Air Pollution Control Device definition

Air Pollution Control Device means any device that removes or destroys air contaminants prior to discharge to the ambient air and is not otherwise necessary for the proper functioning or operation of an emission unit or process. Air pollution control devices include, but are not limited to, electrostatic precipitators, filters, spray towers and scrubbers, thermal and catalytic oxidizers, flares, adsorbers, absorbers, steam or water injection, catalytic and noncatalytic reduction, chemical neutralization, and ozonation. For purposes of this rule, devices that are not air pollution control devices include, but are not limited to, modified furnace or burner designs; staged combustion; reduced combustion preheat; low excess air firing; low nitrogen or sulfur content fuel; air injection; ignition timing retardation; control of oxygen concentration in combustion air; process changes; lids, covers, or other solid enclosures; recovery of process gas; dust suppression by physical stabilization, traffic control, water spray, chemical stabilizers, or wetting agents; baffles; conservation vents; submerged or bottom filling; tank conversion to variable vapor space tank, floating roof tank, or pressurized tank or secondary seals for external floating roof tanks; underground tanks; white paint; low volatile organic compound (VOC), low hazardous air pollutant (HAP), powder, and waterborne coatings; low VOC or low HAP surface preparation or cleaning materials; and high transfer efficiency coating application methods.
Air Pollution Control Device means a catalytic oxidizer, acid-water scrubber, or any other air pollution control equipment that reduces the quantity of ethylene oxide in the effluent gas stream from sterilization and aeration processes.
Air Pollution Control Device means a device that removes contaminants from air and includes electrostatic precipitators, scrubbers, baghouses, and cyclones;

Examples of Air Pollution Control Device in a sentence

  • Control DevicesFor each control device listed in the Title V Equipment Table, fill out and provide an Air Pollution Control Device Form as ATTACHMENT G.For any control device that is required on an emission unit in order to meet a standard or limitation for which the potential pre-control device emissions of an applicable regulated air pollutant is greater than or equal to the Title V Major Source Threshold Level, refer to the Compliance Assurance Monitoring (CAM) Form(s) for CAM applicability.

  • Air Pollution Control Device: It is not possible to comply with the emission limit of 150 mg/Nm3 (corrected to 12% CO2) for Particulate Matter, without Air Pollution Control Device (APCD).

  • The industry shall interlock its Air Pollution Control Device (APCD) with furnace to ensure its regular operations.

  • However, the existing incinerator shall be retrofitted with Air Pollution Control Device as mentioned in these guidelines.2. Incinerator shall be allowed only at Common Bio-medical Waste Treatment Facility (CBWTF).3.

  • Planer mill particulate emissions are controlled by a cyclone (Air Pollution Control Device Source Code C02).

  • Wood waste (saw dust, chips and trim ends) is hogged in a Hammer Mill (Source Code H01) controlled by cyclone (Air Pollution Control Device Source Code C01) or Wood Hog (Source Code H02) controlled by a cyclone (Air Pollution Control Device Source Code C03).

  • Check all applicable Air Pollution Control Device Sheets listed below:Absorption Systems Baghouse FlareAdsorption Systems Condenser Mechanical CollectorAfterburner Electrostatic Precipitator Wet Collecting SystemOther Collectors, specify Fill out and provide the Air Pollution Control Device Sheet(s) as Attachment M.30.

  • Air Pollution Control Device Operational Parameter Ranges:The owner or operator shall maintain a list of the proper control device parameter ranges for each control device at the facility.

  • The figures will be saved to the VMTProcFiles directory within the user’s data directory in aPNG format.

  • Attachment H - Air Pollution Control Device Data Sheet If air pollution control devices are utilized (baghouse), complete and attach to the Class II General Permit Registration Application the applicable Air Pollution Control Device Sheet for each unit.


More Definitions of Air Pollution Control Device

Air Pollution Control Device or “Ccontrol device” means equipment, other than inherent process equipment that is used to destroy or remove a regulated pollutant prior to discharge to the atmosphere.

Related to Air Pollution Control Device

  • Air pollution control equipment means a mechanism, device, or contrivance used to control or prevent air pollution, that is not, aside from air pollution control laws and administrative regulations, vital to production of the normal product of the source or to its normal operation.

