Common use of Vehicle type Clause in Contracts

Vehicle type. 3.1.1. The application for approval of a vehicle type with regard to the protection of the driver against the steering mechanism in the event of impact shall be submitted by the vehicle manufacturer or by his duly accredited representative. 3.1.2. It shall be accompanied by the undermentioned documents in triplicate and the following particulars: 3.1.2.1. A detailed description of the vehicle type with respect to the structure, dimensions, lines and constituent materials of that part of the vehicle forward of the steering control; 3.1.2.2. Drawings, on an appropriate scale and in sufficient detail, of the steering mechanism and of its attachment to the vehicle chassis and body; 3.1.2.3. A technical description of that mechanism; 3.1.2.4. An indication of the mass of the vehicle in running order; 3.1.2.5. Evidence that the steering control has been approved in accordance with paragraph 5.2 of the Regulation, if applicable. 3.1.2.6. Evidence that the steering mechanism complies with the specifications of paragraph 5.2.2. of UN Regulation No. 94 or with the specifications of paragraph 5.2.2.1. of UN Regulation No. 137 if the application for approval is submitted by the applicant pursuant paragraph 5.1.2. below. 3.1.2.7. Evidence that the steering control complies with the specifications of paragraphs 5.2.1.4. and 5.2.1.5. of UN Regulation No. 94 or with the specifications of paragraphs 5.2.1.1.3. and 5.2.1.1.4. of UN Regulation No. 137 if the application for approval is submitted by the applicant pursuant paragraph 5.2.1. below. 3.1.2.8. A general description of the electrical power source type, location and the electric power train (e.g. hybrid, electric). 3.1.3. The following shall be submitted to the Technical Service responsible for conducting approval tests: 3.1.3.1. A vehicle, representative of the vehicle type to be approved, for the test referred to in paragraph 5.1. below; 3.1.3.2. At the manufacturer's discretion, with the agreement of the technical service, either a second vehicle, or those parts of the vehicle regarded by him as essential for the test referred to in paragraphs 5.2. and 5.3. below. 3.1.3.3. The competent authority shall verify the existence of satisfactory arrangements for ensuring effective control of the conformity of production before type approval is granted.