Common use of Products Clause in Contracts

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below by the dates listed in the Project Schedule (Part V). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of the product is required. With respect to due dates within this Scope of Work, “days” means working days. The Recipient shall: For products that require a draft version, including the Final Report Outline and Final Report • Submit all draft products to the CAM for review and comment in accordance with the Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • Consider incorporating all CAM comments into the final product. If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into the final product. • Submit the revised product and responses to comments within 10 days of notice by the CAM, unless the CAM specifies a longer time period, or approves a request for additional time. For products that require a final version only • Submit the product to the CAM for acceptance. The CAM may request minor revisions or explanations prior to acceptance. For all products • Submit all data and documents required as products in accordance with the following: Instructions for Submitting Electronic Files and Developing Software: o Electronic File Format  Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the Energy Commission’s software and Microsoft (MS)-operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROM. The following describes the accepted formats for electronic data and documents provided to the Energy Commission as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:  Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.  Text documents will be in MS Word file format, version 2007 or later.  Documents intended for public distribution will be in PDF file format.  The Recipient must also provide the native Microsoft file format.  Project management documents will be in Microsoft Project file format, version 2007 or later.

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below by the dates listed in the Project Schedule (Part V). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of the product is required. With respect to due dates within this Scope of Work, “days” means working days. The Recipient shall: For products that require a draft version, including the Final Report Outline and Final Report • Submit all draft products to the CAM for review and comment in accordance with the Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • Consider incorporating all CAM comments into the final product. If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into the final product. • Submit the revised product and responses to comments within 10 days of notice by the CAM, unless the CAM specifies a longer time period, or approves a request for additional time. For products that require a final version only • Submit the product to the CAM for acceptance. The CAM may request minor revisions or explanations prior to acceptance. For all products • Submit all data and documents required as products in accordance with the following: following Instructions for Submitting Electronic Files and Developing Software: o Electronic File Format  Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the Energy Commission’s software and Microsoft (MS)-operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROM. The following describes the accepted formats for electronic data and documents provided to the Energy Commission as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:  Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.  Text documents will be in MS Word file format, version 2007 or later.  Documents intended for public distribution will be in PDF file format.  The Recipient must also provide the native Microsoft file format.  Project management documents will be in Microsoft Project file format, version 2007 or later.:

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below by the dates listed in the Project Schedule (Part V). All products submitted which will be viewed by the public, must comply with the accessibility requirements of Section 508 of the federal Rehabilitation Act of 1973, as amended (29 U.S.C. Sec. 794d), and regulations implementing that act as set forth in Part 1194 of Title 36 of the Federal Code of Regulations. All technical tasks should include product(s). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of the product is required. With respect to due dates within this Scope of Work, “days” means working days. The Recipient shall: For products that require a draft version, including the Final Report Outline and Final Report • Submit all draft products to the CAM for review and comment in accordance with the Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • Consider incorporating all CAM comments into the final product. If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into the final product. • Submit the revised product and responses to comments within 10 days of notice by the CAM, unless the CAM specifies a longer time period, or approves a request for additional time. For products that require a final version only • Submit the product to the CAM for acceptance. The CAM may request minor revisions or explanations prior to acceptance. For all products • Submit all data and documents required as products in accordance with the following: Instructions for Submitting Electronic Files and Developing Software: o Electronic File Format  Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the California Energy Commission’s (CEC) software and Microsoft (MS)-operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROMstick. The following describes the accepted formats for electronic data and documents provided to the Energy Commission CEC as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:  Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.  Text documents will be in MS Word file format, version 2007 or later.  Documents intended for public distribution will be in PDF file format.  The Recipient must also provide the native Microsoft file format.  Project management documents will be in Microsoft Project file format, version 2007 or later.

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below by the dates listed in the Project Schedule (Part V). All products submitted which will be viewed by the public, must comply with the accessibility requirements of Section 508 of the federal Rehabilitation Act of 1973, as amended (29 U.S.C. Sec. 794d), and regulations implementing that act as set forth in Part 1194 of Title 36 of the Federal Code of Regulations. All technical tasks should include product(s). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of the product is required. With respect to due dates within this Scope of Work, “days” means working days. The Recipient shall: For products that require a draft version, including the Final Report Outline and Final Report • Submit all draft products to the CAM for review and comment in accordance with the Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • Consider incorporating all CAM comments into the final product. If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into the final product. • Submit the revised product and responses to comments within 10 days of notice by the CAM, unless the CAM specifies a longer time period, or approves a request for additional time. For products that require a final version only • Submit the product to the CAM for acceptance. The CAM may request minor revisions or explanations prior to acceptance. For all products • Submit all data and documents required as products in accordance with the following: Instructions for Submitting Electronic Files and Developing Software: o Electronic File Format  ▪ Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the California Energy Commission’s (CEC) software and Microsoft (MS)-operating MS)- operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROMstick. The following describes the accepted formats for electronic data and documents provided to the Energy Commission CEC as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:  ▪ Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.  ▪ Text documents will be in MS Word file format, version 2007 or later.  Documents intended for public distribution will be in PDF file format.  The Recipient must also provide the native Microsoft file format.  ▪ Project management documents will be in Microsoft Project file format, version 2007 or later.

