Abrasives definition

Abrasives means any material used in abrasive blasting operations.
Sample 1Sample 2Sample 3
Abrasives means any material used in abrasive blasting operations including but not limited to sand, slag, steel shot, garnet or walnut shells.
Sample 1Sample 2Sample 3
Abrasives means paper that is coated with resin mixture and sand, that is subsequently shipped from the facility.
Sample 1

Examples of Abrasives in a sentence

  • Abrasives are articles and not dangerous substances or mixtures and therefore no labelling is required according to Regulation (EC) N° 1272/2008.

  • Abrasives to be used for abrasive blast cleaning, including MSDS.

  • Abrasives are articles and not dangerous substances or mixtures and therefore no labelling is required according to directive 1999/45/EC or Regulation (EC) N° 1272/2008.

  • The mop is then rinsed in the second bucket and dipped in the third bucket which can also contain a disinfectant and the mopping done again.(vi) Abrasives should be used as a last resort as they can damage the surface.

  • Chemicals, Plastics and Rubber: Chemicals (non-agricultural), Industrial Gases, Sulphur, Plastics, Plastic Products, Abrasives, Coatings, Paints, Varnish, Fabricating Containers.

  • Abrasives used for blasting must be dry and free from dirt, oil, and grease and suitable for producing the standard of cleanliness and profile specified.

  • It is not allowed to use anything listed in the "Products Containing Solids or Abrasives" section nor anything listed in the "Not acceptable at any time" sections.

  • The mop is then rinsed in the second bucket and dipped in the third bucket which can also contain a disinfectant and the mopping done again.(vi) Abrasives should be used as a last resort as they can damage the surface.(vii) Use an agent that is least offensive in smell if alternatives are available.

  • Stability and Reactivity StabilityBonded Abrasives are stable when handled or stored Reactivity10.1 Conditions to avoid:No decomposition in normal storage.

  • Abrasives for submerged and severe service coating systems shall be clean, hard, sharp cutting crushed slag.


More Definitions of Abrasives

Abrasives means crushed gravel mixed with fines (material sized to 12 mm minus based on screen size) mixed with a chemical de-icing agent at a ratio 20 parts abrasives to 1 part chemical.
Sample 1
Abrasives means crushed gravel mixed with fines mixed with a de-icing agent.
Sample 1

Related to Abrasives

  • Topsoil means a varying depth (up to 300 mm) of the soil profile irrespective of the fertility, appearance, structure, agricultural potential, fertility and composition of the soil;

  • Slug means any discharge of water, sewage, or industrial waste which in concentration of any given constituent or in quantity of flow exceeds for any period of duration longer than fifteen (15) minutes more than five (5) times the average twenty-four (24) hour concentration or flows during normal operation.

  • Pyrolysis means the thermal degradation of a substance in the absence of any oxidising agent, which does not form part of the substance itself, to produce char and gas and/or liquid; and

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Grinding means to reduce to powder or small fragments and includes mechanical chipping or drilling.

  • Encapsulant means a substance that forms a barrier between lead-based paint and the environment using a liquid-applied coating (with or without reinforcement materials) or an adhesively bonded covering material.

  • explosive actuated fastening device means a tool that is activated by an explosive charge and that is used for driving bolts, nails and similar objects for the purpose of providing fixing;

  • Bottle means any vessel intended to contain liquids and having a capacity of not more than 43

  • Disinfectant means any oxidant, including but not limited to chlorine, chlorine dioxide, chloramines, and ozone added to water in any part of the treatment or distribution process, that is intended to kill or inactivate pathogenic microorganisms.

  • Encapsulation means the application of an encapsulant.

  • Additives means non-hydrocarbon compounds added to or blended with a product to modify its properties;

  • Oven means a chamber which is used to bake, cure, polymerize, and/or dry a

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • HDPE means high density polyethylene;

  • Kerosene means all grades of kerosene, including, but not limited to, the 2 grades of kerosene, No. 1-K and No. 2-K, commonly known as K-1 kerosene and K-2 kerosene respectively, described in American society for testing and materials specifications D-3699, in effect on January 1, 1999, and kerosene-type jet fuel described in American society for testing and materials specification D-1655 and military specifications MIL-T-5624r and MIL-T-83133d (grades jp-5 and jp-8), and any successor internal revenue service rules or regulations, as the specification for kerosene and kerosene-type jet fuel. Kerosene does not include an excluded liquid.

  • Polystyrene foam means blown polystyrene and expanded and

  • Hydrofluorocarbons means compounds that only contain hydrogen, fluorine, and carbon.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Infiltration means water other than wastewater that enters a sewer system (including sewer system and foundation drains) from the ground through such means as defective pipes, pipe joints, connections, or manholes. Infiltration does not include, and is distinguished from, inflow.

  • Electrostatic spray means a method of applying a spray coating in which opposite electric charges are applied to the substrate and the coating. The coating is attracted to the substrate by the electrostatic potential between them.

  • Sludge means any solid, semi-solid, or liquid waste generated from a municipal, commercial, or industrial wastewater treatment plant, water supply treatment plant, or air pollution control facility exclusive of the treated effluent from a wastewater treatment plant.

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • Fabrication means making up data or results and recording or reporting them.

  • Corrosion inhibitor means a substance capable of reducing the corrosivity of water toward metal plumbing materials, especially lead and copper, by forming a protective film on the interior surface of those materials.

  • Disinfection means a process which inactivates pathogenic organisms in water by chemical oxidants or equivalent agents.

  • Grease means an organic substance recoverable by procedures set forth in "Standard Methods" and includes but is not limited to hydrocarbons, esters, fats, oils, waxes and high molecular carboxylic acids;