Common use of XXXXXX COMPANY Clause in Contracts

XXXXXX COMPANY. By: /s/ Xxxxxx X. Xxxxxx ------------------------------------------ Title: President --------------------------------------- (8/91) ANNEX C TO SCHEDULE NO. A-3 TO MASTER LEASE AGREEMENT DATED AS OF February 19, 1988 CERTIFICATE OF ACCEPTANCE To: General Electric Capital Corporation ** ("Lessor") Pursuant to the provisions of the above schedule and lease (collectively, the "Lease"), Lessee hereby certifies and warrants that (a) all Equipment listed below has been delivered and installed (if applicable); (b) Lessee has inspected the Equipment, and all such testing as it deems necessary has been performed by Lessee, Supplier or the manufacturer; and (c) Lessee accepts the Equipment for all purposes of the Lease, the purchase documents and all attendant documents. Lessee does further certify that as of the date hereof (i) Lessee is not in default under the Lease; (ii) the representations and warranties made by Lessee pursuant to or under the Lease are true and correct on the date hereof and (iii) Lessee has reviewed and approves of the purchase documents for the Equipment, if any. -------------------------------------------------------------------------------- DESCRIPTION OF EOUIPMENT -------------------------------------------------------------------------------- Manufacturer Serial Numbers Type and Model of Equipment -------------------------------------------------------------------------------- Okuma See Annex A See Annex A -------------------------------------------------------------------------------- /s/ Xxxxxxx X. Xxxxxxx ----------------------------------- Authorized Representative Dated: June 2, 1994 ---------------------------- f/k/a General Electric Credit Corporation ANNEX A TO SCHEDULE NO. A-3 TO MASTER LEASE AGREEMENT DATED AS OF February 19, 1988 DESCRIPTION OF EQUIPMENT Type and Model Number Cost Manufacturer/Vendor Serial Numbers of Equipment of Units Cinrock Division 1266, 1267, 1281 Okuma LB 15-N-500 CNC 6 $1,375,000.00 The Xxxxxx X. Xxxxxx 1284, 1285, 1282 Lathes with all Standard Company equipment and: P0 Xxx 000 x Xxxx Xxxxxxxx Xxxxxxx Xxxx Xxxxx, XX 00000 o Red Alarm Lamp A Invoice No. 13030910 o Yellow Cycle End Lamp o Load Monitor B o Tool Life Management o Chip Conveyor-Rear Discharge o User Task II-I/O Variables o Transformer Okuma OR20 Robot D-T-B15 including: o Double Handed Grippers o Xxxxx work grippers o Turret Mounted work pusher o Auto Door Open/Close o Robot to machine interface o Xxxxx Air Blower o Robot controller o Safety joints o Work Station conveyors o OP10 to OP20 Transfer conveyors o Work Turnover station o OP20 Exit Conveyors o Conveyor Drip Pans Total Invoice Cost $1,375,000.00 TOTAL CAPITALIZED $1,375,000.00 LESSOR'S COST ============= Initials: MSJ ARF ------------- ------------- Lessor Lessee ANNEX D TO SCHEDULE NO. A-3 TO MASTER LEASE AGREEMENT DATED AS OF February 19, 1988

XXXXXX COMPANY. By: ------------------------------------- Title: THE CHASE MANHATTAN BANK, as Agent and as a Lender By: /s/ Xxxxxx X. Xxxxxx ------------------------------------------ Xxxxx ------------------------------------- Title: Vice President --------------------------------------- (8/91) ANNEX C TO SCHEDULE NO6 The Lenders: ----------- GENERAL ELECTRIC CAPITAL CORPORATION By: /s/ Xxxxx Xxxxxxxx ------------------------------------- Title: Duly Authorized Signatory BANK OF MONTREAL By: ------------------------------------- Title: BHF-BANK AKTIENGESELLSCHAFT By: ------------------------------------- Title: CITICORP USA, INC. A-3 TO MASTER LEASE AGREEMENT DATED AS By: ------------------------------------- Title: DRESDNER BANK AG, NEW YORK AND GRAND CAYMAN BRANCHES By: ------------------------------------- Title: By: ------------------------------------- Title: MARINE MIDLAND BANK PLC, NEW YORK BRANCH By: ------------------------------------- Title: The Lenders: ----------- GENERAL