Aerospace coating definition

Aerospace coating means a coating to be applied to the fabricated part, assembly of parts, or completed unit of any aircraft, helicopter, missile, or space vehicle, including prototypes and test models.
Sample 1Sample 2Sample 3
Aerospace coating means a material that is applied to the surface of an aerospace vehicle or component to form a decorative, protective, or functional solid film, or the solid film itself.
Sample 1Sample 2

Examples of Aerospace coating in a sentence

  • The fair market value of fuel, the cost of which is reimbursed by or charged to an employer, is generally the amount of the actual reimbursement or the amount charged, provided the purchase of the fuel is at arm’s-length.(D) Fleet-average cents-per-mile fuel cost.

  • Aerospace coating that the United States Department of Defense has designated as classified information in accordance with 32 CFR 2001.

  • Aerospace coating operation—An operation using a spray booth, tank or other enclosure of an area, such as a hangar for applying a single type of coating—for example, primer.

  • Aerospace coating unit—A series of one or more coating applicators and any associated drying area or oven wherein a coating is applied, dried and cured.

  • Aerospace coating stack-ups often contribute significantly to a facility’s overall emissions, which are subject to state, local and site restrictions on total VOC emissions.

  • These particular UV cure coatings were one component (1K) which is the traditional concept for a UV cure Aerospace coating.

  • The following terms, when used in this division, shall have the following meanings, unless the context clearly indicates otherwise.(1) Aerospace coating.

  • None of them is beneficial since they cause difficulties in maintaining the safety of operations.

  • With all of the resources that the US government has implemented over the last two decades for the development of a 1K UV Cure Aerospace coating the future definitely has a great foundation.

Related to Aerospace coating

  • Flat coating means a coating that is not defined under any other definition in this section and that registers gloss less than 15 on an 85-degree meter or less than 5 on a 60-degree meter.

  • Antenna coating means a coating labeled and formulated exclusively for application to equipment and associated structural appurtenances that are used to receive or transmit electromagnetic signals.

  • Metallic coating means a coating which contains more than five grams of metal particles per liter of coating, as applied. Metal particles are pieces of a pure elemental metal or a combination of elemental metals.

  • Specialty coating means any coating that is manufactured and used for one (1) of the following specialized applications:

  • Coating means a material applied onto or impregnated into a substrate for protective, decorative, or functional purposes. Such materials include, but are not limited to, paints, varnishes, sealers, and stains.

  • Touch-up coating means a coating used to cover minor coating imperfections appearing after the main coating operation.

  • Floor coating means an opaque coating that is labeled and designed for application to flooring, including but not limited to, decks, porches, steps, and other horizontal surfaces which may be subject to foot traffic.

  • Flow coating means a coating labeled and formulated exclusively for use by electric power companies or their subcontractors to maintain the protective coating systems present on utility transformer units.

  • Roll coating means the application of a coating material to a substrate by means of hard rubber or steel rolls.

  • Topcoat means a coating that is applied over a primer on an aerospace vehicle or component for appearance, identification, camouflage, or protection. Topcoats that are defined as specialty coatings are not included under this definition.

  • Tire means a continuous solid or pneumatic rubber covering encircling the wheel of a tractor or other farm machinery or of a vehicle.

  • Nuclear coating means any protective coating used to seal porous surfaces, such as steel or concrete, that otherwise would be subject to intrusion by radioactive materials. These coatings must be resistant to long term (service life) cumulative radiation exposure (ASTM D4082-83**), relatively easy to decontaminate (ASTM D4256-83**), and resistant to various chemicals to which the coatings are likely to be exposed (ASTM 3912-80**). General protective requirements are outlined by the Department of Energy (formerly United States Atomic Energy Commission Regulatory Guide 1.54**).

  • Automotive windshield washer fluid means any liquid designed for use in a motor vehicle windshield washer system either as an antifreeze or for the purpose of cleaning, washing, or wetting the windshield. Automotive windshield washer fluid does not include fluids placed by the manufacturer in a new vehicle.

  • Faux finishing coating means a coating labeled and formulated as a stain or a glaze to create artistic effects including, but not limited to, dirt, old age, smoke damage, and simulated marble and wood grain.

  • Furniture coating means any paint designed for application to room furnishings including, but not limited to, cabinets (kitchen, bath and vanity), tables, chairs, beds, and sofas.

  • Caliper means and refer to a standard trunk diameter measurement for trees. Caliper measurements are taken twelve inches above the finished grade.

  • Industrial maintenance coating means a high performance architectural coating, including primers, sealers, undercoaters, intermediate coats, and topcoats formulated for application to substrates, including floors, exposed to one or more of the following extreme environmental conditions listed below and labeled “For industrial use only;” “For professional use only;” “Not for residential use;” or “Not intended for residential use.”

  • Clear coating means a transparent coating designed to provide the final gloss and resistance properties of the coating system;

  • Basecoat means a coat of colored material, usually opaque, that is applied before graining inks, glazing coats, or other opaque finishing materials and is usually topcoated for protection.

  • Oxides of nitrogen means the sum of the volume mixing ratio (ppbv) of nitrogen monoxide (nitric oxide) and nitrogen dioxide expressed in units of mass concentration of nitrogen dioxide (µg/m3);

  • Pretreatment coating means a coating which contains no more than 12% solids by weight, and at least 0.5% acid by weight, is used to provide surface etching, and is applied directly to metal surfaces to provide corrosion resistance, adhesion, and ease of stripping.

  • Seaplane means an aeroplane capable normally of taking off from and alighting solely on water;

  • Repair coating means a coating used to re-coat portions of a previously coated product which has sustained mechanical damage to the coating following normal coating operations.

  • High-temperature coating means a high performance coating labeled and formulated for application to substrates exposed continuously or intermittently to temperatures above 204oC (400oF).

  • Solutions means Products and Services provided under this “CPE Products & Services; Professional Services” Section.

  • Undercoating means any aerosol product designed to impart a protective, non-paint layer to the undercarriage, trunk interior, and/or firewall of motor vehicles to prevent the formation of rust or to deaden sound. “Undercoating” includes, but is not limited to, rubberized, mastic, or asphaltic products.