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below by the dates listed in the Project Schedule (Part V). All products submitted which will be viewed by the public, must comply with the accessibility requirements of Section 508 of the federal Rehabilitation Act of 1973, as amended (29 U.S.C. Sec. 794d), and regulations implementing that act as set forth in Part 1194 of Title 36 of the Federal Code of Regulations. All technical tasks should include product(s). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of the product is required. With respect to due dates within this Scope of Work, “days” means working days. The Recipient shall: For products that require a draft version, including the Final Report Outline and Final Report • Submit all draft products to the CAM for review and comment in accordance with the Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • Consider incorporating all CAM comments into the final product. If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into the final product. • Submit the revised product and responses to comments within 10 days of notice by the CAM, unless the CAM specifies a longer time period, or approves a request for additional time. For products that require a final version only • Submit the product to the CAM for acceptance. The CAM may request minor revisions or explanations prior to acceptance. For all products • Submit all data and documents required as products in accordance with the following: Instructions for Submitting Electronic Files and Developing Software: o Electronic File Format  ▪ Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the California Energy Commission’s (CEC) software and Microsoft (MS)-operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROMstick. The following describes the accepted formats for electronic data and documents provided to the Energy Commission CEC as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:  ▪ Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.  ▪ Text documents will be in MS Word file format, version 2007 or later.  Documents intended for public distribution will be in PDF file format.  The Recipient must also provide the native Microsoft file format.  ▪ Project management documents will be in Microsoft Project file format, version 2007 or later.

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below by the dates listed in the Project Schedule (Part V). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of the product is required. With respect to due dates within this Scope of Work, “days” means working days. The Recipient shall: For products that require a draft version, including the Final Report Outline and Final Report version • Submit all draft products to the CAM for review and comment in accordance with the Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • Consider incorporating all CAM comments into Submit the final productproduct to the CAM once agreement has been reached on the draft. The CAM will provide written approval of the final product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into CAM determines that the final product. • Submit product does not sufficiently incorporate his/her comments, submit the revised product and responses to comments the CAM within 10 days of notice by the CAM, unless the CAM specifies a longer time period, or approves a request for additional time. For products that require a final version only • Submit the product to the CAM for acceptanceapproval. The • If the CAM may request minor revisions or explanations prior determines that the product requires revision, submit the revised product to acceptancethe CAM within 10 days of notice by the CAM, unless the CAM specifies a longer time period. For all products • Submit all data and documents required as products in accordance with the following: following Instructions for Submitting Electronic Files and Developing Software: o Electronic File Format  Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the Energy Commission’s software and Microsoft (MS)-operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROM. The following describes the accepted formats for electronic data and documents provided to the Energy Commission as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:  Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.  Text documents will be in MS Word file format, version 2007 or later.  Documents intended for public distribution will be in PDF file format.  The Recipient must also provide the native Microsoft file format.  Project management documents will be in Microsoft Project file format, version 2007 or later.:

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below by the dates listed in the Project Schedule (Part V). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of the product is required. With respect to due dates within this Scope of Work, “days” means working days. The Recipient shall: For products that require a draft version, including the Final Report Outline and Final Report • ● Submit all draft products to the CAM for review and comment in accordance with the Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • ● Consider incorporating all CAM comments into the final product. If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into the final product. • ● Submit the revised product and responses to comments within 10 days of notice by the CAM, unless the CAM specifies a longer time period, or approves a request for additional time. For products that require a final version only • ● Submit the product to the CAM for acceptance. The CAM may request minor revisions or explanations prior to acceptance. For all products • ● Submit all data and documents required as products in accordance with the following: following Instructions for Submitting Electronic Files and Developing Software: o Electronic File Format  Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the Energy Commission’s software and Microsoft (MS)-operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROM. The following describes the accepted formats for electronic data and documents provided to the Energy Commission as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:  Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.  Text documents will be in MS Word file format, version 2007 or later.  Documents intended for public distribution will be in PDF file format.  The Recipient must also provide the native Microsoft file format.  Project management documents will be in Microsoft Project file format, version 2007 or later.:

