AS2 definition

AS2 means the electronic data interchange protocol, used for the purpose of exchanging contractual data and dispatching information.
Sample 1Sample 2Sample 3

Examples of AS2 in a sentence

  • The door glass shall be see-through, AS-2 tint (70% luminous transmittance) safety glass.

  • Laminated or tempered glass (AS-2 or AS-3) is permitted in all other windows.

  • Glass in all side windows, doors and rear windows shall be AS-2 or better.

  • THE INTEREST SHORTFALL CARRYFORWARD AMOUNTS CLASS AS-1 0.00 CLASS AS-2 0.00 CLASS AS-3 0.00 CLASS MS-1 0.00 CLASS MS-2 0.00 CLASS BS 0.00 CLASS AN 0.00 CLASS MN 0.00 CLASS BN 0.00 14.

  • Reject vehicle if the side windows are comprised of a material other than safety glass AS-1, AS-2, AS-3, AS-10 and AS-11.

  • The trip generation data for Lyon Avenue (AS2) (detailed in Section 4.3.9) has been used to assess all intermediate and small scale sites in this report, where vehicle movements are expected to be the highest out of all these sites and therefore representing a worst case scenario.

  • AS-2 has not prescribed any method of valuation of inventories in the case of a service provider.

  • IF REMITTANCE RATES BASED ON THE NET FUNDS CAP, (A) NET FUNDS CAP FOR CLASS AS-1 N/A CLASS AS-2 N/A CLASS AS-3 N/A CLASS MS-1 N/A CLASS MS-2 N/A CLASS BS N/A CLASS AN N/A CLASS MN N/A CLASS BN N/A (B) WEIGHTED AVERAGE COUPON CAP FOR POOL I N/A 26.

  • The abstract service AS2 uses Web Service 1, which performs the required operations.

  • The Balancing Group Manager may submit its nominations by way of an Edig@s message sent via AS2 and/or by entering them using a web-based entry screen.

Related to AS2

  • CM means City Manager of COE appointed in terms of Section 82 of the Local Government: Municipal Structures Act 117 of 1998

  • Pistol means any firearm with a barrel less than sixteen inches in length, or is designed to be held and fired by the use of a single hand.

  • RFT means Request for Tender.

  • MDF means a Qwest distribution frame (e.g., COSMIC™ frame) used to connect Qwest cable pairs and line and trunk equipment terminals on a Qwest switching system. "Maintenance and Repair" involves the exchange of information between Carriers where one initiates a request for maintenance or repair of existing products and services or Unbundled Network Elements or combinations thereof from the other with attendant acknowledgments and status reports in order to ensure proper operation and functionality of facilities. "Maintenance of Service charge" is a Miscellaneous Charge that relates to trouble isolation work performed by Qwest. Basic Maintenance of Service charges apply when the Qwest technician performs work during standard business hours. Overtime Maintenance of Service charges apply when the Qwest technician performs work on a business day, but outside standard business hours, or on a Saturday. Premium Maintenance of Service charges apply when the Qwest technician performs work on either a Sunday or Qwest recognized holiday.

  • L1 means the lowest tender or lowest bid or the lowest quotation received in a tender, bidding process or other procurement solicitation as adjudged in the evaluation process as per the tender or other procurement solicitation.

  • SADC means the Southern African Development Community;

  • Inverter means, with respect to a PV System, the necessary device required to convert the variable direct electrical current (DC) output from a Solar Photovoltaic Panel into a utility frequency alternating electrical current (AC) that can be used by the related property, or that can be fed back into a utility electrical grid pursuant to an Interconnection Agreement.

  • PM10 means particulate matter with an aerodynamic diameter less than or equal to a nominal 10 micrometers as measured by the applicable reference method or an equivalent method.

  • M2 is the calendar month, expressed as a number, in which the day immediately following the last day of the Interest Period falls;

  • SQM means the specialist quality mark standard specified by us as at the Contract Start Date as amended by us provided that had the SQM been a Contract Document such amendments would not have been prohibited by Clause 13.1;

  • LCC-300 Cost Centre I EXTERNAL WORKS Lump Sum Breakdown I15 : Gas Main Lump Sum Item LSI15.1 I15.1 : Gas Main Contractor's Other Charges The Contractor shall enter hereunder any specific item of work or obligation or thing which is necessary for the execution of the Works, as required by the Contract, which has been omitted from or has not been separately itemised in this Lump Sum Breakdown and for which a separate charge is required. The unit of measurement for any Contractor's Other Charge shall be "sum", with Quantity and Rate columns entered with "N/A". ------------------------------------------------------------------------------------------------------------------- Total of Lump Sum Item LSI15.1 *** ------------ *** Certain information on this page has been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment has been requested with respect to the omitted portions. [STAMP]

  • coronavirus means severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2);

  • MGD means million gallons per day. "mg/l" means milligrams per liter. "ug/l" means micrograms per liter. "ng/l" means nanograms per liter. "S.U." means standard pH unit. "kg/day" means kilograms per day.

  • ACD means Threadneedle Investment Services Limited, the authorised corporate director of the Company.

  • PNode has the meaning set forth in the CAISO Tariff.

  • Workshop means any premises (including the precincts thereof) wherein any industrial process is carried on, but does not include any premises to which the provisions of section 67 of the Factories Act, 1948 (63 of 1948), for the time being, apply.

  • SOQ means Statement of Qualifications.

  • BOQ means Bill of Quantity or the Price Schedule in which rates for the e-tender should be quoted and uploaded online on the e-tender website.

  • NEMA means the National Environmental Management Act, 1998 (Act No. 107 of 1998);

  • Snow tyre means a tyre whose tread pattern, tread compound or structure is primarily designed to achieve in snow conditions a performance better than that of a normal tyre with regard to its ability to initiate or maintain vehicle motion."

  • EXXXX means the Commission’s Electronic Data Gathering, Analysis and Retrieval System.

  • IMRO means the Irish Music Rights Organisation CLG.

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • HRS means the Hawaii Revised Statutes.

  • Stack means any point in a source designed to emit solids, liquids, or gases into the air, including a pipe or duct but not including flares.

  • Touch-up coating means a coating used to cover minor coating imperfections appearing after the main coating operation.