WIND TIE Sample Clauses

WIND TIE. Where size of wind tie not indicated on drawings it shall be of MS flat iron of size 40mm x 6mm. The lap of wind tie shall be minimum 150 mm fixed together with 3 bolts washers and nuts of 12 mm diameter and of adequate length but not less than 50 mm.

Related to WIND TIE

  • Position and Title 1You are employed on a full time basis in the position described at Item 3 of the Schedule.

  • Conveyance of Subsequent Receivables (a) If there is a Funding Period, subject to satisfaction of the conditions set forth in Section 2.03(b) below, in consideration of the Issuing Entity’s delivery on the related Subsequent Transfer Date, if any, to or upon the order of the Depositor of the amount described in Section 5.01(d) to be delivered to the Depositor and the increase in the value of the Certificates as a result of such sale, the Depositor does hereby agree to sell, transfer, assign, set over and otherwise convey to the Issuing Entity, without recourse (except as provided in Section 3.02), pursuant to an assignment in substantially the form of Exhibit D (a “Subsequent Transfer SSA Assignment”), all right, title and interest of the Depositor in, to and under: (i) the Subsequent Receivables identified in the Subsequent Transfer SSA Assignment (all of which are identified in World Omni’s computer files by a code indicating such Subsequent Receivables are owned by the Trust and pledged to the Indenture Trustee) and all monies received thereon and in respect thereof after the related Subsequent Cutoff Date; (ii) the security interests in, and the liens on, the Financed Vehicles granted by Obligors in connection with the Subsequent Receivables and any other interest of the Depositor in the Financed Vehicles; (iii) any proceeds with respect to the Subsequent Receivables from claims on any physical damage, credit life or disability insurance policies covering the Financed Vehicles or Obligors; (iv) any Financed Vehicle that shall have secured a Subsequent Receivable and shall have been acquired by or on behalf of the Depositor, the Servicer or the Trust; (v) all “accounts,” “chattel paper,” “general intangibles” and “promissory notes” (as such terms are defined in the Uniform Commercial Code as from time to time in effect) constituting or relating to the foregoing; and (vi) the proceeds of any and all of the foregoing (including Liquidation Proceeds); provided, however, that the foregoing items (i) through (vi) shall not include the Notes and Certificates. It is the intention of the Depositor and the Issuing Entity that the assignment and transfer contemplated by this Section 2.03 constitute (and shall be construed and treated for all purposes, other than for tax purposes, as) a true and complete sale of such Subsequent Receivables, if any, and the other property of the Depositor specified in Section 2.03(a) hereof, conveying good title thereto free and clear of any liens and encumbrances, from the Depositor to the Issuing Entity. However, in the event that such conveyance is deemed to be a pledge to secure a loan (in spite of the express intent of the parties hereto that this conveyance constitutes, and shall be construed and treated for all purposes, other than for tax purposes, as a true and complete sale), the Depositor hereby grants to the Issuing Entity, for the benefit of the Noteholders, a first priority perfected security interest in all of the Depositor’s right, title and interest in, to and under the Subsequent Receivables, if any, and the other property of the Depositor specified in Section 2.03(a) hereof whether now existing or hereafter created and all proceeds of the foregoing to secure the loan deemed to be made in connection with such pledge and, in such event, this Agreement shall constitute a security agreement under applicable law. (b) If there is a Funding Period, the Depositor shall transfer to the Issuing Entity Subsequent Receivables and the other property and rights related thereto described in Section 2.03(a) above only upon the satisfaction of each of the following conditions precedent on or prior to the related Subsequent Transfer Date: (i) the Funding Period shall not have terminated; (ii) each of the representations and warranties made by the Depositor pursuant to Section 3.01 with respect to such Subsequent Receivables shall be true and correct as of the related Subsequent Transfer Date with the same effect as if then made, and the Depositor shall have performed all obligations to be performed by it hereunder on or prior to such Subsequent Transfer Date; (iii) the Depositor shall have delivered to the Owner Trustee and the Indenture Trustee a duly executed Subsequent Transfer SSA Assignment, including the Schedule of Receivables (which schedule shall be deemed to supplement the existing Schedule of Receivables in effect at such time); (iv) the applicable Reserve Account Subsequent Transfer Deposit for such Subsequent Transfer Date shall have been deposited in the Reserve Account pursuant to Section 5.01(d); (v) the Depositor shall, at its own expense, on or prior to each Subsequent Transfer Date, indicate in its computer files that the Subsequent Receivables conveyed on such date have been sold to the Issuing Entity pursuant to this Agreement and the related Subsequent Transfer SSA Assignment; (vi) the Depositor shall have taken any action required to maintain the first priority perfected ownership interest of the Issuing Entity in the Owner Trust Estate and the first priority perfected security interest of the Indenture Trustee in the Collateral; (vii) the Receivables in the Trust (after giving effect to the conveyance of the Subsequent Receivables to the Trust on such Subsequent Transfer Date) shall meet the following criteria: (A) the weighted average Annual Percentage Rate of the Receivables in the Trust shall not be less than [RESERVED]%, (B) not less than [RESERVED]% of the Aggregate Starting Principal Balance of the Receivables shall represent financings of new Financed Vehicles, (C) no Subsequent Receivable shall have a remaining term in excess of [RESERVED] months, (D) the weighted average original term to maturity of the Receivables in the Trust shall not be greater than [RESERVED] months, (E) not less than [RESERVED]% of Aggregate Starting Principal Balance of the Receivables shall represent financings of Toyota vehicles, (F) the weighted average FICO score of the Receivables in the Trust shall not be less than [RESERVED] and (G) such other criteria as may be required by the Rating Agencies; (viii) the Depositor shall have delivered to the Indenture Trustee and the Owner Trustee an Officers’ Certificate confirming the satisfaction of the conditions specified in this Section 2.03(b); and (ix) the Depositor shall have delivered to the Trust, the Indenture Trustee and the Rating Agencies an Opinion of Counsel with respect to the transfer of such Subsequent Receivables substantially in the form of the Opinion of Counsel delivered to the Rating Agencies on the Closing Date. (c) If there is a Funding Period, the Depositor covenants to transfer to the Issuing Entity pursuant to Section 2.03(a) before the termination of the Funding Period Subsequent Receivables with an aggregate Starting Principal Balance less the Yield Supplement Overcollateralization Amount for such Subsequent Receivables as of the related Subsequent Cutoff Date equal to approximately the result of the Pre-Funding Account Initial Deposit divided by [RESERVED]% to the extent such Receivables were transferred to the Depositor under the Receivables Purchase Agreement.