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below by the dates listed in the Project Schedule (Part V). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of the product is required. With respect to due dates within this Scope of Work, “days” means working days. The Recipient shall: For products that require a draft version, including the Final Report Outline and Final Report • Submit all draft products to the CAM for review and comment in accordance with the Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • Consider incorporating all CAM comments into the final product. If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into the final product. • Submit the revised product and responses to comments within 10 days of notice by the CAM, unless the CAM specifies a longer time period, or approves a request for additional time. For products that require a final version only • Submit the product to the CAM for acceptance. The CAM may request minor revisions or explanations prior to acceptance. For all products • Submit all data and documents required as products in accordance with the following: Instructions for Submitting Electronic Files and Developing Software: o Electronic File Format  Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the Energy Commission’s software and Microsoft (MS)-operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROM. The following describes the accepted formats for electronic data and documents provided to the Energy Commission as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:  Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.  Text documents will be in MS Word file format, version 2007 or later.  Documents intended for public distribution will be in PDF file format.  The Recipient must also provide the native Microsoft file format.  Project management documents will be in Microsoft Project file format, version 2007 or later.Microsoft

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below by the dates listed in the Project Schedule (Part V). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of the product is required. With respect to due dates within this Scope of Work, “days” means working days. The Recipient shall: For products that require a draft version, including the Final Report Outline and Final Report • ● Submit all draft products to the CAM for review and comment in accordance with the Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • ● Consider incorporating all CAM comments into the final product. If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into the final product. • ● Submit the revised product and responses to comments within 10 days of notice by the CAM, unless the CAM specifies a longer time period, or approves a request for additional time. For products that require a final version only • ● Submit the product to the CAM for acceptance. The CAM may request minor revisions or explanations prior to acceptance. For all products • ● Submit all data and documents required as products in accordance with the following: Instructions for Submitting Electronic Files and Developing Software: o Electronic File Format  ▪ Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the Energy Commission’s software and Microsoft (MS)-operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text ▪ Text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROM. The following describes the accepted formats for electronic data and documents provided to the Energy Commission as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:  ▪ Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.  ▪ Text documents will be in MS Word file format, version 2007 or later.  ▪ Documents intended for public distribution will be in PDF file format.  ▪ The Recipient must also provide the native Microsoft file format.  ▪ Project management documents will be in Microsoft Project file format, version 2007 or later.

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below by the dates listed in the Project Schedule (Part V). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of the product is required. With respect to due dates within this Scope of Work, “days” means working days. The Recipient shall: For products that require a draft version, including the Final Report Outline and Final Report • Submit all draft products to the CAM for review and comment in accordance with the Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • Consider incorporating all CAM comments into the final product. If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into the final product. • Submit the revised product and responses to comments within 10 days of notice by the CAM, unless the CAM specifies a longer time period, or approves a request for additional time. For products that require a final version only • Submit the product to the CAM for acceptance. The CAM may request minor revisions or explanations prior to acceptance. For all products • Submit all data and documents required as products in accordance with the following: Instructions for Submitting Electronic Files and Developing Software: o Electronic File Format  Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the Energy Commission’s software and Microsoft (MS)-operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROM. The following describes the accepted formats for electronic data and documents provided to the Energy Commission as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:  Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.  Text documents will be in MS Word file format, version 2007 or later.  Documents intended for public distribution will be in PDF file format.  The Recipient must also provide the native Microsoft file format.  Project management documents will be in Microsoft Project file format, version 2007 or later.

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below by the dates listed in the Project Schedule (Part V). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of the product is required. With respect to due dates within this Scope of Work, “days” means working days. The Recipient shall: For products that require a draft version, including the Final Report Outline and Final Report • version  Submit all draft products to the CAM for review and comment in accordance with the Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • Consider incorporating all CAM comments into  Submit the final productproduct to the CAM once agreement has been reached on the draft. The CAM will provide written approval of the final product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required.  If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into CAM determines that the final product. • Submit product does not sufficiently incorporate his/her comments, submit the revised product and responses to comments the CAM within 10 days of notice by the CAM, unless the CAM specifies a longer time period, or approves a request for additional time. For products that require a final version only •  Submit the product to the CAM for acceptanceapproval. The  If the CAM may request minor revisions or explanations prior determines that the product requires revision, submit the revised product to acceptancethe CAM within 10 days of notice by the CAM, unless the CAM specifies a longer time period. For all products •  Submit all data and documents required as products in accordance with the following: following Instructions for Submitting Electronic Files and Developing Software: o  Electronic File Format  Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the Energy Commission’s software and Microsoft (MS)-operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROM. The following describes the accepted formats for electronic data and documents provided to the Energy Commission as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:   Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.   Text documents will be in MS Word file format, version 2007 or later.   Documents intended for public distribution will be in PDF file format.  The Recipient must also provide the native Microsoft file format.   Project management documents will be in Microsoft Project file format, version 2007 or later.