ELECTRIC CAPITAL CORPORATION By: ------------------------------------- Title: BANK OF February 19MONTREAL By: /s/ Xxxxx Xxxxxxxxx ------------------------------------- Title: Director BHF-BANK AKTIENGESELLSCHAFT By: ------------------------------------- Title: CITICORP USA, 1988 CERTIFICATE INC. By: ------------------------------------- Title: DRESDNER BANK AG, NEW YORK AND GRAND CAYMAN BRANCHES By: ------------------------------------- Title: By: ------------------------------------- Title: MARINE MIDLAND BANK PLC, NEW YORK BRANCH By: ------------------------------------- Title: The Lenders: ----------- GENERAL ELECTRIC CAPITAL CORPORATION By: ------------------------------------- Title: BANK OF ACCEPTANCE ToMONTREAL By: General Electric Capital Corporation ** ("Lessor") Pursuant to the provisions of the above schedule and lease (collectively------------------------------------- Title: BHF-BANK AKTIENGESELLSCHAFT By: [SIGNATURES ILLEGIBLE] ------------------------------------- Title: V.P. A.V.P. CITICORP USA, the "Lease")INC. By: ------------------------------------- Title: DRESDNER BANK AG, Lessee hereby certifies and warrants that (a) all Equipment listed below has been delivered and installed (if applicable); (b) Lessee has inspected the EquipmentNEW YORK AND GRAND CAYMAN BRANCHES By: ------------------------------------- Title: By: ------------------------------------- Title: MARINE MIDLAND BANK PLC, and all such testing as it deems necessary has been performed by LesseeNEW YORK BRANCH By: ------------------------------------- Title: 6 The Lenders: ----------- GENERAL ELECTRIC CAPITAL CORPORATION By: ------------------------------------- Title: BANK OF MONTREAL By: ------------------------------------- Title: BHF-BANK AKTIENGESELLSCHAFT By: ------------------------------------- Title: CITICORP USA, Supplier or the manufacturer; and (c) Lessee accepts the Equipment for all purposes of the LeaseINC. By: [SIGNATURE ILLEGIBLE] ------------------------------------- Title: Attorney-in-Fact DRESDNER BANK AG, the purchase documents and all attendant documentsNEW YORK AND GRAND CAYMAN BRANCHES By: ------------------------------------- Title: By: ------------------------------------- Title: MARINE MIDLAND BANK PLC, NEW YORK BRANCH By: ------------------------------------- Title: The Lenders: ----------- GENERAL ELECTRIC CAPITAL CORPORATION By: ------------------------------------- Title: BANK OF MONTREAL By: ------------------------------------- Title: BHF-BANK AKTIENGESELLSCHAFT By: ------------------------------------- Title: CITICORP USA, INC. Lessee does further certify that as of the date hereof (i) Lessee is not in default under the Lease; (ii) the representations and warranties made by Lessee pursuant to or under the Lease are true and correct on the date hereof and (iii) Lessee has reviewed and approves of the purchase documents for the EquipmentBy: ------------------------------------- Title: DRESDNER BANK AG, if any. -------------------------------------------------------------------------------- DESCRIPTION OF EOUIPMENT -------------------------------------------------------------------------------- Manufacturer Serial Numbers Type and Model of Equipment -------------------------------------------------------------------------------- Okuma See Annex A See Annex A -------------------------------------------------------------------------------- NEW YORK AND GRAND CAYMAN BRANCHES By: /s/ Xxxxxxx Xxxxxxxxxxx X. Xxxxxxx ----------------------------------- Authorized Representative Dated------------------------------------- Title: June 2Assistant Treasurer By: /s/ Xxxx X. Xxxxxxx ------------------------------------- Title: Assistant Vice President MARINE MIDLAND BANK PLC, 1994 ---------------------------- f/k/a General Electric Credit Corporation ANNEX A TO SCHEDULE NO. A-3 TO MASTER LEASE AGREEMENT DATED AS OF February 19, 1988 DESCRIPTION OF EQUIPMENT Type and Model Number