Exhibit 10.2
PURCHASE AGREEMENT
This Purchase Agreement ("Agreement") is made and entered into effective as
of the 10th day of May, 2002, by and between MTD PRODUCTS INC, an Ohio
corporation ("Buyer") and SHILOH AUTOMOTIVE, INC., an Ohio corporation
("Seller").
WHEREAS, Seller is engaged in the business of manufacturing and selling
certain automotive and outdoor power equipment parts to certain OEM's and
suppliers to the OEM's (the "Business"); and
WHEREAS, Seller desires to sell to Buyer and Buyer desires to acquire from
Seller certain assets of the Business as hereinafter specifically identified, on
the terms and conditions set forth herein.
NOW, THEREFORE, in consideration of the foregoing and other good and
valuable consideration, the receipt and sufficiency of which is hereby
acknowledged, and intending to be legally bound, the parties hereby agree as
follows:
1. Purchased Assets. Seller hereby agrees to grant, bargain, sell,
convey, transfer and assign all of its right, title and interest it may have in
the following assets: the two (2) lawnmower blade lines and related equipment
set forth on Schedule One attached hereto ("Blade Lines") (the identified Blade
Lines are sometimes herein also referred to as the "Purchased Assets"). Upon
transfer of the Blade Lines hereunder, Seller will execute and deliver to Buyer
the Xxxx of Sale in the form attached hereto as Exhibit "A".
2. Purchase Price. The purchase price shall be Two Million Dollars
($2,000,000). Such amount shall be paid by Buyer to Seller via wire transfer at
the time of Closing.
3. Condition of Purchased Assets. Seller represents and warrants that the
Purchased Assets are in good operating and physical condition, ordinary wear and
tear, excepted, and have been maintained in all material respects in compliance
with applicable manufacturers' operating guidelines.
4. Title. Seller is the sole owner of the Purchased Assets. Except for
the lien of JPMorgan Chase Bank, as Agent for Seller's secured lenders
("JPMorgan"), Seller has good and marketable title to the Purchased Assets free
and clear of any and all liens and encumbrances. At Closing, Seller will provide
to Buyer duly executed Uniform Commercial Code Form 3's reflecting
amendments/partial releases of JPMorgan, as Agent, with regard to the Purchased
Assets.
5. Location of Purchased Assets. The Blade Lines are currently located at
Seller's manufacturing facility located at 0000 Xxxx 000xx Xxxxxx, Xxxxxxxxx,
Xxxx (the "Facility"). The Purchased Assets shall remain in the Facility as
further set forth in the Manufacturing Supply Agreement executed simultaneously
herewith.
6. UCC Filings. Seller will acknowledge the transfer of title of the
Purchased Assets from Seller to Buyer and will execute appropriate UCC Financing
Statements to record the ownership of the Purchased Assets in the Buyer,
including such UCC Financing Statements in the form attached hereto as Exhibit
"B". This Agreement shall constitute a Security Agreement for purposes of the
UCC.
7. Closing. The Closing will occur on or about May 10, 2002.
8. No Assumed Liabilities. Buyer will not assume any liabilities with
regard to any purchase orders which Seller may have in place which utilize the
Purchased Assets.
9. Prior Agreements Superseded. This Agreement and the Manufacturing
Supply Agreement constitutes the sole and only agreement of the parties with
regard to the subject matter herein and supersedes any prior understanding or
written or oral agreements between the parties respecting such subject matter.
10. Parties Bound. Neither party may assign this Agreement without the
consent of the other party. This Agreement shall be binding on and inure to the
benefit of the parties and their respective successors, and assigns when
permitted by this contract.
11. Governing Law. The Agreement shall be construed under the laws of the
State of Ohio.
IN WITNESS WHEREOF, the parties have executed this Agreement effective as
of the date set forth above.
Seller
SHILOH AUTOMOTIVE
By: /s/ Xxxxxx X. Xxxxxx
-------------------------------------
Title: CHIEF FINANCIAL OFFICER
-------------------------------------
Buyer
MTD PRODUCTS INC
By: /s/ Xxxxxx X. Xxxxxx
-------------------------------------
Title: EXECUTIVE VICE PRESIDENT AND
-------------------------------------
CHIEF FINANCIAL OFFICER
-------------------------------------
-2-
GUARANTEE OF SHILOH INDUSTRIES, INC.
As the sole shareholder of Shiloh Automotive, Inc., Shiloh Industries, Inc.
acknowledges the receipt of benefits pursuant to the Agreement and guarantees
the obligations of Shiloh Automotive, Inc. as set forth in this Agreement.
SHILOH INDUSTRIES, INC.