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below by the dates listed in the Project Schedule (Part V). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of the product is required. With respect to due dates within this Scope of Work, “days” means working days. The Recipient shall: For products that require a draft version, including the Final Report Outline and Final Report • Submit all draft products to the CAM for review and comment in accordance with the Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • Consider incorporating all CAM comments into the final product. If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into the final product. • Submit the revised product and responses to comments within 10 days of notice by the CAM, unless the CAM specifies a longer time period, or approves a request for additional time. For products that require a final version only • Submit the product to the CAM for acceptance. The CAM may request minor revisions or explanations prior to acceptance. For all products • Submit all data and documents required as products in accordance with the following: Instructions for Submitting Electronic Files and Developing Software: o Electronic File Format  ▪ Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the Energy Commission’s software and Microsoft (MS)-operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROM. The following describes the accepted formats for electronic data and documents provided to the Energy Commission as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:  ▪ Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.  ▪ Text documents will be in MS Word file format, version 2007 or later.  ▪ Documents intended for public distribution will be in PDF file format.  ▪ The Recipient must also provide the native Microsoft file format.  ▪ Project management documents will be in Microsoft Project file format, version 2007 or later.

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below by the dates listed in the Project Schedule (Part V). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of the product is required. With respect to due dates within this Scope of Work, “days” means working days. The Recipient shall: For products that require a draft version, including the Final Report Outline and Final Report • Submit all draft products to the CAM for review and comment in accordance with the Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • Consider incorporating all CAM comments into the final product. If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into the final product. • Submit the revised product and responses to comments within 10 days of notice by the CAM, unless the CAM specifies a longer time period, or approves a request for additional time. For products that require a final version only • Submit the product to the CAM for acceptance. The CAM may request minor revisions or explanations prior to acceptance. For all products • Submit all data and documents required as products in accordance with the following: Instructions for Submitting Electronic Files and Developing Software: o Electronic File Format  Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the Energy Commission’s software and Microsoft (MS)-operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text  Text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROM. The following describes the accepted formats for electronic data and documents provided to the Energy Commission as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:  Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.  Text documents will be in MS Word file format, version 2007 or later.  Documents intended for public distribution will be in PDF file format.  The Recipient must also provide the native Microsoft file format.  Project management documents will be in Microsoft Project file format, version 2007 or later.

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below by the dates listed in the Project Schedule (Part V). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of the product is required. With respect to due dates within this Scope of Work, “days” means working days. The Recipient shall: For products that require a draft version, including the Final Report Outline and Final Report version • Submit all draft products to the CAM for review and comment in accordance with the Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • Consider incorporating all CAM comments into the final product. If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into the final product. • Submit the revised product and responses to comments within 10 days of notice by the CAM, unless the CAM specifies a longer time period, or approves a request for additional time. For products that require a final version only • Submit the product to the CAM for acceptance. The CAM may request minor revisions or explanations prior to acceptance. For all products • Submit all data and documents required as products in accordance with the following: following Instructions for Submitting Electronic Files and Developing Software: o • Electronic File Format  Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the Energy Commission’s software and Microsoft (MS)-operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROM. The following describes the accepted formats for electronic data and documents provided to the Energy Commission as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:  • Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.  • Text documents will be in MS Word file format, version 2007 or later.  • Documents intended for public distribution will be in PDF file format.  • The Recipient must also provide the native Microsoft file format.  • Project management documents will be in Microsoft Project file format, version 2007 or later. • Software Application Development Use the following standard Application Architecture components in compatible versions for any software application development required by this Agreement (e.g., databases, models, modeling tools), unless the CAM approves other software applications such as open source programs: • Microsoft XXX.XXX framework (version 3.5 and up). Recommend 4.0. • Microsoft Internet Information Services (IIS), (version 6 and up) recommend 7.5. • Visual Xxxxxx.XXX (version 2008 and up). Recommend 2010. • C# Programming Language with Presentation (UI), Business Object and Data Layers. • SQL (Structured Query Language). • Microsoft SQL Server 2008, Stored Procedures. Recommend 2008 R2. • Microsoft SQL Reporting Services. Recommend 2008 R2. • XML (external interfaces). Any exceptions to the Electronic File Format requirements above must be approved in writing by the CAM. The CAM will consult with the Energy Commission’s Information Technology Services Branch to determine whether the exceptions are allowable.

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below by the dates listed in the Project Schedule (Part V). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of the product is required. With respect to due dates within this Scope of Work, “days” means working days. The Recipient shall: For products that require a draft version, including the Final Report Outline and Final Report • Submit all draft products to the CAM for review and comment in accordance with the Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • Consider incorporating all CAM comments into the final product. If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into the final product. • Submit the revised product and responses to comments within 10 days of notice by the CAM, unless the CAM specifies a longer time period, or approves a request for additional time. For products that require a final version only • Submit the product to the CAM for acceptance. The CAM may request minor revisions or explanations prior to acceptance. For all products • Submit all data and documents required as products in accordance with the following: Instructions for Submitting Electronic Files and Developing Software: o • Electronic File Format  Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the Energy Commission’s software and Microsoft (MS)-operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROM. The following describes the accepted formats for electronic data and documents provided to the Energy Commission as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:  o Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.  o Text documents will be in MS Word file format, version 2007 or later.  o Documents intended for public distribution will be in PDF file format.  • The Recipient must also provide the native Microsoft file format.  o Project management documents will be in Microsoft Project file format, version 2007 or later. • Software Application Development Use the following standard Application Architecture components in compatible versions for any software application development required by this Agreement (e.g., databases, models, modeling tools), unless the CAM approves other software applications such as open source programs: o Microsoft XXX.XXX framework (version 3.5 and up). Recommend 4.0. o Microsoft Internet Information Services (IIS), (version 6 and up) Recommend 7.5. o Visual Xxxxxx.XXX (version 2008 and up). Recommend 2010.

