ASTM Color definition

ASTM Color means color determined by the ASTM Standard method of test ASTM Designation D-1500-91 or latest revision thereof.
Sample 1Sample 2Sample 3
ASTM Color means color determined by the ASTM standard method of test ASTM Designation D-1500-64 or latest revision thereof. "Barrel" means 42 United States gallons at 60 degrees Fahrenheit and zero psi gauge.
Sample 1Sample 2Sample 3
ASTM Color means color determined by the American Society of Testing and Materials standard method of test ASTM Designation D-1500-64 or latest revision thereof.
Sample 1Sample 2Sample 3

Examples of ASTM Color in a sentence

  • R (1994)2.6ASTM D971 -Standard Test Method for Interfacial Tension of Oil Against Water by the Ring Method.2.7ASTM/D1500 -Standard Test Method for ASTM Color of Petroleum Products.

  • ASTM Color System:Standard colors conform to ASTM F934 and include:DarkGreen Brown BlackL28.6127.76 Other colors are available by special order.Sizes:PVC coated fabric is available in mesh sizes from 3/8 inch to 2 inches (10 mm to 50 mm), and in heights for 36 inches to 240 inches(910 mm to 6,100 mm).

  • D-1500 Standard Test Method for ASTM Color of Petroleum ProductsASTM Color ----- 2.5 Color Visual Undyed ----- D-1796 Standard Test Method for Water and Sediment in Fuel Oilsby the Centrifuge Method (Laboratory Procedure) <0.05Measures bottom sediment, water content and any non-usable Material in fuel.

  • Table 2Characterization results of Castor bean oil biodiesel Limit 6751-07b Test Result S.N PropertyTests ASTM B0B5B10B20B4OB80B100 Table 2Sample fuel SN(mg of KOH /gm of oil) IV(g of Iodine / 100 g of oil) B100 202.71 88.72 Saponification and iodine values Thus, biodiesel is safer to handle at higher temperatures than diesel.The ASTM Color Scale is widely utilized for the grading of petroleum products such as lubricating oil, heating oil and diesel fuel oil.

  • Gravimetric testing:Follow the same procedure for draining, handling and rating the exposed monitors against the ASTM Color Standard.Monitors containing either ‘matched weights’ or the pair of pre-weighed membrane filters shall be returned, without opening, to the laboratory for determination of the total contaminant.

  • Laboratory equipment e.g.Cold Filter Plugging Point (CFPP), ASTM Color of Petroleum Products (ASTM Color Scale) ASTM D-1500, Gum contents in Fuels by Jet Evaporation ASTM D-381, Flash Point ASTM D-92, Kinematic Viscosity Bath for 40 ºC & 100 ºC (ASTM D-445), Viscometers of various kind and constants, Hydrometers, BS&W ASTM D-1796 & D-4007, Automatic Distillation Unit ASTM D-86, Copper Strip Test ASTM D-130, Sediment in Crude Oils and Fuel Oils by the Extraction Method.

  • There are two color strips and one grey strip, each divided into eleven steps and assigned rating numbers from 0 to 10.Reference: “Specification for Color Rating Booklet” incorporating the ASTM Color Standards is available from ASTMCharts in use should be checked periodically against a reference set of color standards to eliminate the possibility that sunlight or soiling due to handling may have appreciably changed the colors.

  • The reference set is a set of ASTM Color standards obtained new, stored in dry dark conditions, and is only used for the purpose of checking the standards in day- to-day use.ASTM D2276 recommends that a production batch of ASTM Color rating books shall be considered acceptable for continued use until any color chip in the 0 to 5 range of scales A, B, or G has changed in lightness (value) as much as one rating number as indicated by the value (lightness) of the next lighter or darker color.

  • As a guide only, the different ASTM Color Standard scales can be indicative of certain conditions/phenomena.The ASTM Color standard scales were chosen during the original test method development as it is difficult to take a membrane with grey color and compare it to a brown color in terms of relative darkness.

  • The ASTM Color standards consist of three stepwise-graded scales intended to bracket in hue the color ordinarily encountered on jet fuel filter membranes.

Related to ASTM Color

  • ASTM means the American Society for Testing and Materials.

  • JetBrains or “We” means JetBrains s.r.o., having its principal place of business at Xx Xxxxxxxxx XX 0000/00, Xxxxxx, 00000, Xxxxx Xxxxxxxx, registered in the Commercial Register maintained by the Xxxxxxxxx Xxxxx xx Xxxxxx, Xxxxxxx X, Xxxx 00000, ID. No.: 265 02 275.

  • GMP means the amount proposed by Contractor and accepted by Owner as the maximum cost to Owner for construction of the Project in accordance with this Agreement. The GMP includes Contractor’s Construction Phase Fee, the General Conditions Cost, the Cost of the Work, and Contractor’s Contingency amount.

  • Submerged fill pipe means any fill pipe the discharge opening of which is entirely submerged when the liquid level is six inches [15.24 centimeters] above the bottom of the tank; or when applied to a tank which is loaded from the side, means any fill pipe the discharge opening of which is entirely submerged when the liquid level is one and one-half times the fill pipe diameter in inches [centimeters] above the bottom of the tank.

  • Participating Clinical Laboratory means a Clinical Laboratory which has a written agreement with the Claim Administrator or another Blue Cross and/or Blue Shield Plan to provide services to you at the time services are rendered.

  • Barrier means Barrier Level x R (initial).

  • cGMP means current Good Manufacturing Practices as specified in the United States Code of Federal Regulations, ICH Guideline Q7A, or equivalent laws, rules, or regulations of an applicable Regulatory Authority at the time of manufacture.

  • Non-Participating Clinical Laboratory means a Clinical Laboratory which does not have a written agreement with the Claim Administrator or another Blue Cross and/or Blue Shield Plan provide services to you at the time services are rendered.