By: /s/ Xxxxxx X. Xxxxxx
-------------------------------------
Title: CHIEF FINANCIAL OFFICER
-------------------------------------
-3-
SCHEDULE ONE
---------- ------- -------------------------------------------------------------
Item # Qty. Description
---------- ------- -------------------------------------------------------------
1552 Lot- Blade Line No. 1 (New 1997), Consisting of:
. Xxxxxxxx & White 600 Ton Gib Guided Straight Side
Hydraulic Press, S/N C-4733 (New 1997), 600 ton, 72"
x 60" Bed Area, 16" Stroke, 36" Daylight, 1200" IPM,
Advance 20 to 240 IPM Pressing an1200 IPM Return, 300
HP, 8-Point Gibbing Flush Floor Design, Trabon Lube
System, Complete with Atlas Technology AC Servo Part
Transfer and Conveyor System, with PLC Controls,
Hydraulic Die and Conveyor System, with PLC Controls,
Hydraulic Die Clamping Top and Bottom Platens and
Perfecto Press Mounted Servo Feed
. (2) Setco 3-Axis Vertical Milling Stations,
Permanently Inclined, with Magnetic Scrap Conveyors
and Xxxxxx Hammer Panelmate PLC Controls, Mounted
on Common Base
. Perfecto Cabinet Mounted Servo Feeder, S/N 97160,
with Separate Control.
. Perfecto Model S280411 Stock Straightener,
S/N97158, 7-Roll Straightener with (2) Sets
Hydraulic Pinch Rolls, Drop Away Threading Table,
Hydraulic Stock Xxxxxx, Hydraulic Drive, Panelmate
PLC Controller
. Perfecto Model RDO472-12 Xxxxxx Xxx Xxxxx Xxxxxx
Xxxx Xxxx, X/X 00000, 4,000 LB x 12" Capacity, 72"
OD, 20" to 24" ID, Swivel Base and Hydraulic Hold
Down
. Upton Industries Model DG2574 7A-Auto Power
6-Station Heat Treating Line, Station 1 Preheat,
Station 2 High Heat, Station 3 Quench, Station 4
Hot Oil, Station 5 Hot Wash, Station 6 Oil Dip, Gas
Heated, Carousel Load and Unload Stations,
Honeywell Controllers, Eaton Panelmate PLC
Controllers
. (2) Custom Designed and Fabricated Blade
Straightening and Balance Stations, Automatic
Hydraulic Operated Down Acting Ram, with Auto
Conveyor Loader and Unloader, Xxxxxx Hammer
Panelmate PLC Control, Custom Designed and
Fabricated for Blade Production
--------------------------------------------------------------------------------
SCHEDULE ONE-(continued)
---------- ------- -------------------------------------------------------------
Item # Qty. Description
---------- ------- -------------------------------------------------------------
1555 Lot- Blade Line No. 2, Consisting of:
. USI Clearing 250 Ton Open Back Inclinable Press,
S/N 54- 1472, 250 Ton, 12" Throat, 26" Shut Height,
6" Adjustment, 30 SPM, 50" x 30" Bed Area,
Cushions, T-Slotted Ram, Air Clutch, Air
Counterbalance
. Niagra Model SE2-200-60-36 2-Point Straight Side
Press, S/N42231, 200 ton, 60" x 36" Bed Area, 12"
Stroke, 38" Shut Height, 12" Adjustment, 30 SPM, No
Windows, Flush Floor, T-Slotted Ram, Air Clutch
. (2) Setco Model SHL15FRY 3-Axis Permanently
Inclined Vertical Milling Machine, S/N 16415, both
Mounted on Common Base
. Littel Servo Feeder, S/N 90086-90, with Unico
Control Console
. Littel Model 408E-7PD Coil Stock Straightener, S/N
90087-90, 7-Roll Straightener with (2) Sets
Hydraulic Pinch Rolls, 8" x 200" Capacity, Variable
Speed, Threading Table, Trabon Lube System
. Littel Model 40-12 Double End Coil Reel, S/N
90088-90, 4,000 LB x 12" Capacity, Plain Type, 72"
OD, Air Brake, Swivel Head, Manual Expansion,
Separate Mounted Pneumatic Hold Down
. Upton Model P-2475-6A 6-Station Heat Treating Line,
with Wash, Hot Rinse, High Heated Quench, Risen and
Oil Cycles, Honeywell Controllers, Gas Heated,
Carousel Load and Unload
. (3) Independent Blade Straightening and Balancing
Stations, Customer Designed and Fabricated for
Balancing Lawn Mower Blades
. OTHER BLADE LINE ASSETS
. Die Work On Blade Line
. Press #283 200T Rebuild Drive Ass'y
. Panel/Build Wiring-Blade Line
. 2 Salt Bath Furnaces Model #4A-42-30-50-SB-2737
and B-2738 and Install
. Blade Line-Install Furnace
. 1/4 Ton Chain Hoist-Blade Line
. Spindle-Blade Line
. Replace Festoon Trolleys-Crane 136B
. Assemble New Milling Machine on Blade Line
. Repair Gear Box-Blade Line
. Rebuild AC Drive 50A, 460V
. Replace Xxxxx Xxxxxxx AB136 Ser #10351
. Rebuild 3P Unit-Old Heat Treat Line
. Rebuild Clutch Drive-250T Press 54-1470
. Blade Line-Electronic Drive Old Line Coil Feed
. Salt Bath Furnace #B-2747
. 160 KVA Spare Transformer
--------------------------------------------------------------------------------
Applicable Purchase Price: $2,000,000.00
Exhibit "A"
XXXX OF SALE
This Xxxx of Sale ("Xxxx of Sale") dated as of the _____ day of _________,
2002, is made and delivered pursuant and subject to the terms of a Purchase
Agreement ("Agreement") dated [an even date herewith,] by and between MTD
PRODUCTS INC, an Ohio corporation ("MTD") and SHILOH Automotive, Inc., an Ohio
corporation ("Shiloh"). Capitalized terms used in this Xxxx of Sale that are not
defined herein shall have the same meaning ascribed to them in the Agreement.