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below by the dates listed in the Project Schedule (Part V). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of the product is required. With respect to due dates within this Scope of Work, “days” means working days. The Recipient shall: For products that require a draft version, including the Final Report Outline and Final Report • Submit all draft products to the CAM for review and comment in accordance with the Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • Consider incorporating all CAM comments into the final product. If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into the final product. • Submit the revised product and responses to comments within 10 days of notice by the CAM, unless the CAM specifies a longer time periodtime, or approves a request for additional time. For products that require a final version only • Submit the product to the CAM for acceptance. The CAM may request minor revisions or explanations prior to acceptance. For all products • Submit all data and documents required as products in accordance with the following: following Instructions for Submitting Electronic Files and Developing Software: o Electronic File Format  Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the Energy Commission’s software and Microsoft (MS)-operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROM. The following describes the accepted formats for electronic data and documents provided to the Energy Commission as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:  Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.  Text documents will be in MS Word file format, version 2007 or later.  Documents intended for public distribution will be in PDF file format.  The Recipient must also provide the native Microsoft file format.  Project management documents will be in Microsoft Project file format, version 2007 or later.:

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below by the dates listed in the Project Schedule (Part V). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of the product is required. With respect to due dates within this Scope of Work, “days” means working days. The Recipient shall: For products that require a draft version, including the Final Report Outline and Final Report version • Submit all draft products to the CAM for review and comment in accordance with the Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • Consider incorporating all CAM comments into Submit the final productproduct to the CAM once agreement has been reached on the draft. The CAM will provide written approval of the final product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into CAM determines that the final product. • Submit product does not sufficiently incorporate his/her comments, submit the revised product and responses to comments the CAM within 10 days of notice by the CAM, unless the CAM specifies a longer time period, or approves a request for additional time. For products that require a final version only • Submit the product to the CAM for acceptanceapproval. The • If the CAM may request minor revisions or explanations prior determines that the product requires revision, submit the revised product to acceptancethe CAM within 10 days of notice by the CAM, unless the CAM specifies a longer time period. For all products • Submit all data and documents required as products in accordance with the following: following Instructions for Submitting Electronic Files and Developing Software: o • Electronic File Format  Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the Energy Commission’s software and Microsoft (MS)-operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROM. The following describes the accepted formats for electronic data and documents provided to the Energy Commission as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:  • Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.  • Text documents will be in MS Word file format, version 2007 or later.  • Documents intended for public distribution will be in PDF file format.  The Recipient must also provide the native Microsoft file format.  • Project management documents will be in Microsoft Project file format, version 2007 or later.

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below by the dates listed in the Project Schedule (Part V). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of the product is required. With respect to due dates within this Scope of Work, “days” means working days. The Recipient shall: For products that require a draft version, including the Final Report Outline and Final Report • Submit all draft products to the CAM for review and comment in accordance with the 4 S&P Global. “As Calif. Solar records fall, curtailments of renewables rise.” March 2019. xxxxx://xxxxxxxx.xx.xxxxxxxx.xxx/web/client?auth=inherit#news/article?id=50621600&KeyProductLinkType =23 Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • Consider incorporating all CAM comments into the final product. If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into the final product. • Submit the revised product and responses to comments within 10 days of notice by the CAM, unless the CAM specifies a longer time period, or approves a request for additional time. For products that require a final version only • Submit the product to the CAM for acceptance. The CAM may request minor revisions or explanations prior to acceptance. For all products • Submit all data and documents required as products in accordance with the following: Instructions for Submitting Electronic Files and Developing Software: o Electronic File Format  Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the Energy Commission’s software and Microsoft (MS)-operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROM. The following describes the accepted formats for electronic data and documents provided to the Energy Commission as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:  Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.  Text documents will be in MS Word file format, version 2007 or later.  Documents intended for public distribution will be in PDF file format.  The Recipient must also provide the native Microsoft file format.  Project management documents will be in Microsoft Project file format, version 2007 or later.

