Common use of Scaling Clause in Contracts

Scaling. The Company shall supply scale sheets to employ- ees each pile on separate scale slips. When a dispute over the scale arises, it shall be dealt with, in the first instance by the Company Check Scaler, the employees involved and the Camp Xxxxxxx. The check scale must be called for by the employees within fourteen calendar days after receiving the original scale slip and then must be completed and returned to the employees within fourteen calendar days after notifying their immediate supervisor. The maximum relative scaling variation is plus or minus Four Percent on stack scale and no adjustments will be made unless the variation exceeds plus or minus Four Percent in which case the actual pile as scaled will be adjusted accordingly to reflect the full difference. If no agreement is reached it shall be dealt with by the Chief Scaler, Union Business Agent or his appointee, the employees involved and a licensed Manitoba Scaler agreed upon by both parties. The tree length deck will be slashed or bucked into and lengths and will be cube-scaled by this licensed scaler. On the third and binding cube scale if it differs from the original scale by more than plus or minus Three Percent of the original scale, the original scale will be adjusted accordingly and the cost for the independent scaler will be charged to the party who was out of favour with the final and binding scale. In the event the Manitoba Scaling Manual is changed to provide for tree-length scaling this clause will be reviewed to reflect the change(s). A Committee will be formed consisting of the Wood- lands Manager, Business Agent of the Union, one employee representing the Company and one employee representing the to meet as required to review check scaling requests and procedures. Pieceworkers intending to quit shall give the Com- pany Xxxxxxx reasonable notice of leaving and the scalers shall scale him up within three days. Such time limit shall be exclusive of Sundays and holidays. It is understood the intent of this section is that the Company will endeavour to have the pieceworkers final scale completed and the paid in accordance with the final scale prior to the worker leaving the operation. ARTICLE

Scaling. The Company shall supply scale sheets to employ- ees employees itemizing each pile on separate scale slips. When a dispute over the scale arises, it shall be dealt with, in the first instance by the Company Check Scaler, the employees involved and the Camp Xxxxxxx. The check scale must be called for by the employees within fourteen (14) calendar days after receiving the original scale slip and then must be completed and returned to the employees within fourteen (14) calendar days after notifying their immediate supervisor. The maximum relative scaling variation is plus or minus Four Percent (+/- ) four percent (4%) on stack scale and no adjustments will be made unless the variation exceeds plus or minus Four Percent four percent (4%) in which case the actual pile as scaled will be adjusted accordingly to reflect the full difference. If no agreement is reached it shall be dealt with by the Chief Scaler, Union Business Agent or his appointee, the employees involved and a licensed Manitoba Scaler agreed upon by both parties. The tree length deck will be slashed or bucked into 16'6" and 8'6" lengths and will be cube-scaled by this licensed scaler. On the third (3rd) and final binding cube scale if it differs from the original scale by more than plus or minus Three Percent three percent (3%) of the original scale, the original scale will be adjusted accordingly and the cost for the independent scaler will be charged to the party who was out of favour with the final and binding scale. In the event the Manitoba Scaling Manual is changed to provide for tree-length scaling this clause will be reviewed to reflect the change(s). A Committee will be formed consisting of the Wood- lands Woodlands Manager, Business Agent of the Union, one employee representing the Company and one employee representing the to meet as required to review check scaling requests and procedures. Pieceworkers intending to quit shall give the Com- pany Company Xxxxxxx reasonable notice of leaving and the scalers shall scale him up within three (3) days. Such time limit shall be exclusive of Sundays and holidays. It is understood the intent of this section is that the Company will endeavour to have the pieceworkers final scale completed and the worker paid in accordance with the final scale prior to the worker leaving the operation. ARTICLE