W I T N E S S E T H:
WHEREAS, MTD and Shiloh are parties to the Agreement, which by this
reference is incorporated into and made a part of this Xxxx of Sale, pursuant to
which Shiloh has agreed to sell, convey, assign, transfer and deliver to MTD the
Purchased Assets as defined in the Purchase Agreement and MTD has agreed to
acquire the same; and
WHEREAS, Shiloh desires to execute and deliver this Xxxx of Sale in
furtherance of the Agreement.
NOW, THEREFORE, for the consideration set forth in the Agreement and other
good and valuable consideration had and received, the receipt and sufficiency of
which are hereby acknowledged, Shiloh does hereby grant, bargain, sell, convey,
transfer and assign unto and vest in MTD, its successors and assigns, all of
Shiloh's right, title and interest in and to the Purchased Assets, as defined in
the Agreement.
TO HAVE AND TO HOLD, all and singular, the Purchased Assets hereby granted,
bargained, sold, conveyed, transferred and assigned to and vested in, as
applicable, MTD, its successors and assigns, to and for its and their use and
benefit forever. Shiloh hereby covenants that it will not execute any instrument
or grant or transfer any rights or interest inconsistent with the rights and
interest granted herein.
Reference is hereby made to the Agreement for a complete description of the
Purchased Assets and a complete statement of all representations and warranties
made by or attributable to Shiloh in respect of the Purchased Assets.
Shiloh further agrees to execute and deliver to MTD such further
instruments of transfer and assignment as MTD may from time to time reasonably
request in order to transfer, assign to and vest in MTD the Purchased Assets.
IN WITNESS WHEREOF, each of MTD and Shiloh have caused this instrument to
be executed by its duly authorized officer on the date first written above.
SHILOH AUTOMOTIVE, INC.
By: ______________________________________
Name: ______________________________________
Title: ______________________________________
MTD PRODUCTS INC
By: ______________________________________
Name: ______________________________________
Title: ______________________________________
GUARANTEE OF SHILOH INDUSTRIES, INC.
As the sole shareholder of Shiloh Automotive, Inc., Shiloh Industries, Inc.
acknowledges the receipt of benefits pursuant to the Agreement and guarantees
the obligations of Shiloh Automotive, Inc. as set forth in this Xxxx of Sale.
SHILOH INDUSTRIES, INC.
By: ______________________________________
Name: ______________________________________
Title: ______________________________________
-2-
Exhibit "B"
UCC FINANCING STATEMENT
FOLLOW INSTRUCTIONS (front and back) CAREFULLY
---------------------------------------------------------------------------
A. NAME & PHONE OF CONTACT AT FILER [optional]
---------------------------------------------------------------------------
B. SEND ACKNOWLEDGMENT TO: (Name and Address)
------------ -----------
Xxxxxx, Xxxxxxx & Xxxxxxxxxx
0000 Xxxxxxxx Xxxxx Xxxxxxxxx, Xxxxx 000
Xxxxxxxxx, Xxxx 00000-0000
Attention: Xxxxxx X. Xxxxxxx, Esq.
------------ -----------
THE ABOVE SPACE IS FOR FILING OFFICE USE ONLY
------------------------------------------------------------------------------------------------------------------------------------
1. DEBTOR'S EXACT FULL LEGAL NAME - insert only one debtor name (1a or 1b) - do not abbreviate or combine names
------------------------------------------------------------------------------------------------------------------------------------
1a. ORGANIZATION'S NAME
OR Shiloh Automotive, Inc.