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below by the dates listed in the Project Schedule (Part V). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of 3 California Public Resources Code, Section 25711.5(a) also requires EPIC-funded projects to lead to technological advancement and breakthroughs to overcome barriers that prevent the achievement of the state’s statutory and energy goals. the product is required. With respect to due dates within this Scope of Work, “days” means working days. The Recipient shall: For products that require a draft version, including the Final Report Outline and Final Report • Submit all draft products to the CAM for review and comment in accordance with the Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • Consider incorporating all CAM comments into the final product. If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into the final product. • Submit the revised product and responses to comments within 10 days of notice by the CAM, unless the CAM specifies a longer time period, or approves a request for additional time. For products that require a final version only • Submit the product to the CAM for acceptance. The CAM may request minor revisions or explanations prior to acceptance. For all products • Submit all data and documents required as products in accordance with the following: Instructions for Submitting Electronic Files and Developing Software: o Electronic File Format  Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the Energy Commission’s software and Microsoft (MS)-operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text  Text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROM. The following describes the accepted formats for electronic data and documents provided to the Energy Commission as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:  Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.  Text documents will be in MS Word file format, version 2007 or later.  Documents intended for public distribution will be in PDF file format.  The Recipient must also provide the native Microsoft file format.  Project management documents will be in Microsoft Project file format, version 2007 or later.

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below by the dates listed in the Project Schedule (Part V). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of the product is required. With respect to due dates within this Scope of Work, “days” means working days. The Recipient shall: increased safety (See CPUC “Phase 2” Decision 00-00-000 at page 19, May 24, 2012, xxxx://xxxx.xxxx.xx.xxx/PublishedDocs/WORD_PDF/FINAL_DECISION/167664.PDF). 3 California Public Resources Code, Section 25711.5(a) also requires EPIC-funded projects to lead to technological advancement and breakthroughs to overcome barriers that prevent the achievement of the state’s statutory and energy goals. For products that require a draft version, including the Final Report Outline and Final Report • Submit all draft products to the CAM for review and comment in accordance with the Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • Consider incorporating all CAM comments into the final product. If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into the final product. • Submit the revised product and responses to comments within 10 days of notice by the CAM, unless the CAM specifies a longer time period, or approves a request for additional time. For products that require a final version only • Submit the product to the CAM for acceptance. The CAM may request minor revisions or explanations prior to acceptance. For all products • Submit all data and documents required as products in accordance with the following: Instructions for Submitting Electronic Files and Developing Software: o Electronic File Format  Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the Energy Commission’s software and Microsoft (MS)-operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROM. The following describes the accepted formats for electronic data and documents provided to the Energy Commission as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:  Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.  Text documents will be in MS Word file format, version 2007 or later.  Documents intended for public distribution will be in PDF file format.  The Recipient must also provide the native Microsoft file format.  Project management documents will be in Microsoft Project file format, version 2007 or later.

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below by the dates listed in the Project Schedule (Part V). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of the product is required. With respect to due dates within this Scope of Work, “days” means working days. The Recipient shall: For products that require a draft version, including the Final Report Outline and Final Report version • Submit all draft products to the CAM for review and comment in accordance with the Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • Consider incorporating all CAM comments into the final product. If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into the final product. • Submit the revised product and responses to comments within 10 days of notice by the CAM, unless the CAM specifies a longer time period, or approves a request for additional time. For products that require a final version only • Submit the product to the CAM for acceptance. The CAM may request minor revisions or explanations prior to acceptance. For all products • Submit all data and documents required as products in accordance with the following: following Instructions for Submitting Electronic Files and Developing Software: o Electronic File Format  Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the Energy Commission’s software and Microsoft (MS)-operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROM. The following describes the accepted formats for electronic data and documents provided to the Energy Commission as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:  Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.  Text documents will be in MS Word file format, version 2007 or later.  Documents intended for public distribution will be in PDF file format.  The Recipient must also provide the native Microsoft file format.  Project management documents will be in Microsoft Project file format, version 2007 or later.:

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below by the dates listed in the Project Schedule (Part V). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of the product is required. With respect to due dates within this Scope of Work, “days” means working days. days The Recipient shall: For products that require a draft version, including the Final Report Outline and Final Report • Submit all draft products to the CAM for review and comment in accordance with the Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • Consider incorporating all CAM comments into the final product. If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into the final product. • Submit the revised product and responses to comments within 10 days of notice by the CAM, unless the CAM specifies a longer time period, or approves a request for additional time. For products that require a final version only • Submit the product to the CAM for acceptance. The CAM may request minor revisions or explanations prior to acceptance. For all products • Submit all data and documents required as products in accordance with the following: Instructions for Submitting Electronic Files and Developing Software: o Electronic File Format  Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the Energy Commission’s software and Microsoft (MS)-operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROM. The following describes the accepted formats for electronic data and documents provided to the Energy Commission as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:  Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.  Text documents will be in MS Word file format, version 2007 or later.  Documents intended for public distribution will be in PDF file format.  The Recipient must also provide the native Microsoft file format.  Project management documents will be in Microsoft Project file format, version 2007 or later.

