Automatic Control System definition

Automatic Control System means an on-site computerized system with sensors and programs that can adjust and control domestic wastewater or water treatment plant equipment and processes over the normal range of expected operating conditions without operator assistance.
Automatic Control System means a system that utilizes programming logic to automate the operation of the instrumentation and systems required in Paragraph 137 of this Consent Decree so as to produce the operational results required in Paragraph 139 of this Consent Decree.
Automatic Control System means a system that utilizes programming logic to automate the operation of the instrumentation and systems so as to produce the operational results.

Examples of Automatic Control System in a sentence

  • Make provision for the following control functions unless otherwise specified in the Particular Specification or Drawings:- - Manual on/off (maintenance/manual mode); - On/off by the Automatic Control System as scheduled; and - On/off by special demand overriding the pre-set schedule for dehumidification and/or cooling during night purging or other special duty cycles as specified.

  • Exception to Part of the Work Practice Standards in Subparagraphs 43.a and 43.b. MPC manually may override the operation of the Automatic Control System required in Subparagraph 43.a (for control of Supplemental Gas flow rate) and 43.b (for control of Total Steam Volumetric Flow Rate) if the exception in Paragraph 50 applies, and/or during Startup, Shutdown, or Malfunction of a process unit that feeds the Covered Flare, and/or to achieve the following:a.

  • Automatic Control System for Thermal Comfort Based on Predicted Mean Vote and Energy Saving.

  • By no later than the applicable date in Appendix C - 2.1, for all Covered Flares utilizing the instrumentation and controls required to be installed pursuant to Paragraphs 114, 117-119, and 122, above and Paragraph 144 below, as provided in Appendix C - 2.1, Settling Defendants shall install and operate on each such Covered Flare an Automatic Control System that shall automate the control of the Supplemental Gas flow rate to the respective Covered Flare as set forth in Appendix C - 2.1.

  • For more detailed information on the system startup, trouble shooting and valve/control installation, follow the manufacturers’ instructions included with the automatic control system.Refer to Automatic Control System Overview.Chapter 6: System Start-Up, Testing, and TroubleshootingVacuum Relief Valve Test• When the solar system is first turned on, air in the collectors will be expelled into the pool and bubbles will appear.

  • Training and familiarization upon new or substantially modified Automatic Control System is required in all cases.

  • Monitoring equipment/instrument downtime, override of Automatic Control System (“ASC”),and exceedances of emission standards, and compliance with Compressor availability requirements, as described in Paragraph 70 and 70A;e–g [Unchanged.]70.

  • TEP-27 became the most environmentally friendly power plant in Russia.Kvint, a hardware/software microprocessor- based control system, was commissioned for opera- tion with the Transformer Substation Automatic Control System of TEP-27.

  • We were especially interested in understanding the transition to a systems approach undertaken by a vanguard of American corporations.

  • Yang, A Study on Greenhouse Automatic Control System Based on Wireless Sensor Network, Wireless Pers.


More Definitions of Automatic Control System

Automatic Control System means a system that utilizes programming logic to automate the operation of the instrumentation and systems required in Condition 5)b)2.B.5)b) of this Permit so as to produce the operational results required in Condition 2.B.3)f) of this Permit.

Related to Automatic Control System

  • Vapor control system means a system that prevents release to the atmosphere of gasoline vapors in excess of 80 milligrams per liter of gasoline loaded (4.7 grains per liter).

  • Control system means the combination of capture and control devices used to reduce emissions to the atmosphere.

  • Emission control system means the electronic engine management controller and any emission related component in the exhaust or evaporative system which supplies an input to or receives an output from this controller.

  • air traffic control service means a service provided for the purpose of:

  • Traffic control signal means a device, whether manually, electrically, or mechanically operated, by which traffic is alternately directed to stop and permitted to proceed.

  • Inventory control system means a system described in Section 4-41a-103.

  • Electronic Control System means a combination of units, designed to co-operate in the production of the stated vehicle control function by electronic data processing. Such systems, often controlled by software, are built from discrete functional components such as sensors, electronic control units and actuators and connected by transmission links. They may include mechanical, electro-pneumatic or electro-hydraulic elements.