-------------------------------------------------------------------------------------------------------------------------------
1b. INDIVIDUAL'S LAST NAME FIRST NAME MIDDLE NAME SUFFIX
-------------------------------------------------------------------------------------------------------------------------------
1c. MAILING ADDRESS CITY STATE POSTAL CODE COUNTRY
0000 Xxxx 000xx Xxxxxx Xxxxxxxxx XX 00000 XXX
------------------------------------------------------------------------------------------------------------------------------------
1d. TAX ID #: SSN OR EIN ADD'L INFO RE 1e. TYPE OF ORGANIZATION 1f. JURISDICTION OF ORGANIZATION 1g. ORGANIZATIONAL ID #,
ORGANIZATION if any
00-0000000 XXXXXX Xxxxxxxxxxx Xxxx XX 0000000 [_] none
------------------------------------------------------------------------------------------------------------------------------------
2. ADDITIONAL DEBTOR'S EXACT FULL LEGAL NAME - insert only one debtor name (2a or 2b) - do not abbreviate or combine names
-------------------------------------------------------------------------------------------------------------------------------
2a. ORGANIZATION'S NAME
-------------------------------------------------------------------------------------------------------------------------------
OR 2b. INDIVIDUAL'S LAST NAME FIRST NAME MIDDLE NAME SUFFIX
-------------------------------------------------------------------------------------------------------------------------------
2c. MAILING ADDRESS CITY STATE POSTAL CODE COUNTRY
------------------------------------------------------------------------------------------------------------------------------------
2d. TAX ID #: SSN OR EIN ADD'L INFO RE 2e. TYPE OF ORGANIZATION 2f. JURISDICTION OF ORGANIZATION 2g. ORGANIZATIONAL ID #,
ORGANIZATION if any
DEBTOR [_] none
------------------------------------------------------------------------------------------------------------------------------------
3. SECURED PARTY'S NAME (or NAME of TOTAL ASSIGNEE of ASSIGNOR S/P) - insert only one secured party name (3a or 3b)
--------------------------------------------------------------------------------------------------------------------------------
3a. ORGANIZATION'S NAME
MTD Products Inc
--------------------------------------------------------------------------------------------------------------------------------
OR 3b. INDIVIDUAL'S LAST NAME FIRST NAME MIDDLE NAME SUFFIX
--------------------------------------------------------------------------------------------------------------------------------
3c. MAILING ADDRESS CITY STATE POSTAL CODE COUNTRY
0000 Xxxxxxx Xxxx Xxxxxx Xxxx XX 00000 XXX
------------------------------------------------------------------------------------------------------------------------------------
4. This FINANCING STATEMENT covers the following collateral:
See attached Exhibit A.
------------------------------------------------------------------------------------------------------------------------------------
5. ALTERNATIVE DESIGNATION [if applicable]: [_] LESSEE/LESSOR [_] CONSIGNEE/CONSIGNOR [_] BAILEE/XXXXXX [_] SELLER/BUYER
[_] AG. LIEN [_] NON-UCC FILING
------------------------------------------------------------------------------------------------------------------------------------
6. This FINANCING STATEMENT is to be filed [for record] 7. Check to REQUEST SEARCH REPORT(S) on Debtor(s) [_] All Debtors
[X] (or recorded) in the REAL ESTATE RECORDS. Attach Addendum [_] Debtor 1
[if applicable] [optional] [ADDITIONAL FEE] [_] Debtor 2
------------------------------------------------------------------------------------------------------------------------------------
8. OPTIONAL FILER REFERENCE DATA
------------------------------------------------------------------------------------------------------------------------------------
FILING OFFICE COPY-- NATIONAL UCC FINANCING STATEMENT (FORM UCC1) (REV. 07/29/98)
UCC FINANCING STATEMENT ADDENDUM
-------------------------------------------------------------------------------
FOLLOW INSTRUCTIONS (front and back) CAREFULLY
-------------------------------------------------------------------------------
9. NAME OF FIRST DEBTOR (1a or 1b) ON RELATED FINANCING STATEMENT
------------------------------------------------------------------------
9a. ORGANIZATION'S NAME
OR Shiloh Automotive, Inc.
------------------------------------------------------------------------
9b. INDIVIDUAL'S LAST NAME FIRST NAME MIDDLE NAME, SUFFIX
-------------------------------------------------------------------------------
10. MISCELLANEOUS:
THE ABOVE SPACE IS FOR FILING OFFICE USE ONLY
-------------------------------------------------------------------------------------------------------------------------------
11. ADDITIONAL DEBTOR'S EXACT FULL LEGAL NAME - insert only one name (11a or 11b) - do not abbreviate or combine names
------------------------------------------------------------------------------------------------------------------------
11a. ORGANIZATION'S NAME
OR
------------------------------------------------------------------------------------------------------------------------
11b. INDIVIDUAL'S LAST NAME FIRST NAME MIDDLE NAME SUFFIX
------------------------------------------------------------------------------------------------------------------------
11c. MAILING ADDRESS CITY STATE POSTAL CODE COUNTRY
-------------------------------------------------------------------------------------------------------------------------------
11d. TAX ID #: SSN OR EIN ADD'L INFO RE 11e. TYPE OF ORGANIZATION 11f. JURISDICTION OF 11g. ORGANIZATIONAL
ORGANIZATION ORGANIZATION ID #, if any
DEBTOR [_] none
-------------------------------------------------------------------------------------------------------------------------------
12. [_] ADDITIONAL SECURED PARTY'S or[_] ASSIGNOR S/P'S NAME - insert only one name (12a or 12b)
--
------------------------------------------------------------------------------------------------------------------------
12a. ORGANIZATION'S NAME
------------------------------------------------------------------------------------------------------------------------
12b. INDIVIDUAL'S LAST NAME FIRST NAME MIDDLE NAME SUFFIX
-------------------------------------------------------------------------------------------------------------------------------
12c. MAILING ADDRESS CITY STATE POSTAL CODE COUNTRY
-------------------------------------------------------------------------------------------------------------------------------
13. This FINANCING STATEMENT covers 16. Additional collateral description:
[_] timber to be cut or [_] as-extracted collateral, or
[X] fixture filing. is filed as a
14. Description of real estate:
See attached Exhibit B.