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below 3 California Public Resources Code, Section 25711.5(a) also requires EPIC-funded projects to lead to technological advancement and breakthroughs to overcome barriers that prevent the achievement of the state’s statutory and energy goals. by the dates listed in the Project Schedule (Part V). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of the product is required. With respect to due dates within this Scope of Work, “days” means working days. The Recipient shall: For products that require a draft version, including the Final Report Outline and Final Report • Submit all draft products to the CAM for review and comment in accordance with the Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • Consider incorporating all CAM comments into the final product. If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into the final product. • Submit the revised product and responses to comments within 10 days of notice by the CAM, unless the CAM specifies a longer time period, or approves a request for additional time. For products that require a final version only • Submit the product to the CAM for acceptance. The CAM may request minor revisions or explanations prior to acceptance. For all products • Submit all data and documents required as products in accordance with the following: following Instructions for Submitting Electronic Files and Developing Software: o Electronic File Format  Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the Energy Commission’s software and Microsoft (MS)-operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROM. The following describes the accepted formats for electronic data and documents provided to the Energy Commission as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:  Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.  Text documents will be in MS Word file format, version 2007 or later.  Documents intended for public distribution will be in PDF file format.  The Recipient must also provide the native Microsoft file format.  Project management documents will be in Microsoft Project file format, version 2007 or later.:

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below by the dates listed in the Project Schedule (Part V). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of the product is required. With respect to due dates within this Scope of Work, “days” means working days. The Recipient shall: For products that require a draft version, including the Final Report Outline and Final Report version • Submit all draft products to the CAM for review and comment in accordance with the Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • Consider incorporating all CAM comments into Submit the final productproduct to the CAM once agreement has been reached on the draft. The CAM will provide written approval of the final product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into CAM determines that the final product. • Submit product does not sufficiently incorporate his/her comments, submit the revised product and responses to comments the CAM within 10 days of notice by the CAM, unless the CAM specifies a longer time period, or approves a request for additional time. For products that require a final version only • Submit the product to the CAM for acceptanceapproval. The • If the CAM may request minor revisions or explanations prior determines that the product requires revision, submit the revised product to acceptancethe CAM within 10 days of notice by the CAM, unless the CAM specifies a longer time period. For all products • Submit all data and documents required as products in accordance with the following: following Instructions for Submitting Electronic Files and Developing Software: o Electronic File Format  Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the Energy Commission’s software and Microsoft (MS)-operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROM. The following describes the accepted formats for electronic data and documents provided to the Energy Commission as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:  Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.  Text documents will be in MS Word file format, version 2007 or later.  Documents intended for public distribution will be in PDF file format.  The Recipient must also provide the native Microsoft file format.  Project management documents will be in Microsoft Project file format, version 2007 or later.  Software Application Development Use the following standard Application Architecture components in compatible versions for any software application development required by this Agreement (e.g., databases, models, modeling tools), unless the CAM approves other software applications such as open source programs:  Microsoft XXX.XXX framework (version 3.5 and up). Recommend 4.0.  Microsoft Internet Information Services (IIS), (version 6 and up) Recommend 7.5.  Visual Xxxxxx.XXX (version 2008 and up). Recommend 2010.  C# Programming Language with Presentation (UI), Business Object and Data Layers.  SQL (Structured Query Language).  Microsoft SQL Server 2008, Stored Procedures. Recommend 2008 R2.  Microsoft SQL Reporting Services. Recommend 2008 R2.  XML (external interfaces). Any exceptions to the Electronic File Format requirements above must be approved in writing by the CAM. The CAM will consult with the Energy Commission’s Information Technology Services Branch to determine whether the exceptions are allowable.

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below by the dates listed in the Project Schedule (Part V). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of the product is required. With respect to due dates within this Scope of Work, “days” means working days. The Recipient shall: For products that require a draft version, including the Final Report Outline and Final Report • Submit all draft products to the CAM for review and comment in accordance with the Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • Consider incorporating all CAM comments into the final product. If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into the final product. • Submit the revised product and responses to comments within 10 days of notice by the CAM, unless the CAM specifies a longer time period, or approves a request for additional time. For products that require a final version only • Submit the product to the CAM for acceptance. The CAM may request minor revisions or explanations prior to acceptance. For all products • Submit all data and documents required as products in accordance with the following: Instructions for Submitting Electronic Files and Developing Software: o Electronic File Format  Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the Energy Commission’s software and Microsoft (MS)-operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROM. The following describes the accepted formats for electronic data and documents provided to the Energy Commission as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:  Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.  Text documents will be in MS Word file format, version 2007 or later.  Documents intended for public distribution will be in PDF file format.  The Recipient must also provide the native Microsoft file format.  Project management documents will be in Microsoft Project file format, version 2007 or later.  Presentations will be in Microsoft PowerPoint format, version 2007 or later.