Cost Manufacturer/Vendor Serial Numbers of Equipment of Units Cinrock Division 1266, 1267, 1281 Okuma LB 15-N-500 CNC 6 $1,375,000.00 The Xxxxxx X. Xxxxxx 1284, 1285, 1282 Lathes with all Standard Company equipment andNEW YORK BRANCH By: P0 Xxx 000 x Xxxx Xxxxxxxx Xxxxxxx Xxxx Xxxxx, XX 00000 o Red Alarm Lamp A Invoice No. 13030910 o Yellow Cycle End Lamp o Load Monitor B o Tool Life Management o Chip Conveyor-Rear Discharge o User Task II-I/O Variables o Transformer Okuma OR20 Robot D-T-B15 including: o Double Handed Grippers o Xxxxx work grippers o Turret Mounted work pusher o Auto Door Open/Close o Robot to machine interface o Xxxxx Air Blower o Robot controller o Safety joints o Work Station conveyors o OP10 to OP20 Transfer conveyors o Work Turnover station o OP20 Exit Conveyors o Conveyor Drip Pans Total Invoice Cost $1,375,000.00 TOTAL CAPITALIZED $1,375,000.00 LESSOR'S COST ============= Initials: MSJ ARF ------------- ------------- Lessor Lessee ANNEX D TO SCHEDULE NO. A-3 TO MASTER LEASE AGREEMENT DATED AS OF February 19, 1988------------------------------------- Title:

XXXXXX COMPANY. By: /s/ Xxxxxx X. Xxxxxx ------------------------------------------ --------------------------------- Title: President --------------------------------------- Schedule I to Swing Line Note --------------- LOANS AND REPAYMENTS -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Unpaid Amount of Swing Amount of Swing Principal Balance of Line Loans Line Loans Swing Line Loans Made Repaid Notation Made By Date -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Irrevocable Standby Letter of Credit No. T-____ December 20, 1994 BENEFICIARY Xxxxx Paper Company Xxxxx Xxxxx Xxxxxxxxxxxx, Xxxxxxxxxxxx 00000 Gentlemen: At the request and for the account of SDW Acquisition Corporation, a Pennsylvania corporation (8/91) ANNEX C TO SCHEDULE NO. A-3 TO MASTER LEASE AGREEMENT DATED AS OF February 19the "BUYER"), 1988 CERTIFICATE OF ACCEPTANCE To: General Electric Capital Corporation ** and S.D. Xxxxxx Company, a Pennsylvania corporation ("Lessor") Pursuant to the provisions of the above schedule and lease (collectivelytogether with its successors, the "LeaseCOMPANY"), Lessee Chemical Bank (the "ISSUING BANK") hereby certifies establishes in favor of Xxxxx Paper Company, a Pennsylvania corporation ("XXXXX" and, together with its successors as provided herein, the "BENEFICIARY"), as direct or indirect obligor with respect to the obligations identified on SCHEDULE 1 attached hereto and warrants that made a part hereof (athe "SUPPORTED OBLIGATIONS"), this Irrevocable Standby Letter of Credit Number T-___ under which an aggregate amount not to exceed USD$170,484,931.59 is available to be drawn in accordance with the terms hereof (as reduced from time to time in accordance with the terms hereof, the "STATED AMOUNT") all Equipment listed below has been delivered effective immediately and installed expiring on the Expiration Date (if applicableas hereinafter defined); . This Irrevocable Standby Letter of Credit is transferable in its entirety but not in part only to a permitted successor of Xxxxx as obligor with respect to each Supported Obligation covered by this Irrevocable Standby Letter of Credit (ba "TRANSFEREE") Lessee has inspected upon delivery to the EquipmentIssuing Bank of written notice, in the form of ANNEX A attached hereto (a "TRANSFER NOTICE"), appropriately completed and all such testing executed by an Authorized Officer (as it deems necessary has been performed by Lesseehereinafter defined), Supplier or together with the manufacturer; original of this Irrevocable Standby Letter of Credit and (c) Lessee accepts the Equipment for all purposes payment of the Lease, the purchase documents and all attendant documentsIssuing Bank's reasonable administrative expenses relating to such transfer. Lessee does further certify that as of the date hereof (i) Lessee is not in default under