15. Name and address of a RECORD OWNER of above-described real
estate (if Debtor does not have a record interest):
MTD Products Inc. 0000 Xxxxxxx Xxxx, Xxxxxx Xxxx, Xxxx 00000
----------------------------------------------------
17. Check only if applicable and check only one box.
Debtor is a [_] Trust or [_] Trustee acting with
respect to property
held in trust or
[_] Decedent's Estate
----------------------------------------------------
18. Check only if applicable and check only one box.
[_] Debtor is a TRANSMITTING UTILITY
[_] Filed in connection with a Manufactured-Home
Transaction -- effective 30 years
[_] Filed in connection with a Public-Finance
Transaction -- effective 30 years
-------------------------------------------------------------------------------------------------------------------------------
FILING OFFICE COPY-- NATIONAL UCC FINANCING STATEMENT ADDENDUM (FORM UCC1Ad) (REV. 07/29/98)
Exhibit A
------------- ------- ----------------------------------------------------------
Item # Qty. Description
------------- ------- ----------------------------------------------------------
1552 Lot- Blade Line No. 1 (New 1997), Consisting of:
. Xxxxxxxx & White 600 Ton Gib Guided Straight
Side Hydraulic Press, S/N C-4733 (New 1997), 600
ton, 72" x 60" Bed Area, 16" Stroke, 36"
Daylight, 1200" IPM, Advance 20 to 240 IPM
Pressing and 1200 IPM Return, 300 HP, 8-Point
Gibbing Flush Floor Design, Trabon Lube System,
Complete with Atlas Technology AC Servo Part
Transfer and Conveyor System, with PLC Controls,
Hydraulic Die and Conveyor System, with PLC
Controls, Hydraulic Die Clamping Top and Bottom
Platens and Perfecto Press Mounted Servo Feed
. (2) Setco 3-Axis Vertical Milling Stations,
Permanently Inclined, with Magnetic Scrap
Conveyors and Xxxxxx Hammer Panelmate PLC
Controls, Mounted on Common Base
. Perfecto Cabinet Mounted Servo Feeder, S/N
97160, with Separate Control.
. Perfecto Model S280411 Stock Straightener,
S/N97158, 7-Roll Straightener with (2) Sets
Hydraulic Pinch Rolls, Drop Away Threading
Table, Hydraulic Stock Xxxxxx, Hydraulic Drive,
Panelmate PLC Controller
. Perfecto Model RDO472-12 Xxxxxx Xxx Xxxxx
Xxxxxx Xxxx Xxxx, X/X 00000, 4,000 LB x 12"
Capacity, 72" OD, 20" to 24" ID, Swivel Base
and Hydraulic Hold Down
. Upton Industries Model DG2574 7A-Auto Power
6-Station Heat Treating Line, Station 1
Preheat, Station 2 High Heat, Station 3 Quench,
Station 4 Hot Oil, Station 5 Hot Wash, Station
6 Oil Dip, Gas Heated, Carousel Load and Unload
Stations, Honeywell Controllers, Eaton
Panelmate PLC Controllers
. (2) Custom Designed and Fabricated Blade
Straightening and Balance Stations, Automatic
Hydraulic Operated Down Acting Ram, with Auto
Conveyor Loader and Unloader, Xxxxxx Hammer
Panelmate PLC Control, Custom Designed and
Fabricated for Blade Production
--------------------------------------------------------------------------------
Exhibit A (Continued)
------------- ------- ----------------------------------------------------------
Item # Qty. Description
------------- ------- ----------------------------------------------------------
1555 Lot- Blade Line No. 2, Consisting of:
. USI Clearing 250 Ton Open Back Inclinable
Press, S/N 54- 1472, 250 Ton, 12" Throat, 26"
Shut Height, 6" Adjustment, 30 SPM, 50" x 30"
Bed Area, Cushions, T-Slotted Ram, Air Clutch,
Air Counterbalance
. Niagra Model SE2-200-60-36 2-Point Straight
Side Press, S/N42231, 200 ton, 60" x 36" Bed
Area, 12" Stroke, 38" Shut Height, 12"
Adjustment, 30 SPM, No Windows, Flush Floor, T-
Slotted Ram, Air Clutch
. (2) Setco Model SHL15FRY 3-Axis Permanently
Inclined Vertical Milling Machine, S/N 16415,
both Mounted on Common Base
. Littel Servo Feeder, S/N 90086-90, with Unico
Control Console
. Littel Model 408E-7PD Coil Stock Straightener,
S/N 90087-90, 7-Roll Straightener with (2) Sets
Hydraulic Pinch Rolls, 8" x 200" Capacity,
Variable Speed, Threading Table, Trabon Lube
System
. Littel Model 40-12 Double End Coil Reel, S/N
90088-90, 4,000 LB x 12" Capacity, Plain Type,
72" OD, Air Brake, Swivel Head, Manual
Expansion, Separate Mounted Pneumatic Hold Down
. Upton Model P-2475-6A 6-Station Heat Treating
Line, with Wash, Hot Rinse, High Heated Quench,
Risen and Oil Cycles, Honeywell Controllers,
Gas Heated, Carousel Load and Unload
. (3) Independent Blade Straightening and
Balancing Stations, Customer Designed and
Fabricated for Balancing Lawn Mower Blades
. OTHER BLADE LINE ASSETS
. Die Work On Blade Line
. Press #283 200T Rebuild Drive Ass'y
. Panel/Build Wiring-Blade Line
. 2 Salt Bath Furnaces Model #4A-42-30-50-SB-2737
and B-2738 and Install
. Blade Line-Install Furnace
. 1/4 Ton Chain Hoist-Blade Line
. Spindle-Blade Line
. Replace Festoon Trolleys-Crane 136B
. Assemble New Milling Machine on Blade Line
. Repair Gear Box-Blade Line
. Rebuild AC Drive 50A, 460V
. Replace Xxxxx Xxxxxxx AB136 Ser #10351
. Rebuild 3P Unit-Old Heat Treat Line
. Rebuild Clutch Drive-250T Press 54-1470
. Blade Line-Electronic Drive Old Line Coil Feed
. Salt Bath Furnace #B-2747
. 160 KVA Spare Transformer
--------------------------------------------------------------------------------
.
