As-built Model definition

As-built Model means the building information model(s) that fully captures the as-built conditions of the project & contain the relevant as-built drawings and data required. “BIM” means building information modelling and is the process and technology used to create a Model. “BIM Execution Plan” means the latest plan outlining the procedures and modelling protocol prepared in accordance with Clause 4. “BIM Manager” means the person, firm or corporation appointed by the Architect as BIM Manager, approved by the University. “BIM Coordinator” Means the person, firm or corporation appointed as the key coordinator on all BIM matters for the project.Each Consultant and the Contractor is required to appoint at least one (1) BIM Coordinator for the project. “Building Information Model” or “Model” means a digital representation of the physical and functional characteristics of the Project, used to describe a two dimensional representation, three dimensional representation, a Model Element (that is, a portion of the Model representing a component, system or assembly within the Project or Project site), a single Model or multiple Models used in aggregate or in federation, as well as other data representations, including Drawings, as identified in the BIM Execution Plan, defined by the Model Author and/or BIM Manager during model exchange and/or submittals. “Contribution” means the expression, design, data or information that a party in the Project creates or prepares, and shares with other parties in the Project for use in or in connection with a Released Model. Contribution includes Released Model(s). “Drawings” means two dimensional representations, hand sketches, perspective views or other graphical outputs printed physically orelectronically.
View Source

Related to As-built Model

  • As-Built Drawings and Specifications. A CADD-DXF file on CD-ROM, pdf versions of the drawings on CD-ROM, and a set of “Xerox” type blackline on bond prints of all “as-built” drawings and specifications of the Premises (reflecting all field changes and including, without limitation, architectural, structural, mechanical and electrical drawings and specifications) prepared by Tenant’s Architect and Engineers or by Contractors (defined below) shall be delivered by Tenant at Tenant’s expense to the Landlord within thirty (30) days after completion of the Tenant Work. If Landlord has not received such drawings and CD-ROM(s) within thirty (30) days, Landlord may give Tenant written notice of such failure. If Tenant does not produce such drawings and CD-ROM(s) within ten (10) days after Landlord’s written notice, Landlord may, at Tenant’s sole cost which may be deducted from the Allowance, produce such drawings and CD-ROM(s) using Landlord’s personnel, managers, and outside consultants and contractors. Landlord shall receive an hourly rate reasonable for such production.

  • Model shall refer to a particular brand of Vehicle sold by an OEM (e.g., Taurus, Tahoe, Grand Caravan).

  • Park model trailer means that term as defined in section 38a of the Michigan vehicle code, 1949 PA 300, MCL 257.38a.

  • Combustion turbine means an enclosed fossil or other fuel-fired device that is comprised of a compressor, a combustor, and a turbine, and in which the flue gas resulting from the combustion of fuel in the combustor passes through the turbine, rotating the turbine.

  • Built-Up Area and/or “Covered Area” in relation to a Flat shall mean the floor area of that Flat including the area of balconies and terraces, if any attached thereto, and also the thickness of the walls (external or internal) and the columns and pillars therein Provided That if any wall, column or pillar be common between two Flats, then one-half of the area under such wall column or pillar shall be included in the built-up area of each such Flat.