  • air traffic control unit means a generic term meaning variously, area control centre, approach control unit or aerodrome control tower;

  • Traffic control device means a flagger, sign, signal, marking, or other device used to regulate, warn or guide traffic, placed on, over, or adjacent to a street, highway, private road open to public travel, pedestrian facility, or shared-use path by authority of a public agency or official having jurisdiction, or, in the case of a private road open to public travel, by authority of the private owner or private official having jurisdiction.

  • approach control service means air traffic control service for arriving or departing controlled flights;

  • aerodrome control service means air traffic control service for aerodrome traffic;

  • Analytical x-ray system means a group of components utilizing x-rays to determine the elemental composition or to examine the microstructure of materials.

  • total system means the transmission system and the distribution system of the Board taken together;

  • Electronic Subcontracting Reporting System (eSRS) means the Governmentwide, electronic, web-based system for small business subcontracting program reporting. The eSRS is located at http://www.esrs.gov.

  • area control service means air traffic control service for controlled flights in control areas;

  • Electronic Funds Transfer (EFT) indicator means a four-character suffix to the unique entity identifier. The suffix is assigned at the discretion of the commercial, nonprofit, or Government entity to establish additional System for Award Management records for identifying alternative EFT accounts (see subpart 32.11) for the same entity.

  • Area Control Error or “ACE” shall mean the instantaneous difference between a Balancing Authority’s net actual and scheduled interchange, taking into account the effects of Frequency Bias and correction for meter error.

  • Non-Synchronized Reserve Event means a request from the Office of the Interconnection to generation resources able and assigned to provide Non-Synchronized Reserve in one or more specified Reserve Zones or Reserve Sub-zones, within ten minutes to increase the energy output by the amount of assigned Non-Synchronized Reserve capability. Non-Variable Loads:

  • Cabinet x-ray system means an x-ray system with the x-ray tube installed in an enclosure independent of existing architectural structures except the floor on which it may be placed. The cabinet x-ray system is intended to contain at least that portion of a material being irradiated, provide radiation attenuation, and exclude personnel from its interior during generation of radiation. Included are all x-ray systems designed primarily for the inspection of carry-on baggage at airline, railroad, and bus terminals, and in similar facilities. An x-ray tube used within a shielded part of a building, or x-ray equipment that may temporarily or occasionally incorporate portable shielding, is not considered a cabinet x-ray system.

  • Database Management System (DBMS) A system of manual procedures and computer programs used to create, store and update the data required to provide Selective Routing and/or Automatic Location Identification for 911 systems. Day: A calendar day unless otherwise specified. Dedicated Transport: UNE transmission path between one of CenturyLink’s Wire Centers or switches and another of CenturyLink’s Wire Centers or switches within the same LATA and State that are dedicated to a particular customer or carrier. Default: A Party’s violation of any material term or condition of the Agreement, or refusal or failure in any material respect to properly perform its obligations under this Agreement, including the failure to make any undisputed payment when due. A Party shall also be deemed in Default upon such Party’s insolvency or the initiation of bankruptcy or receivership proceedings by or against the Party or the failure to obtain or maintain any certification(s) or authorization(s) from the Commission which are necessary or appropriate for a Party to exchange traffic or order any service, facility or arrangement under this Agreement, or notice from the Party that it has ceased doing business in this State or receipt of publicly available information that signifies the Party is no longer doing business in this State.

  • Air pollution control equipment means a mechanism, device, or contrivance used to control or prevent air pollution, that is not, aside from air pollution control laws and administrative regulations, vital to production of the normal product of the source or to its normal operation.

  • Retirement system means a retirement plan or system that is established by or pursuant to title 38.

  • Database Management System (“DBMS”) is a computer process used to store, sort, manipulate and update the data required to provide Selective Routing and ALI.

  • Emission Control Strategy means any device, system, or strategy employed with a diesel-fueled CI engine that is intended to reduce emissions. Examples of emission control strategies include, but are not limited to, particulate filters, diesel oxidation catalysts, selective catalytic reduction systems, alternative fuels, fuel additives used in combination with particulate filters, alternative diesel fuels, and combinations of the above.

  • Disturbance Control Standard or “DCS” shall mean the reliability standard that sets the time limit following a disturbance within which a balancing authority must return its Area Control Error to within a specified range.

  • Implementation Period means the period from the date of signing of the Agreement and up to the issuance of Final Acceptance Certificate for the project.