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below by the dates listed in the Project Schedule (Part V). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of the product is required. With respect to due dates within this Scope of Work, “days” means working days. The Recipient shall: For products that require a draft version, including the Final Report Outline and Final Report version • Submit all draft products to the CAM for review and comment in accordance with the Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • Consider incorporating all CAM comments into Submit the final productproduct to the CAM once agreement has been reached on the draft. The CAM will provide written approval of the final product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into CAM determines that the final product. • Submit product does not sufficiently incorporate his/her comments, submit the revised product and responses to comments the CAM within 10 days of notice by the CAM, unless the CAM specifies a longer time period, or approves a request for additional time. For products that require a final version only • Submit the product to the CAM for acceptanceapproval. The • If the CAM may request minor revisions or explanations prior determines that the product requires revision, submit the revised product to acceptancethe CAM within 10 days of notice by the CAM, unless the CAM specifies a longer time period. For all products • Submit all data and documents required as products in accordance with the following: following Instructions for Submitting Electronic Files and Developing Software: o Electronic File Format  Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the Energy Commission’s software and Microsoft (MS)-operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROM. The following describes the accepted formats for electronic data and documents provided to the Energy Commission as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:  Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.  Text documents will be in MS Word file format, version 2007 or later.  Documents intended for public distribution will be in PDF file format.  The Recipient must also provide the native Microsoft file format.  Project management documents will be in Microsoft Project file format, version 2007 or later.

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below by the dates listed in the Project Schedule (Part V). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of the product is required. With respect to due dates within this Scope of Work, “days” means working days. The Recipient shall: For products that require a draft version, including the Final Report Outline and Final Report • Submit all draft products reports and data sheets to the CAM for review and comment in accordance with the Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product reports within 15 days of receipt, receipt unless otherwise specified in the task/subtask for which the product report is required. • Consider incorporating all CAM comments into the final productreport. If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into the final product. • Submit the revised product report(s) and responses to comments within 10 days of notice by the CAM, unless the CAM specifies a longer time period, or approves a request for additional time. For products that require a final version only • Submit the product to the CAM for acceptance. The CAM may request minor revisions or explanations prior to acceptance. For all products • Submit all data and documents required as products in accordance with the following: Instructions for Submitting Electronic Files and Developing Software: o Electronic File Format  Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the Energy Commission’s software and Microsoft (MS)-operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text  Text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROM. The following describes the accepted formats for electronic data and documents provided to the Energy Commission as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:  Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.  Text documents will be in MS Word file format, version 2007 or later.  Documents intended for public distribution will be in PDF file format.  The Recipient must also provide the native Microsoft file format.  Project management documents will be in Microsoft Project file format, version 2007 or later.

Products. The goal of this subtask is to establish the requirements for submitting project products (e.g., reports, summaries, plans, and presentation materials). Unless otherwise specified by the Commission Agreement Manager (CAM), the Recipient must deliver products as required below by the dates listed in the Project Schedule (Part V). Products that require a draft version are indicated by marking “(draft and final)” after the product name in the “Products” section of the task/subtask. If “(draft and final)” does not appear after the product name, only a final version of the product is required. With respect to due dates within this Scope of Work, “days” means working days. The Recipient shall: For products that require a draft version, including the Final Report Outline and Final Report • Submit all draft products to the CAM for review and comment in accordance with the Project Schedule (Part V). The CAM will provide written comments to the Recipient on the draft product within 15 days of receipt, unless otherwise specified in the task/subtask for which the product is required. • Consider incorporating all CAM comments into the final product. If the Recipient disagrees with any comment, provide a written response explaining why the comment was not incorporated into the final product. • Submit the revised product and responses to comments within 10 days of notice by the CAM, unless the CAM specifies a longer time period, or approves a request for additional time. For products that require a final version only • Submit the product to the CAM for acceptance. The CAM may request minor revisions or explanations prior to acceptance. For all products • Submit all data and documents required as products in accordance with the following: Instructions for Submitting Electronic Files and Developing Software: o Electronic File Format  • Submit all data and documents required as products under this Agreement in an electronic file format that is fully editable and compatible with the Energy Commission’s software and Microsoft (MS)-operating computing platforms, or with any other format approved by the CAM. Deliver an electronic copy of the full text of any Agreement data and documents in a format specified by the CAM, such as memory stick or CD-ROM. The following describes the accepted formats for electronic data and documents provided to the Energy Commission as products under this Agreement, and establishes the software versions that will be required to review and approve all software products:  • Data sets will be in MS Access or MS Excel file format (version 2007 or later), or any other format approved by the CAM.  • Text documents will be in MS Word file format, version 2007 or later.  • Documents intended for public distribution will be in PDF file format.  • The Recipient must also provide the native Microsoft file format.  • Project management documents will be in Microsoft Project file format, version 2007 or later.