Scaling. The Company Prior to removal from the Sale Area, Buyer shall supply scale sheets mark all logs with a distinctive brand of a character and in a manner mutually agreeable to employ- ees each pile on separate scale slipsBuyer and Seller. When a dispute over the scale arises, it All logs removed shall be dealt withscaled by the Official Rules. Buyer shall promptly make a written request to said Bureau for the Special Scale of logs described as Xxxxxxx-fir special cull logs and blocks, wormy cedar, white wood and Xxxxxxx-fir utility logs, in accordance with Official Rules of said Bureau and shall also request that all logs qualifying as Number-4 sawmill grade in the first instance General Scaling and Grading Rules of the Official Rules be scaled and reported so as to indicate the volume of logs which meet a minimum net of 20 board feet or more. Scaling shall be performed at such point or points as are determined by Seller. No logs shall be removed therefrom until scaling has been completed. The cost of scaling shall be borne by Xxxxx. Buyer shall arrange for and carry out a system of load tickets for reporting each load of logs trucked from the Sale Area. For each truckload removed, there shall be prepared at the point of loading, at least in triplicate, a serially numbered ticket showing for that particular truckload, its destination, the date, the number of logs of each species and the total number of logs. Additional data desired by Buyer may be added. The truck driver shall carry one copy, which shall be subject to examination by Seller, until the logs have been dumped or delivered, and one copy shall be made promptly available to Seller. Seller may at any time, at points agreed upon with Xxxxx, examine any truckload of logs from the Sale Area to check the branding and to compare the logs on the truck with truckload tickets. All costs of furnishing copies of all individual scale tickets and Bureau Certificates to the Seller’s representative will be borne by the Company Check Scaler, the employees involved and the Camp XxxxxxxBuyer. The check scale must be called for by the employees within fourteen calendar days after receiving the original scale slip and then must be completed and returned to the employees within fourteen calendar days after notifying their immediate supervisor. The maximum relative scaling variation is plus or minus Four Percent on stack scale and no adjustments will be made unless the variation exceeds plus or minus Four Percent in which case the actual pile as scaled will be adjusted accordingly to reflect the full difference. If no agreement is reached it shall be dealt with by the Chief Scaler, Union Business Agent or his appointee, the employees involved and a licensed Manitoba Scaler agreed upon by both parties. The tree length deck will be slashed or bucked into and lengths and will be cube-scaled by this licensed scaler. On the third and binding cube scale if it differs from the original scale by more than plus or minus Three Percent of the original scale, the original scale will be adjusted accordingly and the cost for the independent scaler will be charged to the party who was out of favour with the final and binding scale. In the event the Manitoba Scaling Manual is changed to provide for tree-length scaling this clause will be reviewed to reflect the change(s). A Committee will be formed consisting of the Wood- lands Manager, Business Agent of the Union, one employee representing the Company and one employee representing the to meet as required to review check scaling requests and procedures. Pieceworkers intending to quit shall give the Com- pany Xxxxxxx reasonable notice of leaving and the scalers shall scale him up within three days. Such time limit shall be exclusive of Sundays and holidays. It is understood the intent of this section is that the Company will endeavour Xxxxx agrees to have the pieceworkers final scale completed and the paid in accordance with the final scale prior Scaling Bureau make available to the worker leaving Seller’s representative the operationlog truck ticket detail and weekly summary. ARTICLEXxxxx will transmit such information to the Seller’s representative electronically. Buyer will have the Scaling Bureau furnish directly to the Seller’s representative a copy of each scale certificate and detail sheet prepared by the Scaling Bureau showing gross and net scale for each species and grade of logs removed from the Sale Area during the period reported. All data transmitted by the Scaling Bureau to the Seller’s representative will be at Buyer’s expense. Logs bucked in lengths 41-feet plus trim and greater will be segment scaled, and diameter inside bark measurements will be obtained at both the small and large ends of each log. The scaling diameters of the lower segment or segments of split scaled logs shall be determined by apportioning the difference between inside bark diameters of the small and large ends. Buyer will make a written request to the appropriate scaling bureau for a "special request" for log segments over 41-feet plus trim to be scaled under rules and guidelines as described above, and as found in R-6 Supplement No. 6 to FSH 2409.11, September 1978, U.S. Department of Agriculture - Forest Service.

