Brake torque definition

Brake torque means the product of the frictional forces resulting from the tangential actuating forces in a brake assembly and the distance between the points of generation of these frictional forces and the axis of rotation. The brake torque is a function of the hydraulic piston area, apparent friction coefficient, and the effective brake radius of the brake corner.
Sample 1Sample 2Sample 3

Examples of Brake torque in a sentence

  • Figure 10: Brake torque values versus rotational speed for different nanoparticle-diesel fuel blends at full engine loadAs observed, for all blends, with increasing the rotational speed, the brake torque increased.

  • Brake torque measurement for the torque wheel test (S6.4.3) If applicable, the vehicle shall be fitted with torque wheels at each wheel position, including slip ring assemblies and wheel speed indicators to permit wheel lock to be detected.

  • Maximum Brake torque: ....................................................................................

  • Apart from the Petitioner, the following persons filed witness affidavits:- John Mauti Machini (PW2), Karen Nyamoita Magara (PW3) and Richard Orenge Mokera who was not called to testify.

  • Brake torque (MB) load was 45 Nm. Scheme of laboratory equipment is shown in Fig.

  • Brake torque TProduct of the frictional forces resulting from the actuation forces in a brake assembly and the distance between the points of generation of these frictional forces and the axis of rotation.The torsional moment around the brake axis (opposing the vehicle movement in the travel direction) generated by the application of a clamping force on the brake pads against the brake disc, or on the brake shoes against the brake drum.

  • Brake torque is generally represented as a regressed func- tion of Wcyl, A/F, N, and ignition timing.

  • Brake torque springs shall be external torque springs, infinitely adjustable down to 40 percent of full rated torque, and shall be fully enclosed with calibrated torque and range of torque indicator.

  • Brake torque settings shall be clearly identified and accurately adjustable.

  • Brake torque shall be set in the shop, verified with a torque wrench (or comparable method approved by the Engineer) and adjusted to within 10% of the required setting; the brake torque shall be rechecked at installation in the field per the approved method and adjusted as required.

Related to Brake torque

  • Bulkhead means an airtight structure separating the working chamber from free air or from another chamber under a lower pressure than the working pressure;

  • Compartment means a part of the EU guarantee defined in terms of the origin of the resources backing it;

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • Sailboat means the same as that term is defined in Section 73-18-2.