating means any coating that is manufactured and used for one (1) of the following specialized applications:

  • Metallic coating means a coating which contains more than five grams of metal particles per liter of coating, as applied. Metal particles are pieces of a pure elemental metal or a combination of elemental metals.

  • Nuclear coating means any protective coating used to seal porous surfaces, such as steel or concrete, that otherwise would be subject to intrusion by radioactive materials. These coatings must be resistant to long term (service life) cumulative radiation exposure (ASTM D4082-83**), relatively easy to decontaminate (ASTM D4256-83**), and resistant to various chemicals to which the coatings are likely to be exposed (ASTM 3912-80**). General protective requirements are outlined by the Department of Energy (formerly United States Atomic Energy Commission Regulatory Guide 1.54**).

  • Coating means a material applied onto or impregnated into a substrate for protective, decorative, or functional purposes. Such materials include, but are not limited to, paints, varnishes, sealers, and stains.

  • Touch-up coating means a coating used to cover minor coating imperfections appearing after the main coating operation.

  • Floor coating means an opaque coating that is labeled and designed for application to flooring, including but not limited to, decks, porches, steps, and other horizontal surfaces which may be subject to foot traffic.

  • Antenna coating means a coating labeled and formulated exclusively for application to equipment and associated structural appurtenances that are used to receive or transmit electromagnetic signals.

  • Dip coating means the application of a coating material to a substrate by dipping the part into a tank of the coating material.

  • Flow coating means a coating labeled and formulated exclusively for use by electric power companies or their subcontractors to maintain the protective coating systems present on utility transformer units.

  • Topcoat means a coating that is applied over a primer on an aerospace vehicle or component for appearance, identification, camouflage, or protection. Topcoats that are defined as specialty coatings are not included under this definition.

  • Air dried coating means a coating that is dried by the use of air or forced warm air at temperatures up to 1940F (900C).

  • Pretreatment coating means a coating which contains no more than 12% solids by weight, and at least 0.5% acid by weight, is used to provide surface etching, and is applied directly to metal surfaces to provide corrosion resistance, adhesion, and ease of stripping.

  • factory means any premises including the precincts thereof—

  • Basecoat means a coat of colored material, usually opaque, that is applied before graining inks, glazing coats, or other opaque finishing materials and is usually topcoated for protection.

  • Boathouse (NR 115.03(1h)) means a permanent structure used for the storage of watercraft and associated materials and includes all structures which are totally enclosed, have roofs or walls or any combination of these structural parts.

  • Undercoating means any aerosol product designed to impart a protective, non-paint layer to the undercarriage, trunk interior, and/or firewall of motor vehicles to prevent the formation of rust or to deaden sound. “Undercoating” includes, but is not limited to, rubberized, mastic, or asphaltic products.

  • Repair coating means a coating used to re-coat portions of a previously coated product which has sustained mechanical damage to the coating following normal coating operations.

  • Low-solids coating means a coating containing 0.12 kilogram or less of solids per liter (one pound or less of solids per gallon) of coating material.

  • Plastics means synthetic materials chemically formed by the polymerization of organic (carbon-based) substances. Plastics are usually compounded with modifiers, extenders, and/or reinforcers and are capable of being molded, extruded, cast into various shapes and films or drawn into filaments.

  • Tire means a continuous solid or pneumatic rubber covering encircling the wheel of a tractor or other farm machinery or of a vehicle.

  • Solutions means Products and Services provided under this “CPE Products & Services; Professional Services” Section.

  • Oxides of nitrogen means the sum of the volume mixing ratio (ppbv) of nitrogen monoxide (nitric oxide) and nitrogen dioxide expressed in units of mass concentration of nitrogen dioxide (µg/m3);

  • Faux finishing coating means a coating labeled and formulated as a stain or a glaze to create artistic effects including, but not limited to, dirt, old age, smoke damage, and simulated marble and wood grain.