Scaling. The Company Prior to removal from the Sale Area, Buyer shall supply scale sheets mark all logs with a distinctive brand of a character and in a manner mutually agreeable to employ- ees each pile on separate scale slipsBuyer and Seller. When a dispute over the scale arises, it All logs removed shall be dealt withscaled by the Official Rules. Buyer shall promptly make a written request to said Bureau for the Special Scale of logs described as Xxxxxxx-fir special cull logs and blocks, wormy cedar, white wood and Xxxxxxx-fir utility logs, in accordance with Official Rules of said Bureau and shall also request that all logs qualifying as Number-4 sawmill grade in the first instance General Scaling and Grading Rules of the Official Rules be scaled and reported so as to indicate the volume of logs which meet a minimum net of 20 board feet or more. Scaling shall be performed at such point or points as are determined by Seller. No logs shall be removed therefrom until scaling has been completed. The cost of scaling shall be borne by Xxxxx. Buyer shall arrange for and carry out a system of load tickets for reporting each load of logs trucked from the Sale Area. For each truckload removed, there shall be prepared at the point of loading, at least in triplicate, a serially numbered ticket showing for that particular truckload, its destination, the date, the number of logs of each species and the total number of logs. Additional data desired by Buyer may be added. The truck driver shall carry one copy, which shall be subject to examination by Seller, until the logs have been dumped or delivered, and one copy shall be made promptly available to Seller. Seller may at any time, at points agreed upon with Xxxxx, examine any truckload of logs from the Sale Area to check the branding and to compare the logs on the truck with truckload tickets. All costs of furnishing copies of all individual scale tickets and Bureau Certificates to the Seller’s representative will be borne by the Company Check Scaler, the employees involved and the Camp XxxxxxxBuyer. The check scale must be called for by the employees within fourteen calendar days after receiving the original scale slip and then must be completed and returned to the employees within fourteen calendar days after notifying their immediate supervisor. The maximum relative scaling variation is plus or minus Four Percent on stack scale and no adjustments will be made unless the variation exceeds plus or minus Four Percent in which case the actual pile as scaled will be adjusted accordingly to reflect the full difference. If no agreement is reached it shall be dealt with by the Chief Scaler, Union Business Agent or his appointee, the employees involved and a licensed Manitoba Scaler agreed upon by both parties. The tree length deck will be slashed or bucked into and lengths and will be cube-scaled by this licensed scaler. On the third and binding cube scale if it differs from the original scale by more than plus or minus Three Percent of the original scale, the original scale will be adjusted accordingly and the cost for the independent scaler will be charged to the party who was out of favour with the final and binding scale. In the event the Manitoba Scaling Manual is changed to provide for tree-length scaling this clause will be reviewed to reflect the change(s). A Committee will be formed consisting of the Wood- lands Manager, Business Agent of the Union, one employee representing the Company and one employee representing the to meet as required to review check scaling requests and procedures. Pieceworkers intending to quit shall give the Com- pany Xxxxxxx reasonable notice of leaving and the scalers shall scale him up within three days. Such time limit shall be exclusive of Sundays and holidays. It is understood the intent of this section is that the Company will endeavour Xxxxx agrees to have the pieceworkers final scale completed and the paid in accordance with the final scale prior Scaling Bureau make available to the worker leaving Seller’s representative the operationlog-truck-ticket-detail and weekly summary. ARTICLEBuyer will transmit such information to the Seller’s representative. Buyer will have the Scaling Bureau furnish directly to the Seller’s representative a copy of each scale certificate and detail sheet prepared by the Scaling Bureau showing gross and net scale for each species and grade of logs removed from the Sale Area during the period reported. All data transmitted by the Scaling Bureau to the Seller’s representative will be at Buyer’s expense. Logs bucked in lengths 41-feet plus trim and greater will be segment scaled, and diameter inside bark measurements will be obtained at both the small and large ends of each log. The scaling diameters of the lower segment or segments of split scaled logs shall be determined by apportioning the difference between inside bark diameters of the small and large ends. Buyer will make a written request to the appropriate scaling bureau for a "special request" for log segments over 41-feet plus trim to be scaled under rules and guidelines as described above, and as found in R-6 Supplement No. 6 to FSH 2409.11, September 1978, U.S. Department of Agriculture - Forest Service.

