Revenue Metering. The Connecting Transmission Owner’s revenue metering will be located on the generator side of the 115kV breaker at the Xxxxx Solar Collector Substation and will consist of: • three (3) combination current/voltage transformer (“CT/VT”) units (manufacturer and model ABB/Xxxxxxx KXM-550, GE Grid Solutions KOTEF 000.XX, or other equivalent specified by Connecting Transmission Owner); and • one (1) revenue meter. The ratios of the CTs and VTs will be provided by Connecting Transmission Owner upon its review of the Interconnection Customer’s design documents. (Note: Connecting Transmission Owner’s revenue metering CTs and VTs cannot be used to feed the Interconnection Customer’s check meter.) SERVICE AGREEMENT NO. 2556
Revenue Metering. The revenue metering shall be located at the Xxxxxxx Road Collector Substation on the generator side of the breaker 52-1 in accordance with the Project Specific Specifications (as defined below) and Good Utility Practice, and shall consist of: • three (3) combination current/potential transformer (“CT/PT”) units (ABB/Xxxxxxx KXM-550, GE Grid Solutions KOTEF 000.XX, or other equivalent specified by Connecting Transmission Owner); and • one (1) revenue meter. (Note: Connecting Transmission Owner’s revenue metering CTs and PTs cannot be used to feed the Interconnection Customer’s check meter.)
Revenue Metering. Buyer shall own and Maintain all Revenue Meters, conduct meter accuracy and tolerance tests, and prepare all calibration reports required for equipment that measures energy transfers between Buyer and Seller. Said testing reports shall be in accordance with NYPP or ISO, as applicable, requirements, as amended from time to time, and any applicable State regulatory requirements, as amended from time to time. Seller shall have the opportunity to review and comment upon said reports prior to issuance. All Revenue Meters shall be sealed, and the seals shall be broken only by Buyer, upon occasions when the meters are to be inspected, tested or adjusted. The installations of any replacement metering required by Seller shall be at Seller's expense. Seller shall, at its own expense, Maintain and have the right to use a back-up metering system. The Parties agree that if the metering equipment and the Point of Interconnection are not at the same location electrically, the metering equipment shall be compensated to record the delivery of electricity in a manner that accounts for energy losses occurring between the metering point and the Point of Interconnection both when the generating unit is delivering energy to the Seller and when Seller is delivering energy to Buyer. If at any time, any primary metering equipment is found to be inaccurate by a margin of greater than that allowed under the applicable criteria, rules and standards, such metering equipment shall be made accurate or replaced at Buyer's expense. Meter readings for the period of inaccuracy shall be adjusted so far as the same can be reasonably ascertained based upon Seller's back-up metering system; provided, however, no adjustment shall be made prior to the point of time halfway between the time of the last successful test and the time the inaccuracy is corrected, except by agreement of the Parties. Each Party shall comply with any reasonable request of the other concerning the sealing of meters, the presence of a representative of the other Party when the seals are broken and tests are made, and other matters affecting the accuracy of the measurement of electricity delivered from each Purchased Asset. If either Party believes that there has been a meter inaccuracy, failure or stoppage, it shall immediately notify the other. The Parties shall each keep and maintain accurate and detailed records relating to the delivery of energy for a period of not less than six years. Such records shall be made availa...
Revenue Metering. Buyer shall own and Maintain all Revenue Meters, conduct meter accuracy and tolerance tests, and prepare all calibration reports required for equipment that measures energy transfers between Buyer and Seller. Said testing reports shall be in accordance with NYPP or ISO, as applicable, requirements, as amended from time to time, and any applicable State regulatory requirements, as amended from time to time. Seller shall have the opportunity to review and comment upon said reports prior to issuance. All Revenue Meters shall be sealed, and the seals shall be broken only by Buyer, upon occasions when the meters are to be inspected, tested or adjusted. The installations of any replacement metering required by Seller shall be at Seller's expense.