  • Stormwater Pollution Prevention Plan or "SWPPP" means a document that is prepared in accordance with good engineering practices and that identifies potential sources of pollutants that may reasonably be expected to affect the quality of stormwater discharges from the construction site, and otherwise meets the requirements of this Ordinance. In addition the document shall identify and require the implementation of control measures, and shall include, but not be limited to the inclusion of, or the incorporation by reference of, an approved erosion and sediment control plan, an approved stormwater management plan, and a pollution prevention plan.

  • Storm Water Pollution Prevention Plan means a document which describes the on- site program activities to utilize BMPs to eliminate or reduce pollutant discharges to the storm water conveyance system to the maximum extent practicable.

  • Pollution control facilities means water and air pollution control equipment and solid waste disposal facilities or any of them.

  • Pollution control project means any activity or project at an existing electric utility steam generating unit for purposes of reducing emissions from such unit. Such activities or projects are limited to:

  • Air pollution means the presence in the outdoor atmosphere of one or more air contaminants in sufficient quantities, and of such characteristics and duration as is, or is likely to be, injurious to human health, plant or animal life, or property, or which unreasonably interferes with enjoyment of life and property. For the purposes of this chapter, air pollution shall not include air contaminants emitted in compliance with chapter 17.21 RCW, the Washington Pesticide Application Act, which regulates the application and control of the use of various pesticides.

  • Pollution prevention means any activity that through process changes, product reformulation or redesign, or substitution of less polluting raw materials, eliminates or reduces the release of air pollutants (including fugitive emissions) and other pollutants to the environment prior to recycling, treatment, or disposal; it does not mean recycling (other than certain “in-process recycling” practices), energy recovery, treatment, or disposal.

  • National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.

  • National Pollutant Discharge Elimination System (NPDES) means the national program for issuing, modifying, revoking and reissuing, terminating, monitoring, and enforcing permits and imposing and enforcing pretreatment requirements, under Sections 307, 318, 402, and 405 of CWA. The term includes an approved program.

  • Solid waste management facility means the same as that term is defined in Section 19-6-502.

  • Safety Management System means a systematic approach to managing safety, including the necessary organizational structures, accountabilities, policies and procedures;

  • National Pollutant Discharge Elimination System means the national program for issuing, modifying, revoking and reissuing, terminating, monitoring and enforcing permits, and imposing and enforcing pretreatment requirements under Sections 307, 402, 318, and 405 of the Clean Water Act.

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • International air transportation means transportation by air between a place in the United States and a place outside the United States or between two places both of which are outside the United States.

  • Solid Waste Disposal Site means, as defined in NCGS 130A-290(a)(36), any place at which solid wastes are disposed of by incineration, sanitary landfill, or any other method.

  • Biological safety cabinet means a containment unit suitable for the preparation of low to moderate risk agents where there is a need for protection of the product, personnel, and environment, according to National Sanitation Foundation (NSF) Standard 49.

  • Waste prevention means source reduction and reuse, but not recycling.

  • National Pollutant Discharge Elimination System Permit or “NPDES” means a permit issued by the MPCA as required by federal law for the purpose of regulating the discharge of pollutants from point sources into waters of the United States from concentrated animal feeding operations (CAFOs) as defined by federal law

  • Traffic control signal means a device, whether manually, electrically, or mechanically operated, by which traffic is alternately directed to stop and permitted to proceed.

  • Emission control system means the electronic engine management controller and any emission related component in the exhaust or evaporative system which supplies an input to or receives an output from this controller.

  • Environmental pollution means the contaminating or rendering unclean or impure the air, land or waters of the state, or making the same injurious to public health, harmful for commer- cial or recreational use, or deleterious to fish, bird, animal or plant life.

  • Waste Disposal Site means a Waste Disposal Site which is not a Hauled Sewage Disposal Site, a Sewage Works or a Waste Stabilization Pond; and

  • Health and Safety Plan means a documented plan which addresses hazards identified and includes safe work procedures to mitigate, reduce or control the hazards identified;

  • Solid waste management means the purposeful and systematic collection, transportation, storage, processing, recovery, or disposal of solid waste.

  • Air transportation means the public carriage by aircraft of passengers, baggage, cargo, and mail, separately or in combination, for remuneration or hire;

  • Emission Control Strategy means any device, system, or strategy employed with a diesel-fueled CI engine that is intended to reduce emissions. Examples of emission control strategies include, but are not limited to, particulate filters, diesel oxidation catalysts, selective catalytic reduction systems, alternative fuels, fuel additives used in combination with particulate filters, alternative diesel fuels, and combinations of the above.