Additional test definition

Additional test means a test, including substitute tests approved by the Board of Education that students may use in lieu of a Standards of Learning test to obtain verified credit.
Sample 1Sample 2Sample 3
Additional test means a test, including substitute tests approved by the Board of
Sample 1Sample 2Sample 3

Examples of Additional test in a sentence

  • Additional test sections, as required, shall be constructed and evaluated for conformance to the specifications.

  • Additional test series of substantiation from previous projects, not to exceed two per source, will be required if source of prestressing steel changes during project.

  • Additional test weights or other known test loads may be added to the known test load to evaluate higher weight ranges on the scale.(Added 2003) N.1.12.

  • Additional test regulations may also be specified that arise from the specific nature of a digital examination.

  • Additional test borings and other exploratory operations may be made by Contractor at no cost to Owner.

  • Additional test species may be used by the Copermittees if approved by the San Diego Water Board Executive Officer.

  • Additional test case introduced: for a UE significantly reducing (by at least [6] dB) the SCell power or dropping the SCells at maximum output power, the requirements for the total output power shall be in accordance with that for a single carrier for DFT-s-BPSK or DFT-s-QPSK.

  • Additional test steps as described in section 3.9.1(c) of this appendix are required if the measured external static pressure exceeds the target value by more than 0.03 inches of water.

  • Additional test steps as described in section 3.3(e) of this appendix are required if the measured external static pressure exceeds the target value by more than 0.03 inches of water.

  • Additional test data, if requested, must be provided within 30 days of the request or the manufacturer must rescind the addition or change immediately.

Related to Additional test

  • Additional Term shall have the meaning set forth in Section 8.2.

  • PRINCIPAL TEST The CONTRACTOR rather than COUNTY has the right to control the manner and means of accomplishing the result contracted for.

  • EPP test Means one EPP command sent to a particular “IP address” for one of the EPP servers. Query and transform commands, with the exception of “create”, shall be about existing objects in the Registry System. The response shall include appropriate data from the Registry System. The possible results to an EPP test are: a number in milliseconds corresponding to the “EPP command RTT” or undefined/unanswered.

  • Acceptance Test is a test of the Features executed by the Customer to prepare the acceptance.

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.

  • Operational Acceptance Tests means the tests specified in the Technical Requirements and Agreed Project Plan to be carried out to ascertain whether the System, or a specified Sub system, is able to attain the functional and performance requirements specified in the Technical Requirements and Agreed Project Plan, in accordance with the provisions of GCC Clause 27.2 (Operational Acceptance Test).

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • ASAM criteria means the most current edition of the American Society of Addiction Medicine's published criteria for admission to treatment, continued services, and discharge.

  • DNS test Means one non-­‐recursive DNS query sent to a particular “IP address” (via UDP or TCP). If DNSSEC is offered in the queried DNS zone, for a query to be considered answered, the signatures must be positively verified against a corresponding DS record published in the parent zone or, if the parent is not signed, against a statically configured Trust Anchor. The answer to the query must contain the corresponding information from the Registry System, otherwise the query will be considered unanswered. A query with a “DNS resolution RTT” 5 times higher than the corresponding SLR, will be considered unanswered. The possible results to a DNS test are: a number in milliseconds corresponding to the “DNS resolution RTT” or, undefined/unanswered.

  • Covenant Testing Period means a period (a) commencing on the last day of the fiscal quarter of Borrower most recently ended prior to a Covenant Trigger Event for which Borrower is required to deliver to Administrative Agent quarterly or annual financial statements pursuant to Section 5.2 of this Agreement, and (b) continuing through and including the first day after such Covenant Trigger Event that Availability has equaled or exceeded the greater of (i) 10% of the Borrowing Limit, and (ii) $15,000,000 for 60 consecutive calendar days.

  • Additional Term Loan has the meaning specified in Section 2.01(c).

  • Acceptance Tests means those tests performed during the Performance Period which are intended to determine compliance of Equipment and Software with the specifications and all other Attachments incorporated herein by reference and to determine the reliability of the Equipment.

  • Debt service extension base means an amount equal to that

  • Start-Up Testing means the completion of applicable required factory and start-up tests as set forth in Exhibit C.

  • Acceptance Criteria means the Specifications, goals, performance measures, testing results and/or other criteria designated by the Agency and against which the Deliverables may be evaluated for purposes of Acceptance or Non-acceptance thereof.

  • Over-Riding Nomination Criteria means the criteria set out in clause 4.2.

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.

  • Grace Period Extension Date means, if:

  • Drug test means a test designed to detect the illegal use of a controlled substance.

  • Fit test means the use of a protocol to qualitatively or quantitatively evaluate the fit of a respirator on an individual.

  • Initial compliance period means the first full three-year compliance period which begins at least 18 months after promulgation, except for the following contaminants: Dichloromethane; 1,2,4-Trichlorobenzene; 1,1,2- Trichloroethane; Benzo[a]pyrene; Dalapon; Di(2-ethylhexyl adipate; Di(2-ethylhexyl) phthalate; Dinoseb; Diquat; Endothall; Endrin; Glyphosate; Hexachlorobenzene; Hexachlorocyclopentadiene; Oxamyl (Vydate); Picloram; Simazine; 2,3,7,8-TCDD (Dioxin); Antimony; Beryllium; Cyanide; Nickel; and Thallium, initial compliance period means the first full three-year compliance period after promulgation for systems with 150 or more service connections (January 1993 -December 1995) and first full three-year compliance period after the effective date of regulation (January 1996 - December 1998) for systems having fewer than 150 service connections.

  • Nomination Criteria means the criteria made up of the Over-Riding Nomination Criteria andthe Specific Nomination Factors, and is also referred to as “this Criteria”.

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.

  • Additional Terms means any additional terms agreed in writing amending, varying or agreeing additions to these Terms;

  • Design Criteria Package means concise, performance-oriented drawings or specifications for a public construction project. The purpose of the Design Criteria Package is to furnish sufficient information to permit Design-Build Firms to prepare a bid or a response to the District’s Request for Proposals, or to permit the District to enter into a negotiated Design- Build Contract. The Design Criteria Package must specify performance- based criteria for the public construction project, including the legal description of the site, survey information concerning the site, interior space requirements, material quality standards, schematic layouts and conceptual design criteria of the project, cost or budget estimates, design and construction schedules, site development requirements, provisions for utilities, stormwater retention and disposal, and parking requirements applicable to the project. Design Criteria Packages shall require firms to submit information regarding the qualifications, availability, and past work of the firms, including the partners and members thereof.