RUBBER Sample Clauses
RUBBER. PPI Industry Data Code 32521, “Resin and Synthetic Rubber Manufacturing”, Database Series ID: PCU32521-32521;
RUBBER. 6.1 When rubber pipe covering is cut for any reason, the cut shall be made neatly so that when glued the edges will fit together without voids or irregularities.
6.2 All joints and seams are to be glued with an appropriate contact adhesive.
RUBBER. When rubber pipe covering is cut for any reason, the cut shall be made neatly so that when glued the edges will fit together without voids or irregularities.
RUBBER. Peru will eliminate tariffs on 71 percent of rubber and rubber product exports immediately upon implementation of the agreement. Tariffs on another 1 percent of exports will be eliminated over five years. Tariffs on the remaining 28 percent of U.S. rubber exports will be eliminated over ten years in Peru.
RUBBER. Furnishing rubber shall be the responsibility of the Employer. The Employer may require a deposit on all rubber issued to the Employee. Deposits on rubber are to be returned to the Employee when rubber is returned to the Employer.
RUBBER. Natural latex rubber (MM foam or its equivalent) of specified density and the thickness shall be used for all the cushions and padding for upholstered furniture. Loose cushions of all furniture should have solid foam ▇▇▇▇▇▇▇ to keep up proper shape.
RUBBER. The granulated rubber shall be vulcanized rubber product from the ambient temperature processing of scrap, pneumatic tires. The granulated rubber shall meet the following gradations: No substitutions will be accepted.
RUBBER. For purposes of this chapter, the term ‘‘rub- ber’’ includes synthetic and substitute rubber.
RUBBER a) The rubber thickness in the wear area must be 50mm, +/- 2mm.
b) The wearable height of the rubber part must have a minimum of 60mm.
c) The rubber must surround the ceramic inlays 100% except at the bottom surface.
