Baffle definition
Examples of Baffle in a sentence
Nutrient Separating Baffle Box CCP-1HF Contech Construction Products Continuous Deflective Separator (CDS) FCT-1HF Fresh Creek Technologies, Inc.
Baffle system shall be designed to mitigate noise and to keep errant rounds contained within the range, preventing damage to the structure of the building.
As part of the Orange County Environmental Protection Division’s (EPD) commitment to preserving and managing the County’s lake systems and compliance with National Pollutant Discharge Elimination System (NPDES) and Total Maximum Daily Loads (TMDL), the Contractor shall perform cleaning of stormwater sediment removal structures [Continuous Deflective Separation (CDS) units, Modular Wetlands, Nutrient Separating Baffle (NSB) boxes, and Sediment Sump].
Refer to Division 10 Riprap, Class A, B, 1, and 2 1042 Geotextile for Drainage, Type 2 1056 Coir Fiber Baffle 1640-2 Use suitable excavated materials, as specified in Sections 225, 230 and 240 of the Standard Specifications in the construction of earth embankments for borrow pit dewatering basins, except where otherwise specified.
Bag Type: Baffle Size: 40x40x45 Capacity: 2200 lbs Safety Ratio: 5:1 Fabric: Uncoated Fabric, 200 GSM Top: Spout Top 14” Diameter x 18” Long Bottom: Spout bottom 14” diameter x 18” long, with Iris Closure Loops: 4 x 8” corner loops Print: 4 Sides / 3 Colors Doc.
If the oil baffle wall (Baffle A) and flow control wall (Baffle B) are not integrally cast-in to riser/wall sections then the Baffle wall panels shall be placed in the formed keyways or between Vortechs® System Technical Specification SECTION 02721 5 bolted-in-place angle flanges as provided by the manufacturer.
Bidder shall provide Baffle walls to meet the Statutory and TAC requirement.
The following parts will be fabricated by machine shops outside APEX: 162 Anchor Pin Dwg TRB-1, Rev 0, dated 7/21/99, Baffle Pivot Dwg TRB-3, Rev 0, dated 7/25/99 Sleeve Dwg TRB-4, Rev 0, dated 7/21/99 Br▇▇ Dwg TRB-5, Rev 0, dated 7/21/99 The springs required to produce the 10,000 Turbolator(R) assemblies covered by, this purchase agreement will be provided by the Buyer at no cost.
All the Baffle Ring Casting in Six Segments is to be supplied as specified in individual purchase orders/applicable Drawing & specification.
The OPTIFLOW 270®B Exit Baffle shall provide vertical flow separation within the chamber and reduce the ▇▇▇▇ effect at the outlet, preventing grit from escaping before it is drawn into the center for removal.