BITS definition

BITS means the Fire Department’s Bureau of Investigations and Trials, located at 9 MetroTech Center, Brooklyn, New York 11201 -3857, that is responsible for investigating and adjudicating disciplinary matters, including conducting drug and/or alcohol testing based on reasonable suspicion or pursuant to stipulation..
Sample 1

Examples of BITS in a sentence

  • Vivek Bihani - Director (Independent)• Vivek is an Engineer from BITS, Pilani and an MBA from IIM, Bangalore.

  • When a rule has been adopted, the “class of persons affected” is primarily those who have a need to know the standards to which their conduct will be held.

  • Further, if the Institute is unable to allot any center of your choice, you will be allotted a center either at Pilani or at Goa or at Hyderabad campuses of BITS.

  • The final list of centers and actual days of operation will be announced to candidates through the BITS website www.bitsadmission.com .

  • The candidate can also check and print his score report at the BITS website after all the tests are completed.

  • Lucent India, Texas, L&T, HCL, Wipro Technologies, BITS, IIT, BEL, HAL, ISRO,DRDO, BARC, ECIL, Messung, Thermax, Honeywell Cyrus logic L&T EMSYS to name a few.

  • Further information on coordination of benefits with Medicare or other third-party payers can be found in rules: OAC 5160-1-08 and 5160-1-05 and in MITS BITS on Medicare enrollment.

  • In order to facilitate a large number of students all over India to participate in this test, apart from Pilani, Goa and Hyderabad campuses of BITS where it is expected that a large number of students will take the test, the Institute is also planning to offer the tests at dedicated test centers in several cities.

  • Mann also was of the view that the umbrella clause in the BITS protects the investor against a mere breach of contract: “this is a provision of particular importance in that it protects the investor against any interference with his contractual rights, whether it results from a mere breach of contract or a legislative or administrative act, and independently of the question whether or no such interference amounts to expropriation.

  • The Issuer will pay Cash Interest on the PIK Notes and Additional Interest, if any, to the Persons who are registered Holders of PIK Notes at the close of business on the March 31, June 30, September 30 and December 31 (whether or not a Business Day), as the case may be, next preceding the Interest Payment Date, even if such PIK Notes are canceled after such Record Date and on or before such Interest Payment Date, except as provided in Section 2.12 of the Indenture with respect to defaulted interest.

Related to BITS

  • Outputs means the goods or services that are produced by an entity or other person;

  • Images means all types of visual content, including without limitation still photography, motion film or video and may include audio elements, whether generated optically, electronically, digitally or by any other means, and shall include all metadata, keywords, descriptions and captions associated therewith. Any reference to Images includes the whole or the part.

  • Cell means a single encased electrochemical unit containing one positive and one negative electrode which exhibits a voltage differential across its two terminals.

  • Scaling as used herein, involves:

  • Capture means the process of buffering EDR data in a temporary, volatile storage where it is continuously updated at regular time intervals.

  • Output means the exposure rate, dose rate, or a quantity related in a known manner to these rates from a brachytherapy source or a teletherapy, remote afterloader, or gamma stereotactic radiosurgery unit for a specified set of exposure conditions.

  • Slash means all debris created on the Work area by the precommercial thinning operation.

  • Scale means the height, width and length of each building proposed within the development in relation to its surroundings;

  • Fiber means a glass strand or strands which is/are protected by a color coded buffer tube and which is/are used to transmit a communication signal along the glass strand in the form of pulses of light.

  • reprocessing means the process carried out on a used device in order to allow its safe reuse including cleaning, disinfection, sterilisation and related procedures, as well as testing and restoration of the technical and functional safety of the used device;

  • SPID is the number that identifies a service provider to the relevant NPAC. The SPID may be a state-specific number. "Serving Wire Center" denotes the CenturyLink building from which dial tone for local Exchange Service would normally be provided to a particular End User Customer premises. "Signaling System 7" or "SS7" is an out-of-band signaling protocol consisting of four basic sub- protocols:

  • Tool means the tool developed in accordance with Section 35A-15-303.

  • Filter means material placed in the useful beam to preferentially absorb selected radiations.

  • Loader means any type of off-road tractor with either tracks or rubber tires that uses a bucket on the end of movable arms to lift and move material; can be also referred to as a front-end loader, front loader, skid steer loader, backhoe, rubber- tired loader, or wheeled loader.

  • Fuel means any solid, liquid or gaseous combustible material;

  • Bioassay means the determination of kinds, quantities or concentrations and, in some cases, the locations of radioactive material in the human body, whether by direct measurement, in vivo counting, or by analysis and evaluation of materials excreted or removed from the human body. For purposes of these rules, “radiobioassay” is an equivalent term.

  • Digital Cross Connect System or "DCS" is a function which provides automated Cross Connection of Digital Signal Level 0 (DS0) or higher transmission bit rate digital channels within physical interface facilities. Types of DCS include but are not limited to DCS 1/0s, DCS 3/1s, and DCS 3/3s, where the nomenclature 1/0 denotes interfaces typically at the DS1 rate or greater with Cross Connection typically at the DS0 rate. This same nomenclature, at the appropriate rate substitution, extends to the other types of DCS specifically cited as 3/1 and 3/3. Types of DCS that cross connect Synchronous Transport Signal level 1 (STS-1 s) or other Synchronous Optical Network (SONET) signals (e.g., STS-3) are also DCS, although not denoted by this same type of nomenclature. DCS may provide the functionality of more than one of the aforementioned DCS types (e.g., DCS 3/3/1 which combines functionality of DCS 3/3 and DCS 3/1). For such DCS, the requirements will be, at least, the aggregation of requirements on the "component" DCS. In locations where automated Cross Connection capability does not exist, DCS will be defined as the combination of the functionality provided by a Digital Signal Cross Connect (DSX) or Light Guide Cross Connect (LGX) patch panels and D4 channel banks or other DS0 and above multiplexing equipment used to provide the function of a manual Cross Connection. Interconnection is between a DSX or LGX to a Switch, another Cross Connection, or other service platform device.

  • Postproduction means an activity related to the finishing or duplication of a medium described in Subsection 59-12-104(54)(a).

  • PNode has the meaning set forth in the CAISO Tariff.

  • Programming means the process of organisation, decision-making and allocation of financial resources in several stages, with the involvement of partners in accordance with Article 5, intended to implement, on a multi-annual basis, joint action by the Union and the Member States to achieve the objectives of the Union strategy for smart, sustainable and inclusive growth;

  • Node means an area designated by the State Planning Commission concentrating facilities and activities which are not organized in a compact form.

  • Assay means a laboratory analysis of Crude Petroleum to include the following: A.P.I. Gravity, Reid vapor pressure, composition, pour point, water and sediment content, sulfur content, viscosity, distillation, hydrogen sulfide, flash/boiling point and other characteristics as may be required by Carrier.

  • Feed means feed as defined in point (4) of Article 3 of Regulation (EC) No 178/2002;

  • BACS means the Banks Automated Clearing System;

  • Reception means a social gathering. Receptions are often held for the purpose of extending a ceremonial or formal welcome and may include private or public meetings during which guests are honored or welcomed. Food and beverages are often provided, but not as a plated, sit-down meal.

  • Production means a method of obtaining goods including manufacturing, assembling, processing, raising, growing, breeding, mining, extracting, harvesting, fishing, trapping, gathering, collecting, hunting and capturing.