the Lease; (ii) the representations and warranties made by Lessee pursuant to or under the Lease are true and correct on the date hereof and (iii) Lessee has reviewed and approves of the purchase documents for the Equipment, if any. -------------------------------------------------------------------------------- DESCRIPTION OF EOUIPMENT -------------------------------------------------------------------------------- Manufacturer Serial Numbers Type and Model of Equipment -------------------------------------------------------------------------------- Okuma See Annex A See Annex A -------------------------------------------------------------------------------- /s/ Xxxxxxx X. Xxxxxxx ----------------------------------- Authorized Representative Dated: June 2, 1994 ---------------------------- f/k/a General Electric Credit Corporation ANNEX A TO SCHEDULE NO. A-3 TO MASTER LEASE AGREEMENT DATED AS OF February 19, 1988 DESCRIPTION OF EQUIPMENT Type and Model Number Cost Manufacturer/Vendor Serial Numbers of Equipment of Units Cinrock Division 1266, 1267, 1281 Okuma LB 15-N-500 CNC 6 $1,375,000.00 The Xxxxxx X. Xxxxxx 1284, 1285, 1282 Lathes with all Standard Company equipment and: P0 Xxx 000 x Xxxx Xxxxxxxx Xxxxxxx Xxxx Xxxxx, XX 00000 o Red Alarm Lamp A Invoice No. 13030910 o Yellow Cycle End Lamp o Load Monitor B o Tool Life Management o Chip Conveyor-Rear Discharge o User Task II-I/O Variables o Transformer Okuma OR20 Robot D-T-B15 including: o Double Handed Grippers o Xxxxx work grippers o Turret Mounted work pusher o Auto Door Open/Close o Robot to machine interface o Xxxxx Air Blower o Robot controller o Safety joints o Work Station conveyors o OP10 to OP20 Transfer conveyors o Work Turnover station o OP20 Exit Conveyors o Conveyor Drip Pans Total Invoice Cost $1,375,000.00 TOTAL CAPITALIZED $1,375,000.00 LESSOR'S COST ============= Initials: MSJ ARF ------------- ------------- Lessor Lessee ANNEX D TO SCHEDULE NO. A-3 TO MASTER LEASE AGREEMENT DATED AS OF February 19, 1988Upon any such

XXXXXX COMPANY. By: /s/ Xxxxxx X. Xxxxxx ------------------------------------------ ---------------------------------------- Title: President --------------------------------------- (8/91) ANNEX C TO SCHEDULE NO------------------------------------- SUPER FOOD SERVICES, INC. A-3 TO MASTER LEASE AGREEMENT DATED AS By: ---------------------------------------- Title: ------------------------------------- XXXXXXX TRANSPORTATION SERVICES, INC. By: ---------------------------------------- Title: ------------------------------------- GTL TRUCK LINES, INC. By: ---------------------------------------- Title: ------------------------------------- PIGGLY WIGGLY NORTHLAND CORPORATION By: ---------------------------------------- Title: ------------------------------------- XXXXXXXX DAIRY OF February 19THE BLACK HILLS, 1988 CERTIFICATE OF ACCEPTANCE ToINC. By: General Electric Capital Corporation ** ("Lessor") Pursuant ---------------------------------------- Title: ------------------------------------- NEBRASKA DAIRIES, INC. By: ---------------------------------------- Title: ------------------------------------- ADDITIONAL GUARANTOR: XXXXXXXX'X DIVERSIFIED CORPORATION By: ---------------------------------------- Title: ------------------------------------- TRUSTEE: U.S. BANK TRUST NATIONAL ASSOCIATION EXHIBIT A GUARANTEE For value received, the undersigned hereby fully and unconditionally guarantees to the provisions Holder of each Note the cash payments in United States dollars of principal of, premium, if any, and interest on such Note in the amounts and at the time when due and interest on the overdue principal, premium, if any, and interest, if any, on such Note, if lawful, and the payment or performance of all other obligations of the above schedule and lease (collectively, Company under the "Lease"), Lessee hereby certifies and warrants that (a) all Equipment listed below has been delivered and