  • Valid Title Such Selling Stockholder has, and at the Closing Time will have, valid title to the Securities to be sold by such Selling Stockholder free and clear of all security interests, claims, liens, equities or other encumbrances and the legal right and power, and all authorization and approval required by law, to enter into this Agreement and the Power of Attorney and Custody Agreement and to sell, transfer and deliver the Securities to be sold by such Selling Stockholder.

  • Purchased Assets Upon the terms set forth in this Agreement and subject to the conditions hereof and the provisions of Section 1.6, at the Closing, Seller will sell, transfer, assign, convey and deliver to Buyer, and Buyer will purchase and accept from Seller, all right, title and interest of Seller in, to and under the following properties (collectively, the “Purchased Assets”): (a) subject to Section 1.5, the Land, together with all structures, buildings, improvements, machinery, fixtures, and equipment affixed or attached to the Land and all easements and rights appurtenant thereto, including: (i) all easements, privileges and rights belonging or in any way appurtenant to the Land; and (ii) any and all air rights, subsurface rights, development rights, and water rights appurtenant to the Land (all of the foregoing being collectively referred to herein as the “Owned Real Property”), but expressly excluding the Removed Real Property; (b) all tangible personal property owned by Seller and used in connection with the Owned Real Property as of the date of this Agreement, including, specifically, without limitation, all equipment, furniture, tools and supplies (including all construction materials, work-in-process, finished goods, goods in transit, manufactured and purchased supplies and other materials) and any other personal property as is owned by the Seller, whether located on the Owned Real Property or with suppliers or others as of the date of this Agreement (collectively, the “Personal Property”); (c) the Home Sale Contracts as of the Closing Date (the “Assigned Home Sale Contracts”); (d) all ▇▇▇▇▇▇▇ money deposits and other forms of security (whether or not held in escrow) held or controlled by or for Seller pursuant to the Assigned Home Sale Contracts (“Home Sale Contract Deposits”); (e) all customer and vendor lists, and business and financial records, books, and documents (including any books and records or documents relating to Taxes imposed on the Purchased Assets), to the extent any of the foregoing are related to or used with respect to the Owned Real Property, Personal Property or the Assigned Contracts, including all of Seller’s rights to architectural and engineering plans, subject to applicable fees for the reuse, signing and sealing of such plans, water and sewer, electrical and building plans, and all other plans and specifications, drawings and other similar documents, in each case relating to the Owned Real Property; (f) all rights, obligations, and duties of Seller arising out of Contracts relating to the construction of Housing Units in the Ordinary Course or otherwise listed on Section 1.1(f) of the Disclosure Schedule (other than those related to Housing Units that have been sold prior to the Closing) (collectively, the “Other Contracts” and, together with the Assigned Home Sale Contracts, the “Assigned Contracts”); (g) all Permits in the name of Seller and related to the Owned Real Property (the “Assigned Permits”); and (h) all of Seller’s rights as declarant or similar capacity under CC&Rs with respect to Associations.

  • Title to Transferred Assets From and including the Closing Date until such Servicing Rights Assets are transferred to Purchaser under Section 2.2, Seller shall be the sole holder and owner of the Servicing Rights Assets and shall have good and marketable title to the Servicing Rights Assets, free and clear of any Liens. Upon the sale of such Servicing Rights Assets pursuant to Section 2.2, Seller will transfer to Purchaser good and marketable title to the Servicing Rights Assets free and clear of any Liens. Seller is the sole holder and owner of the Rights to MSRs and the sale and delivery to Purchaser of the Rights to MSRs pursuant to the provisions of this Sale Supplement will transfer to Purchaser good and marketable title to the Rights to MSRs free and clear of any Liens.