Acrylic definition

Acrylic means a chemical coating containing polymers or co-polymers of acrylic or substitute acrylic acid in combination with resinous modifiers. The primary mode of cure is solvent evaporation.

Examples of Acrylic in a sentence

  • Stimsonite, Model 967 (with 83 mm Acrylic cube corner reflector)C.

  • Lime for lime wash, dry distemper, oil bound distemper cement primer, oil paint, enamel paint, flat oil paint, plastic emulsion paint, anti-corrosive primer, red lead, water-proof cement paint and exterior grade Acrylic Emulsion paint, cement paint, sand-tex matt shall be from an approved manufacturer and shall conform to the latest Indian Standard for various paints.

  • Flat Acrylic Finish: Two finish coats over a primer that is compatible with jacket material and finish coat paint.

  • Latex Joint Sealant: Acrylic latex or siliconized acrylic latex, ASTM C 834, Type OP, Grade NF.

  • Engraved, Laminated Acrylic or Melamine Label: Punched or drilled for screw mounting.

  • Road Creations, Model RCB4NR (Acrylic) PAVEMENT MARKERS, TEMPORARY TYPETemporary Markers For Long Term Day/Night Use (6 months or less)A.

  • Self-Adhesive, Engraved, Laminated Acrylic or Melamine Label: Adhesive backed, with white letters on a dark-gray background.

  • Industries relating to production of non-cellulosic synthetic fibres (Nylon Polyester, Acrylic etc.).

  • Acrylic latex and Silicon sealants shall have less than 50g/l VOC content.

  • The following light sources are not permitted: • Acrylic sheet or shallow cell lenses; • High or low pressure sodium; • Mercury vapor; and • Cool white fluorescent.

Related to Acrylic

  • Polystyrene foam means blown polystyrene and expanded and

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • HDPE means high density polyethylene;

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • Plastic means material which contains as an essential ingredient a high polymer, such as polyethylene terephthalate, high density polyethylene, Vinyl, low density polyethylene, polypropylene, polystyrene resins, multi-materials like acrylonitrile butadiene styrene, polyphenylene oxide, polycarbonate, polybutylene terephthalate ;

  • Expanded polystyrene means blown polystyrene and expanded

  • Encapsulation means the application of an encapsulant.

  • Radionuclide means a radioactive element or a radioactive isotope.

  • Electrostatic spray means a method of applying a spray coating in which opposite electric charges are applied to the substrate and the coating. The coating is attracted to the substrate by the electrostatic potential between them.

  • Wax means a material or synthetic thermoplastic substance generally of high molecular weight hydrocarbons or high molecular weight esters of fatty acids or alcohols, except glycerol and high polymers (plastics). “Wax” includes, but is not limited to, substances derived from the secretions of plants and animals such as carnuba wax and beeswax, substances of a mineral origin such as ozocerite and paraffin, and synthetic polymers such as polyethylene.

  • Dielectric material means a material that does not conduct direct electrical current. Dielectric coatings are used to electrically isolate UST systems from the surrounding soils. Dielectric bushings are used to electrically isolate portions of the UST system (e.g., tank from piping).

  • explosive actuated fastening device means a tool that is activated by an explosive charge and that is used for driving bolts, nails and similar objects for the purpose of providing fixing;

  • Solids means the nonvolatile portion of the coating that after drying makes up the dry film.

  • LDPE means low density polyethylene, labeled by the SPI code #4.

  • Propeller means for a device for propelling an aircraft that has blades on a powerplant driven shaft and that, when rotated, produces by its action on the air, a thrust approximately perpendicular to its plane of rotation and it includes control components normally supplied by its manufacturer, but does not include main and auxiliary rotors or rotating airfoils of powerplants;

  • Isomer means all enantiomers and diastereomers.

  • Biodegradable means degradable through a process by which fungi or bacteria secrete enzymes to convert a complex molecular structure to simple gasses and organic compounds.

  • Pyrolysis means the thermal degradation of a substance in the absence of any oxidising agent, which does not form part of the substance itself, to produce char and gas and/or liquid; and

  • Hydraulic lift tank means a tank holding hydraulic fluid for a closed-loop mechanical system that uses compressed air or hydraulic fluid to operate lifts, elevators, and other similar devices.

  • Diameter means the diameter of the stem of a tree measured outside the bark at a specified point of measurement.

  • Drum means any cylindrical metal shipping container of 13 to 110 gallon capacity.

  • Hydrofluorocarbons means compounds that only contain hydrogen, fluorine, and carbon.

  • Diesel means a distillate oil which can be used as fuel for the operation of a compression ignition engine and which has an approximate boiling temperature of between 150 °C to 400 °C;

  • Tablet means a solid preparation containing a single serving of THC or other cannabinoid that is intended to be swallowed whole, and that is not formulated to be chewable, dispersible, effervescent, orally disintegrating, used as a suspension, or consumed in a manner other than swallowed whole, and that does not contain any added natural or artificial flavor or sweetener.

  • Automotive windshield washer fluid means any liquid designed for use in a motor vehicle windshield washer system either as an antifreeze or for the purpose of cleaning, washing, or wetting the windshield. Automotive windshield washer fluid does not include fluids placed by the manufacturer in a new vehicle.