installed (if applicable); (b) Lessee has inspected the Equipment, and all such testing as it deems necessary has been performed by Lessee, Supplier Indenture or the manufacturer; Notes, to the Holder of any such Note and (c) Lessee accepts the Equipment for Trustee, all purposes in accordance with and subject to the terms and limitations of such Note, Article Twelve of the Lease, the purchase documents Indenture and all attendant documentsthis Guarantee. Lessee does further certify that This Guarantee will become effective as of the date hereof (i) Lessee in accordance with Article Twelve of the Indenture and its terms shall be evidenced therein. The validity and enforceability of this Guarantee shall not be affected by the fact that it is not affixed to any particular Note. Capitalized terms used but not defined herein shall have the meanings ascribed to them in default under the Lease; Indenture dated as of April 24, 1998, by and among, INTER ALIA, Xxxx Xxxxx Company, the undersigned and U.S. Bank Trust National Association, as Trustee, as amended or supplemented (iiincluding as amended and supplemented by that First Supplemental Indenture dated as of June 10, 1999) (the representations "INDENTURE"). The obligations of the undersigned to the Holders of Notes and warranties made by Lessee to the Trustee pursuant to or under the Lease Guarantee and the Indenture are true and correct on the date hereof and (iii) Lessee has reviewed and approves expressly set forth in Article Twelve of the purchase documents Indenture and reference is hereby made to the Indenture for the Equipmentprecise terms of the Guarantee and all of the other provisions of the Indenture to which this Guarantee relates. THIS NOTE GUARANTEE WILL BE GOVERNED BY AND CONSTRUED IN ACCORDANCE WITH THE LAWS OF THE STATE OF NEW YORK WITHOUT REGARD TO PRINCIPLES OF CONFLICTS OF LAW. THE GUARANTOR HEREUNDER AGREES TO SUBMIT TO THE NON-EXCLUSIVE JURISDICTION OF THE STATE OF NEW YORK IN ANY ACTION OR PROCEEDING ARISING OUT OF OR RELATING TO THE INDENTURE, if anyTHE NOTES OR THIS NOTE GUARANTEE. -------------------------------------------------------------------------------- DESCRIPTION OF EOUIPMENT -------------------------------------------------------------------------------- Manufacturer Serial Numbers Type and Model of Equipment -------------------------------------------------------------------------------- Okuma See Annex A See Annex A -------------------------------------------------------------------------------- /s/ Xxxxxxx X. Xxxxxxx ----------------------------------- Authorized Representative Dated: June 2, 1994 ---------------------------- f/k/a General Electric Credit Corporation ANNEX A TO SCHEDULE NO. A-3 TO MASTER LEASE AGREEMENT DATED AS OF February 19, 1988 DESCRIPTION OF EQUIPMENT Type and Model Number Cost Manufacturer/Vendor Serial Numbers of Equipment of Units Cinrock Division 1266, 1267, 1281 Okuma LB 15-N-500 CNC 6 $1,375,000.00 The Xxxxxx X. Xxxxxx 1284, 1285, 1282 Lathes with all Standard Company equipment and: P0 Xxx 000 x Xxxx Xxxxxxxx Xxxxxxx Xxxx Xxxxx, XX 00000 o Red Alarm Lamp A Invoice No. 13030910 o Yellow Cycle End Lamp o Load Monitor B o Tool Life Management o Chip Conveyor-Rear Discharge o User Task II-I/O Variables o Transformer Okuma OR20 Robot D-T-B15 including: o Double Handed Grippers o Xxxxx work grippers o Turret Mounted work pusher o Auto Door Open/Close o Robot This Guarantee is subject to machine interface o Xxxxx Air Blower o Robot controller o Safety joints o Work Station conveyors o OP10 to OP20 Transfer conveyors o Work Turnover station o OP20 Exit Conveyors o Conveyor Drip Pans Total Invoice Cost $1,375,000.00 TOTAL CAPITALIZED $1,375,000.00 LESSOR'S COST ============= Initials: MSJ ARF ------------- ------------- Lessor Lessee ANNEX D TO SCHEDULE NO. A-3 TO MASTER LEASE AGREEMENT DATED AS OF February 19, 1988release upon the terms set forth in the Indenture.

