Resin Clause Samples
POPULAR SAMPLE Copied 1 times
Resin. For purposes of this Agreement, Resin shall include any jettable fluid that may be used by LICENSEE with the Printhead.
Resin two part epoxy resin system, low viscosity, high modulus, moisture insensitive, U.V. stable (non-yellowing).
Resin. THE RESIN SYSTEM SHALL CONSIST OF A TWO-PART EPOXY RESIN THAT WHEN CURED WILL CONFORM TO THE ASTM F1216-05 PHYSICAL PROPERTIES. THE RESIN SHALL MEET THE ASTM F1216- 05 CHEMICAL RESISTANCE REQUIREMENTS. ALL TESTING IS TO BE PERFORMED BY A THIRD PARTY TESTING LABORATORY. THE RESIN, WHEN CURED, SHALL BE CONSISTENT WITH THE FELT LINER AND CONFORM TO THE EXISTING PIPE WITH GAPS, VOIDS, AND/OR ANNULAR SPACE. THE FINISHED CURED IN PLACE LINER SHALL BE WATER TIGHT AND PASS A 31B AIR TEST AT THREE (3) MINUTES MINIMUM. POLYESTER, VINYLESTER RESINS WHICH PRODUCE SHRINKAGE AND UV CURED SYSTEMS WILL NOT BE ACCEPTED.