Scaling. The Company Prior to removal from the Sale Area, Buyer shall supply scale sheets xxxx all logs with a distinctive brand of a character and in a manner mutually agreeable to employ- ees each pile on separate scale slipsBuyer and Seller. When a dispute over the scale arises, it All logs removed shall be dealt withscaled by the Official Rules. Buyer shall promptly make a written request to said Bureau for the Special Scale of logs described as Xxxxxxx-fir special cull logs and blocks, wormy cedar, white wood and Xxxxxxx-fir utility logs, in accordance with Official Rules of said Bureau and shall also request that all logs qualifying as Number-4 sawmill grade in the first instance General Scaling and Grading Rules of the Official Rules be scaled and reported so as to indicate the volume of logs which meet a minimum net of 20 board feet or more. Scaling shall be performed at such point or points as are determined by Seller. No logs shall be removed therefrom until scaling has been completed. The cost of scaling shall be borne by Buyer. Buyer shall arrange for and carry out a system of load tickets for reporting each load of logs trucked from the Sale Area. For each truckload removed, there shall be prepared at the point of loading, at least in triplicate, a serially numbered ticket showing for that particular truckload, its destination, the date, the number of logs of each species and the total number of logs. Additional data desired by Buyer may be added. The truck driver shall carry one copy, which shall be subject to examination by Seller, until the logs have been dumped or delivered, and one copy shall be made promptly available to Seller. Seller may at any time, at points agreed upon with Buyer, examine any truckload of logs from the Sale Area to check the branding and to compare the logs on the truck with truckload tickets. All costs of furnishing copies of all individual scale tickets and Bureau Certificates to the Seller’s representative will be borne by the Company Check Scaler, the employees involved and the Camp XxxxxxxBuyer. The check scale must be called for by the employees within fourteen calendar days after receiving the original scale slip and then must be completed and returned to the employees within fourteen calendar days after notifying their immediate supervisor. The maximum relative scaling variation is plus or minus Four Percent on stack scale and no adjustments will be made unless the variation exceeds plus or minus Four Percent in which case the actual pile as scaled will be adjusted accordingly to reflect the full difference. If no agreement is reached it shall be dealt with by the Chief Scaler, Union Business Agent or his appointee, the employees involved and a licensed Manitoba Scaler agreed upon by both parties. The tree length deck will be slashed or bucked into and lengths and will be cube-scaled by this licensed scaler. On the third and binding cube scale if it differs from the original scale by more than plus or minus Three Percent of the original scale, the original scale will be adjusted accordingly and the cost for the independent scaler will be charged to the party who was out of favour with the final and binding scale. In the event the Manitoba Scaling Manual is changed to provide for tree-length scaling this clause will be reviewed to reflect the change(s). A Committee will be formed consisting of the Wood- lands Manager, Business Agent of the Union, one employee representing the Company and one employee representing the to meet as required to review check scaling requests and procedures. Pieceworkers intending to quit shall give the Com- pany Xxxxxxx reasonable notice of leaving and the scalers shall scale him up within three days. Such time limit shall be exclusive of Sundays and holidays. It is understood the intent of this section is that the Company will endeavour Buyer agrees to have the pieceworkers final scale completed and the paid in accordance with the final scale prior Scaling Bureau make available to the worker leaving Seller’s representative the operationlog-truck-ticket-detail and weekly summary. ARTICLEBuyer will transmit such information to the Seller’s representative. Buyer will have the Scaling Bureau furnish directly to the Seller’s representative a copy of each scale certificate and detail sheet prepared by the Scaling Bureau showing gross and net scale for each species and grade of logs removed from the Sale Area during the period reported. All data transmitted by the Scaling Bureau to the Seller’s representative will be at Buyer’s expense. Logs bucked in lengths 41-feet plus trim and greater will be segment scaled, and diameter inside bark measurements will be obtained at both the small and large ends of each log. The scaling diameters of the lower segment or segments of split scaled logs shall be determined by apportioning the difference between inside bark diameters of the small and large ends. Buyer will make a written request to the appropriate scaling bureau for a "special request" for log segments over 41-feet plus trim to be scaled under rules and guidelines as described above, and as found in R-6 Supplement No. 6 to FSH 2409.11, September 1978, U.S. Department of Agriculture - Forest Service.