XXXXXX COMPANY. ByBy ______________________________________ Its __________________________________ Attest: /s/ ________________________________________ _________________________________________ Warrant Agent By ______________________________________ Its___________________________________ Attest: [Form of Warrant] Unless extended, Void After 3:30 P.M., New York City time, _______* _______, ____ [IF THE WARRANTS ARE ATTACHED TO OTHER SECURITIES, INSERT THE FOLLOWING -- [UNTIL ______________,] THE WARRANTS REPRESENTED BY THIS CERTIFICATE SHALL NOT BE TRANSFERABLE APART FROM THE _____________ TO WHICH THEY ARE ATTACHED, ANY TRANSFER OF THE _____________ SHALL BE DEEMED A TRANSFER OF THE WARRANTS ATTACHED THERETO, AND ANY ATTEMPT OF TRANSFER THE WARRANTS APART FROM THE _____________ SHALL BE VOID AND OF NO EFFECT.] No. ___ Warrant to Purchase ____ Shares of Common Stock CLASS __ WARRANT X.X. XXXXXX COMPANY FOR VALUE RECEIVED, X.X. Xxxxxx X. Xxxxxx ------------------------------------------ Title: President --------------------------------------- Company (8/91) ANNEX C TO SCHEDULE NO. A-3 TO MASTER LEASE AGREEMENT DATED AS OF February 19, 1988 CERTIFICATE OF ACCEPTANCE To: General Electric Capital Corporation ** ("Lessor") Pursuant to the provisions of the above schedule and lease (collectively, the "LeaseCompany"), Lessee hereby certifies upon the surrender [after _______________] and warrants that prior to 3:30 P.M., New York City time, ________* _______, ____ (aunless extended) all Equipment listed below has been of this Warrant for exercise, with the exercise form on the reverse side hereof duly executed, at the office of ______________________, will sell and deliver or cause to be sold and delivered to __________________ or assigns (the "Warrant Holder") a certificate or certificates for the number of whole shares purchasable, as indicated above, of fully paid and installed non-assessable shares of Common Stock (if applicable); (b$1.00 par value) Lessee has inspected the Equipment, and all such testing as it deems necessary has been performed by Lessee, Supplier or the manufacturer; and (c) Lessee accepts the Equipment for all purposes of the LeaseCompany (the "Shares"), for which this Warrant is exercised, at a price of $_____ per Share (the purchase documents "Warrant Price"), subject to all the terms, provisions and all attendant documents. Lessee does further certify that conditions of a Common Stock Warrant Agreement dated as of ____________, ____ (the date hereof "Warrant Agreement"), executed by the Company and _________________________________________________ (i) Lessee the "Warrant Agent"), which Warrant Agreement is not in default under the Lease; (ii) the representations hereby incorporated herein by reference and warranties made by Lessee pursuant to or under the Lease are true and correct on the date hereof and (iii) Lessee has reviewed and approves of the purchase documents for the Equipment, if any. -------------------------------------------------------------------------------- DESCRIPTION OF EOUIPMENT -------------------------------------------------------------------------------- Manufacturer Serial Numbers Type and Model of Equipment -------------------------------------------------------------------------------- Okuma See Annex A See Annex A -------------------------------------------------------------------------------- /s/ Xxxxxxx X. Xxxxxxx ----------------------------------- Authorized Representative Dated: June 2, 1994 ---------------------------- f/k/a General Electric Credit Corporation ANNEX A TO SCHEDULE NO. A-3 TO MASTER LEASE AGREEMENT DATED AS OF February 19, 1988 DESCRIPTION OF EQUIPMENT Type and Model Number Cost Manufacturer/Vendor Serial Numbers of Equipment of Units Cinrock Division 1266, 1267, 1281 Okuma LB 15-N-500 CNC 6 $1,375,000.00 The Xxxxxx X. Xxxxxx 1284, 1285, 1282 Lathes with all Standard Company equipment and: P0 Xxx 000 x Xxxx Xxxxxxxx Xxxxxxx Xxxx Xxxxx, XX 00000 o Red Alarm Lamp A Invoice No. 13030910 o Yellow Cycle End Lamp o Load Monitor B o Tool Life Management o Chip Conveyor-Rear Discharge o User Task II-I/O Variables o Transformer Okuma OR20 Robot D-T-B15 including: o Double Handed Grippers o Xxxxx work grippers o Turret Mounted work pusher o Auto Door Open/Close o Robot to machine interface o Xxxxx Air Blower o Robot controller o Safety joints o Work Station conveyors o OP10 to OP20 Transfer conveyors o Work Turnover station o OP20 Exit Conveyors o Conveyor Drip Pans Total Invoice Cost $1,375,000.00 TOTAL CAPITALIZED $1,375,000.00 LESSOR'S COST ============= Initials: MSJ ARF ------------- ------------- Lessor Lessee ANNEX D TO SCHEDULE NO. A-3 TO MASTER LEASE AGREEMENT DATED AS OF February 19, 1988part hereof.