Black coating definition

Black coating means a coating which meets a maximum lightness of 23 units, and has a saturation of less than 2.8, where saturation equals the square root of A² + B². These criteria are based on Cielab color space, 0/ 45 geometry. For spherical geometry, specular included, the maximum lightness is 33 units.
Sample 1Sample 2Sample 3
Black coating means, for purposes of 35 Ill. Adm. Code 218 and 219, a coating that meets both of the following criteria, based on Cielab color space, 0/45 geometry:
Sample 1Sample 2Sample 3
Black coating means a coating which meets both of the following criteria:
Sample 1Sample 2Sample 3

Examples of Black coating in a sentence

  • Black areas on the baffle are the proprietary Deep Space Black coating from N-Science.

  • Black coating on plastic (red car of #17044)(sample weight : 45.0mg).

  • Black coating consistently provides uniform emissivity over the plate for the infrared thermography to determine the temperature profiles accurately.

  • The terms defined in adopted new subparagraphs (A) - (O) include: Adhesion prime; Black coating; Business machine; Clear coat- ing; Coating of plastic parts of automobiles and trucks; Coat- ing of business machine plastic parts; Electrostatic prep coat; Flexible coating; Fog coat; Gloss reducer; Red coating; Resist coat; Stencil coat; Texture coat; and Vacuum-metalizing coat- ings.

  • Such pedofeatures are almost always in the order:- Soil Groundmass- Clay coating- Black coating- Silty coatings- Void.

  • The manufacturing of cryopumps employs two important processes which are Black coating of chevron baffles and joining process of total 210 × 4 joints with the LN2 pipes.

  • Black coating - Coating shall meet Federal Standard 595, Color No. 37038 and shall be applied to the front facing sign border of the CMS Model 700 Series housing including screen assemblies, Control Cabinet Door, and each PMM.

  • Black coating on science classrooms sinks at Rooms 301, 303, 303A and 306.

  • Black coating of the middle layer provides a sharp edge at the platform-liquid interface while the liquid meniscus provides an edge at the liquid-air interface due to change in refractive index 56Figure 3-2: Basic principle of the volume measurement technique.

  • Black coating for the plant doesn’t show any improvement on the rate of yield of biogas.


More Definitions of Black coating

Black coating means a coating that meets al of the following criteria:
Sample 1
Black coating means a coating that meets all of the following criteria:
Sample 1
Black coating means a coating that meets both of the following criteria:
Sample 1

Related to Black coating

  • Flat coating means a coating that is not defined under any other definition in this section and that registers gloss less than 15 on an 85-degree meter or less than 5 on a 60-degree meter.

  • Metallic coating means a coating which contains more than five grams of metal particles per liter of coating, as applied. Metal particles are pieces of a pure elemental metal or a combination of elemental metals.

  • Roll coating means the application of a coating material to a substrate by means of hard rubber or steel rolls.

  • Clear coating means a transparent coating designed to provide the final gloss and resistance properties of the coating system;

  • Coating means a material applied onto or impregnated into a substrate for protective, decorative, or functional purposes. Such materials include, but are not limited to, paints, varnishes, sealers, and stains.

  • Topcoat means a coating that is applied over a primer on an aerospace vehicle or component for appearance, identification, camouflage, or protection. Topcoats that are defined as specialty coatings are not included under this definition.

  • Touch-up coating means a coating used to cover minor coating imperfections appearing after the main coating operation.

  • Pretreatment coating means a coating which contains no more than 12% solids by weight, and at least 0.5% acid by weight, is used to provide surface etching, and is applied directly to metal surfaces to provide corrosion resistance, adhesion, and ease of stripping.

  • Floor coating means an opaque coating that is labeled and designed for application to flooring, including but not limited to, decks, porches, steps, and other horizontal surfaces which may be subject to foot traffic.

  • Nuclear coating means any protective coating used to seal porous surfaces, such as steel or concrete, that otherwise would be subject to intrusion by radioactive materials. These coatings must be resistant to long term (service life) cumulative radiation exposure (ASTM D4082-83**), relatively easy to decontaminate (ASTM D4256-83**), and resistant to various chemicals to which the coatings are likely to be exposed (ASTM 3912-80**). General protective requirements are outlined by the Department of Energy (formerly United States Atomic Energy Commission Regulatory Guide 1.54**).

  • Specialty coating means any coating that is manufactured and used for one (1) of the following specialized applications:

  • Falconry means the sport of taking quarry by means of a trained raptor.

  • Air dried coating means a coating that is dried by the use of air or forced warm air at temperatures up to 1940F (900C).

  • Flow coating means a coating labeled and formulated exclusively for use by electric power companies or their subcontractors to maintain the protective coating systems present on utility transformer units.

  • Antenna coating means a coating labeled and formulated exclusively for application to equipment and associated structural appurtenances that are used to receive or transmit electromagnetic signals.

  • Basecoat means a coat of colored material, usually opaque, that is applied before graining inks, glazing coats, or other opaque finishing materials and is usually topcoated for protection.

  • Undercoating means any aerosol product designed to impart a protective, non-paint layer to the undercarriage, trunk interior, and/or firewall of motor vehicles to prevent the formation of rust or to deaden sound. “Undercoating” includes, but is not limited to, rubberized, mastic, or asphaltic products.

  • Sternlight means a white light placed as nearly as practicable at the stern showing an unbroken light over an arc of the horizon of 135 degrees and so fixed as to show the light 67.5 degrees from right aft on each side of the vessel.

  • Faux finishing coating means a coating labeled and formulated as a stain or a glaze to create artistic effects including, but not limited to, dirt, old age, smoke damage, and simulated marble and wood grain.

  • Dip coating means the application of a coating material to a substrate by dipping the part into a tank of the coating material.

  • Cyberbullying means any form of communication by electronic act that is sent with the purpose to:

  • Low-solids coating means a coating containing 0.12 kilogram or less of solids per liter (one pound or less of solids per gallon) of coating material.

  • Crop Tree means the largest undamaged conifer trees with good form and free of disease.

  • Edge of any water means the outer edge of the water's bankfull width or, where applicable, the outer edge of the associated channel migration zone.

  • Spirits means any beverage which contains alcohol obtained by distillation mixed with drinkable water and other substances in solution, including, but not limited to, brandy, rum, whisky, and gin.

  • Falcon has the meaning set forth in the preamble to this Agreement.