Exhibit B.
0000 X. 000xx Xxxxxx, Xxxxxxxxx XX
Description of Land
The land referred to in this Mortgage is described as follows:
Parcel No. 1A
Part of PPN 000-00-000
Situated in the City of Parma, County of Cuyahoga and State of Ohio and
known as being part of Original Xxxxx Xxxxxxxx Xxx Xx. 00, Xxxxxxxxx Xxxxx
and bounded and described as follows:
Beginning in the center line of West 130th Street, formerly Settlement Road,
(60 feet wide) at a point distant 366.03 feet from the Northwesterly corner
of said Original Lot No. 22;
Thence Northerly along said center line of West 130th Street, 95.08 feet to
the Southwesterly corner of a parcel of land conveyed to Xxxx E, Xxxx by deed
dated September l0,1925 and recorded in Volume 3378, Page 635 of Cuyahoga
County Records;
Thence Easterly along the Southerly line of land so convey to Xxxx X. Xxxx,
851.82 feet to the Northwesterly line of the right of way of The Cleveland
Lorain and Wheeling Railroad;
Thence Northeasterly along said Northwesterly line 222.97 feet to the
Northerly line of said Original Lot No. 22;
Thence South 89(Degrees) 10' 30" East along said line and passing through to
said right of way of The Cleveland Lorain and Wheeling Railroad, 121.88 feet
to a stone;
Thence South l(Degrees) 9' West 368.88 feet to a stone;
Thence North 89(Degrees) 3" West 1068.77 feet to the place of beginning be
the same more or less, but, subject to all legal highways
Excepting from the above described premises .655 of an acre of land deeded to
of The Cleveland Lorain and Wheeling Railroad by deed dated March 6; 1894 and
recorded in Volume 581, Page 140 of Cuyahoga County Records.
Further excepting therefrom that part of West 130th Street widened through
Journal Entry in Common Pleas Court Case No. 738323 filed May 20,196O.
i
Parcel No. 1B
Part of PPN 000-00-000
Situated in the City of Parma, County of Cuyahoga and State of Ohio and known as
being part of Original Xxxxx Xxxxxxxx Xxx Xx. 00, Xxxxxxxxx Xxxxx and bounded
and described as follows:
Beginning in the Northerly line of said Original Lot No. 22 at its intersection
with the center line of West 000xx Xxxxxx as dedicated and recorded on plat in
Volume 130 of Maps, Page 628 of Cuyahoga County Records;
Thence from said place of beginning South 89(Degrees) 10' 10" East along said
Northerly line of said Original Lot No. 22, (said Northerly line being also the
Northerly line of a 5.331 acre parcel of land heretofore conveyed by Xxxxxxx
Xxxx to Xxxx X. Xxxx by deed recorded in Volume 3378, Pages 635 and 636 of
Cuyahoga County Deed Records) 913.06 feet to the Northwesterly line of the right
of way of The Cleveland Lorain and Wheeling Railroad;
Thence South 32(Degrees) 59' 00" West along the Northwesterly line of the right
of way of The Cleveland Lorain and Wheeling Railroad, 222.97 feet to the
Southerly line of said 5.331 acre parcel so conveyed to Xxxx X. Xxxx as
aforesaid;
Thence Southwesterly along said Southerly line, 190.22 feet along the arc of a
circle deflecting to the right having a radius of 473.27 feet and a chord which
bears South 63(Degrees) 06' 10" West, 188.93 feet;
Thence North 88(Degrees) 40' 00" West 661.16 feet to said center line of West
000xx Xxxxxx so dedicated and recorded as aforesaid;
Thence Northeasterly along said center line along a curved line deflecting to
the right 272.56 feet to the place of beginning and containing 5.2616 acres of
land, said curved line having a radius of 1145.92 feet and a chord which bears
North 5(Degrees) 59' 58" East 271.91 feet be the same more or less, but subject
to all legal highways.
