Common use of Temporary Traffic Control Clause in Contracts

Temporary Traffic Control. Install and maintain temporary traffic control devices adjacent to and within the project as required by the approved traffic control plan and the MUTCD. Install and maintain traffic control devices as follows: (a) Furnish and install traffic control devices before the start of construction operations. (b) All detours outside of clearing limits will be approved in writing by the Contracting Officer as part of the traffic control plan. (c) Install only those traffic control devices needed for each stage or phase. (d) Relocate temporary traffic control devices as necessary. (e) Remove devices that no longer apply to the existing conditions. (f) Immediately replace any device that is lost, stolen, destroyed, or inoperative. (g) Keep temporary traffic control devices clean. (h) Remove all temporary traffic control devices upon contract completion or when approved. (i) When required, use flaggers certified by the American Traffic Safety Services Association, the National Safety Council, the International Municipal Signal Association, a state agency, or other acceptable organization. Perform the work described under MUTCD Part 6. Use type III, VII, VIII, or IX retroreflective sheeting on flagger paddles. Do not use flags. Flaggers must wear high visibility safety apparel as required by MUTCD 6E.02.