Revenue Metering. The Connecting Transmission Owner owned revenue metering shall be located at the Grissom Solar Collector Substation on the generator side of the 69kV breaker and shall consist of: three (3) combination current/voltage transformer (“CT/VT”) units (manufacturer and model shall be ABB/Kuhlman KXM-350 high accuracy, or other Connecting Transmission Owner specified equivalent); and one (1) revenue meter. (Note: Connecting Transmission Owner’s revenue metering CTs and VTs cannot be used to feed the Interconnection Customer’s check meter.)
Revenue Metering. The Connecting Transmission Owner’s revenue metering shall be located at the North Country Solar Collector Station on the generator side of the 48.3kV breaker in accordance with the requirements identified in the Project Specific Specifications, and shall consist of: • two (2) current transformers (“CTs”), GE type JKW-250ER; • two (2) voltage transformers (“VTs”), GE type JVT-250; and • one (1) revenue meter. (Note: The Connecting Transmission Owner’s revenue metering CTs and VTs cannot be used to feed the Interconnection Customer’s check meter.) The Interconnection Customer shall install a meter panel in accordance with the Project Specific Specifications and the Connecting Transmission Owner’s Electric System Bulletins (“ESBs”) 756A. The Connecting Transmission Owner will provide the CTs and VTs, and the Interconnection Customer shall mount them, make grounding connections, and complete all primary wiring. In addition, the Connecting Transmission Owner shall provide the meter socket enclosure for the Interconnection Customer to install near the Connecting Transmission Owner’s XXX.
Revenue Metering. Connecting Transmission Owner-owned revenue metering will be located on the generator side of the 34.5kV breaker at the Bakerstand Solar Collector Substation and will consist of: • two (2) current transformers, GE type JKW-7; SERVICE AGREEMENT NO. 2572 • two (2) potential transformers, GE type JVW-7; and • one (1) revenue meter. (Note: Connecting Transmission Owner’s revenue metering current transformers/voltage transformers (“CT/VTs”) cannot be used to feed the Interconnection Customer’s check meter).
Revenue Metering. The Connecting Transmission Owner owned revenue metering shall be located at the Xxxxx Solar Collector Substation on the generator side of the 69kV breaker and shall consist of:
Revenue Metering. I. Generator shall install special Energy Meters (ABT) with 15 min block with online reading features and maintain all facilities necessary to accommodate metering including all revenue meters, metering transformers and metering devices. Generator shall provide suitable space for such facilities. Meters shall be capable of bi-directional registration so that deliveries to and from Generator’s equipment can be separately recorded. MSEDCL shall provide Generator the design specifications for their equipment and metering room. All meter installations shall employ appropriate test blocks for calibration purposes. The metering equipment shall be sealed and the seals shall be broken only upon occasions when the meters are to be inspected, tested or adjusted, and representatives of Generator shall be accorded reasonable opportunity to be present upon such occasions. The Operating Committee will develop protocols of notices for this purpose. The location of revenue metering equipment shall be in Generator’s HV side of substation. Generator shall furnish, install and maintain all wiring and miscellaneous equipment for revenue meters, metering transformers. This shall be done in accordance with MSEDCL supplied drawings, specifications and procedures. Meters and protective devices installed by Generator for their use shall not be connected to secondary of MSEDCL’s current or potential transformers.
Revenue Metering. Revenue metering will be located on the generator side of the 115kV breaker at the ELP Stillwater Collector Substation and will consist of: • three (3) combination current/voltage transformer (“CT/VT”) units (manufacturer and model ABB/Xxxxxxx KXM-550, GE Grid Solutions KOTEF 000.XX, or other equivalent specified by Connecting Transmission Owner); and • one (1) revenue meter. The ratios of the CTs and VTs will be provided by Connecting Transmission Owner upon review of the Interconnection Customer’s design documents in accordance with Section D of Attachment 2 of the Agreement. (Note: Connecting Transmission Owner’s revenue metering CTs and VTs cannot be used to feed the Interconnection Customer’s check meter.) The metering of any redundant or standby station service provisions at the ELP Stillwater Solar Collector Substation Collector shall be added in accordance with Connecting Transmission Owner’s retail tariff, PSC No. 220 and Connecting Transmission Owner’s ESB 750.