Excepting, however, from the above described premises, a parcel of land
containing 0.0715 acres of land heretofore dedicated to public use for highway
purposes as appears on the dedication plat of West 000xx Xxxxxx and recorded in
Volume 130, Page 628 of Cuyahoga County Map Records
Further excepting therefrom that part of West 130th Street widened through
Journal Entry in Common Pleas Court Case No. 738323 filed May 20, 1960.
Parcel No. 1C
Part of PPN 000-00-000
ii
Situated in the City of Parma, County of Cuyahoga and State of Ohio and known as
being part of Original Xxxxx Xxxxxxxx Xxx Xx. 00, Xxxxxxxxx Xxxxx and being
further known as part of the land which was conveyed to The Cleveland Trust
Company by deed from Xxxxxxxx Xxxxxxx and husband dated October 15, 1945 and
recorded in Volume 6001, Page 63 of Cuyahoga County Deed Records said land being
bounded and described as follows:
Beginning at a point in the center line of West 130th Street (formerly
Settlement Road) (60 feet wide) at the Northwesterly corner of the land conveyed
to the The Cleveland Trust Company as aforesaid, said point also being at the
Southwesterly corner of land conveyed to Xxxx Xxxxxx, by deed dated December 16,
1913 and recorded in Volume 1532, Page 464 of Cuyahoga County Deed Records;
Course No. 1 Thence South 89(Degrees) 49'29" East along the Northerly line of
the land conveyed to The Cleveland Trust Company, as aforesaid and being the
Southerly line of land now owned by Xxxxxxxx Xxxx, a distance of 717.08 feet to
a point in the Northwesterly line of land conveyed to The Cleveland Lorain and
Wheeling Railway Company, a predecessor of the Baltimore and Ohio Railroad
Company, by deed recorded in Volume 581, Page 140 of Cuyahoga County Deed
Records;
Course 2: Thence South 32(Degrees) 17'20" West along the Northwesterly line of
the land conveyed to The Cleveland Lorain and Wheeling Railway Company, as
aforesaid, a distance of 188.90 feet to a point in a line parallel with and
distant 160 feet by rectangular measurement Southerly from Course No.1;
Course No. 3: Thence North 89(Degrees) 49'29" West along said last mentioned
parallel lines a distance of 617.01 feet to a point in the center line of West
130th Street;
Course No. 4: Thence North 00(Degrees) 17'55" East along said center line of
West 000xx Xxxxxx along the Westerly line of said Xxx Xx. 00 a distance of 160
feet to the place of beginning, and containing exclusive of the area within West
130th Street, 2.340 acres more or less according to a survey by Xxxxxx X.
Xxxxxxx, Ohio Registered Surveyor No. 826, be the same more or less, but subject
to all legal highways.
Excepting therefrom that part of West 130th Street widened through Journal Entry
in Common Pleas Court Case No. 738323 filed May 20, 1960.
Parcel No. 1D
Part of PPN 000-00-000
Situated in the City of Parma, County of Cuyahoga and State of Ohio and known as
being part of Original Xxxxx Xxxxxxxx Xxx Xx. 00, Xxxxxxxxx Xxxxx and bounded
and described as follows:
iii
Beginning at a point in the center line of West 130th Street (formerly
Settlement Road), 60 feet wide, at the Southwesterly corner of the land conveyed
by The Cleveland Trust Company to Xxxxxxxx Xxxx by deed dated October 27, 1945
and recorded in Volume 6026, Page 566 of Cuyahoga County Records;
Course No. 1: Thence South 89 (Degrees) 49' 29" East along the Southerly line of
land so conveyed, a distance of 488.94 feet to a point in a line drawn parallel
to and distant 100 by rectangular measurement Northwesterly from the
Northwesterly line of the land conveyed to The Cleveland Lorain and Wheeling
Railway Company, a predecessor of the Baltimore and Ohio Railroad Company, by
deed recorded in Volume 581, Page 140 of Cuyahoga County Deed Records;
Course No. 2: Thence South 32 (Degrees) 17' 20" West along said last mentioned
parallel line a distance of 66.12 feet to a point in a line parallel to and
distant 56 feet by rectangular measurement Southerly from Course No. 1;
Course No. 3: Thence North 89 (Degrees) 49' 29" West along said last mentioned
parallel line a distance of 463.92 feet to a point in the center line of West
130th Street;
Course No. 4: Thence North 00 (Degrees) 17' 55" East along said center line of
West 000xx Xxxxxx along the Westerly line of said Xxx Xx. 00 a distance of 56
feet to the place of beginning and containing exclusive of the area within West
000xx Xxxxxx 58.00 of an acre more or less according to a survey made during
August, 1945 by Xxxxxx X. Xxxxxxx, Ohio Registered Surveyor No. 826, be the same
more or less, but subject to all legal highways.
Excepting therefrom that part of West 130th Street widened through Journal Entry
in Common Pleas Court Case No. 738323 filed May 20,1960.
