Sizes Sample Clauses

Sizes. The Container sizes to be provided to Single-Family, Multi-Family, Commercial, and Agency Facility Customers are specified in Attachment D. Contractor shall provide Customers with a choice of Container capacities specified in Attachment D, and Customers may select their preferred Container size(s).
Sizes. For spans of 150 ft. or less, Table R-l gives the minimum sizes of suspension strand to be used for supporting different sizes of serial cable. Table R-1 Recommended Minimum Sizes of Suspension Strand Weights of Cable in Suspension Strand (Nominal Pounds per Foot Ultimate Strength in Pounds) Less than 2.25 6,000 2.25 to 5 10,000 Exceeding 5 and less than 8.5 16,000 R-3 For spans exceeding 150 ft. or for heavier cables, a proportionately larger suspension strand or other proportionately stronger means of support should be used.
Sizes. 2.3.1 The size is acceptable as per WI-8.2.4-2.008, if the sample fall within the dimensions defined in the table below. S = dimension established during slitting of master roll into smaller width mini rolls P = dimension established during packaging when the pads are cut off the smaller width mini rolls
Sizes. All lengths and width measurements are quoted ±1mm tolerance except where polished and the limit is +/- 2mm. Tubes and rods are only guaranteed to have the shape required if treated with respect for the plastics malleability. If with prior written agreement materials being cut by laser or CNC router can have a tolerance of ± 0.5mm or possibly lower. If that is no use then let us know and will try & comply with your needs. 9.9.2 SUPPLIERS ADVICE: Any advice is given in good faith. We will try our best to help but you should not rely solely on our advice.
Sizes. 2.3.1 The size is acceptable as per WI-8.2.4-2.008, if the sample falls within the dimensions defined in the table below: (3/4” x 12”) P = dimension established during packaging when the pads are cut off the smaller width mini rolls 2.4 APPEARANCE