Bi-Directional definition

Bi-Directional means that traffic up to the designated capacity can travel in each direction simultaneously.
View Source
Bi-Directional means the ability to move, transfer, or transmit in both directions.
View Source
Bi-Directional means that within the framework of the DCC protocol there is a flow of information not only in the di- rection of the decoders, but also in the opposite direction; i.e. not only run commands, function commands, control commands, etc. to the decoders, but also feedback messages such as reception confirmations, speed measure- ments, other status information and CV readouts from the decoders to the digital control centre or "local detectors".
View Source

Examples of Bi-Directional in a sentence

  • Table 2-3: Management Interface Pins (MDIO) Pin # Symbol Description I/O Logic ³+ ³/ Pull-up /down 89 GLB_ALRMn Global Alarm O 3.3V LVCMOS OK Alarm 92 MDC MDIO Clock I 1.2V LVCMOS 91 MDIO Management Data Input Output Bi-Directional Data I/O 1.2V LVCMOS 90 MOD_SELn Module Select I 3.3V LVCMOS De- select Select Pull-Up3 3 Pull-Up resistor (4.7 kOhm to 10 kOhm) is located within the CFP8 module For CFP8, the MOD_SELn pin replaces the PRTADR pins used on CFP/CFP2/CFP4.

  • Table 2-3: Management Interface Pins (MDIO) Pin # Symbol Description I/O Logic “H” “L” Pull-up /down 89 GLB_ALRMn Global Alarm O 3.3V LVCMOS OK Alarm 92 MDC MDIO Clock I 1.2V LVCMOS 91 MDIO Management Data Input Output Bi-Directional Data I/O 1.2V LVCMOS 90 MOD_SELn Module Select I 3.3V LVCMOS De- select Select Pull-Up3 3 Pull-Up resistor (4.7 kOhm to 10 kOhm) is located within the CFP8 module For CFP8, the MOD_SELn pin replaces the PRTADR pins used on CFP/CFP2/CFP4.

  • Pin # Symbol Description I/O Logic “H” “L” Pull-up /down 13 GLB_ALRMn Global Alarm O 3.3V LVCMOS OK Alarm 18 MDIO Management Data Input Output Bi-Directional Data I/O 1.2V LVCMOS 19 PRTADR0 MDIO Physical Port address bit 0 I 1.2V LVCMOS per CFP MSA MIS Ref.

  • Bi-Directional (AVG-B) The AVG-B capability is intended for use at interior access control points where personnel and vehicles have already been screened once for initial access onto the Navy installation and are now seeking entry into a restricted- access Enclave area.

  • Victorville-▇▇▇▇ - Adelanto Azusa, Los Angeles Bi-Directional Los Angeles - Azusa Adelanto- Victorville/▇▇▇▇ FTS DWP No. 10345 (5) See Notes 19 MW Summary- details are in each agreement.

  • Paid by Owners Bi-Directional Amplifier (BDA) BDAs provide RF coverage in locations that have little/no coverage through normal propagation.

  • Bi-Directional Amplifiers (BDAs) BDAs provide RF coverage in locations that have little to no coverage, normally within buildings/enclosed structures where RF is unable to penetrate adequately.

  • The ▇▇▇▇▇▇▇ Division and Traffic Unit each have one (1) non-channelized mobile repeater acting as a Bi-Directional Amplifier (BDA) to enhance RF coverage in the ▇▇▇▇▇▇▇ and West Gate facilities.

  • DAS, Distributed Antenna System, BDA, Bi-Directional Amplifier, Bi-Directional Antenna, Cellular Amplifier, Cellular Repeater, Cellular Coverage, Cell Booster, Cellular Booster, IONB, CommScope, Corning, SOLiD, JMA, P25, Public Safety, ERRC, Emergency Radio Responder Communication, Wireless Cellular, Commercial Wireless.

  • WPC Connect is funded under Delivery Infrastructure in all Program Years.‌ Bi-Directional Functionality SNC will work with CalOptima and the other participating entities to have access to available CalOptima care plans that may exist for the beneficiary.


More Definitions of Bi-Directional

Bi-Directional means the ability to move, transfer, or transmit data in both directions.
View Source
Bi-Directional means two uni-directional signals being transmitted in opposite directions.
View Source