Parcel No. 2
PPN: 000-00-000
Situated in the City of Parma, County of Cuyahoga and State of Ohio and known as
being parts of Original Parma Township Lots Nos. 22, 23, and 24 in the Tuckerman
Tract, together bounded and described as follows:
Beginning at a point in the center line of West 130th Street, formerly
Settlement Road, 60 feet wide, where the same is intersected by the
Southwesterly line of the land conveyed to The Cleveland, Lorain and Wheeling
Railway Company, a predecessor of the Baltimore Ohio Railroad Company by Deed
recorded in Volume 575, Page 141 of Cuyahoga Deed County Records;
Course No. 1: Thence North 00 (Degrees) 17' 55" East along the center line of
West 130th Street, and being along the Westerly line of said Lots Nos. 24, 23
and 22, a distance of 930.46 feet to a point
iv
in the Southwesterly corner of that certain 0.58 of an acre of land conveyed by
The Cleveland Trust Company to Xxxxxxxx Xxxx by Deed dated January 10, 1946, and
being Cuyahoga County Recorder's File No. 3135431, (Volume 6033, Page 155);
Course No. 2: Thence South 89(Degrees) 49' 29" East along the Southerly line of
said land conveyed as last aforesaid a distance of 463.92 feet to a point and
the Southeasterly corner thereof, said point being in a line parallel to and
distant 100 feet by rectangular measurement Northwesterly from the Northwesterly
line of land conveyed to said The Cleveland, Lorain and Wheeling Railway Company
by deed recorded in Volume 581, Page 140 of the Cuyahoga County Deed Records;
Course No. 3: Thence North 32(Degrees) 17' 20" East along said last mentioned
parallel line a distance of 66.12 feet to a point at the Northeasterly corner
said 0.58 of an acre parcel as aforesaid;
Course No, 4: Thence South 89(Degrees) 49' 29" East along the Southerly line of
the land conveyed by The Cleveland Trust Company to Xxxxxxxx Xxxx by Deed dated
October 27, 1945 and recorded in Volume 6026, Page 566 of the Cuyahoga County
Deed Records, a distance of 118.07 feet to a point in the Northwesterly line of
the land conveyed to The Cleveland, Lorain and Wheeling Railway Company as last
aforesaid;
Course No. 5: Thence South 32(Degrees) 17' 20" West along the Northwesterly line
of land conveyed to said The Cleveland, Lorain and Wheeling Railway Company as
last aforesaid, a distance of 1164.65 feet to the place of beginning and
containing, exclusive of the area within West 130th Street, 5.743 acres, more or
less, according to as Survey made during August, 1945, by Xxxxxx M, Xxxxxxx,
Ohio Registered Surveyor No. 826.
Excepting therefrom that part of West 130th Street widened through Journal Entry
in Common Pleas Court Case No. 738323 filed May 20,1960.
Parcel No. 3
PPN 000-00-000
The entire Southerly 150 feet of the premises described below, from its Easterly
line to its Westerly line, measured at right angles from its Southerly line, as
excepted in the Warranty Deed from MTD Products, Inc. to Xxxxxx X. Xxxxxx filed
for record June 1, 1972 and recorded in Volume 13000, Page 565 of Cuyahoga
County Records:
Situated in the City of Parma, County of Cuyahoga and State of Ohio and known as
being part of Original Xxxxx Xxxxxxxx Xxx Xx. 00, Xxxxxxxxx Xxxxx and bounded
and described as follows:
Beginning on the Southerly line of said Original Xxxxx Xxxxxxxx Xxx Xx. 00 at
its intersection with the center line of West 130th Street (formerly Settlement
Road) 60 feet wide;
v
Thence South 89(Degrees) 58' 57" East along said Southerly line of Original Lot
No. 21, 824.94 feet to the Southwesterly corner of land conveyed to the City of
Parma by deed dated October 15, 1954 and recorded in Volume 8209, Page 317 of
Cuyahoga County Records;
Thence North 0(Degrees) 09' 12" East, 342.54 feet to the Southerly side of
Incinerator Road, 38 feet wide, as dedicated by Volume 172 of Maps, Page 4 of
Cuyahoga County Records;
Thence South 89(Degrees) 42' 22" West, 678.83 feet to said center line of West
130th Street, 60 feet wide;
Thence Southerly along the center line of West 130th Street, 60 feet wide, an
arc distance of 370.83 feet, having a chord of which bears South 23(Degrees) 41'
57" West to the place of beginning.
Excepting therefrom that part conveyed to The Board of County Commissioners of
Cuyahoga County, Ohio, dated September 26, 196O and recorded in Volume 9992,
Page 449 of Cuyahoga County Records.
Further excepting, however, from the above described premises, a parcel of land
dedicated to public use for highway purposes as appears on the dedication plat
of West 000xx Xxxxxx and recorded in Volume 130, Page 628 of Cuyahoga County Map
Records
Parcel No. 4:
Easement Appurtenant to Parcel No.3 described above:
Easement for constructing, maintaining and using a railroad spur track reserved
in the Warranty Deed from The Ridge Manufacturing Company to The City of Parna
dated October 25, 1954 and recorded in Volume 8209, Page 317 of Cuyahoga County
Records and described as Easement No. 3 therein.
vi
