Product Specification Limits Clause Samples
Product Specification Limits. Operator reserves the right to modify, supplement, or restate provisions as required to maintain safe and secure operations and to maintain regulatory compliance. Operator shall notify Customer as soon as practicable of any specification changes which become more restrictive for Customer’s use of the Berths. In the event that the dock or Product specifications are changed in a manner that becomes more restrictive than the specifications listed on Annex B, Section 6.0 and Section 7.0 at the time of executing this Agreement, the following procedures shall occur:
Product Specification Limits. Operator reserves the right to revise, amend and/or supplement these Specifications at any time. API Gravity @ 60 deg F ASTM D-287 12 to 42 degree Pour Point - deg F ASTM D-97 70F or less Viscosity, cst @100 deg F ASTM D-445 375 cst or less See note 3 Viscosity, cst @122 deg F ASTM D-445 150 cst or less See note 3 BS&W, vol % ASTM D-4007 3% or less Total Sulfur, wt % ASTM D-4294 4% or less H2S in vapor, ppm ASTM D-5705 3500 ppm or less See note 1 Mercaptan Sulfur, ppm UOP-163 100 ppm or less See note 2 ▇▇▇▇ Vapor Pressure psi @ 100F ASTM D-323-82 6 psi or less API Gravity @ 60 deg F ASTM D-5002 1 to 30degree Flash Point - deg F ASTM D-93 125F or higher Pour Point - deg F ASTM D-97 70F or less Viscosity, cst @122 deg F ASTM D-445 2000 cst or less Total Sulfur, wt % ASTM D-4294 4 % or less H2S in vapor, ppm ASTM D-5705 100 ppm or less See note 1 Mercaptan Sulfur, ppm UOP-163 100 ppm or less See note 2 True Vapor Pressure, psia ASTM D-2879 0.49 psia or less Temperature DEG F 145 Deg F Max
1) H2S in vapor test is for residual fuel oils. For crude oils this is not an exact measure of the H2S in any vapor space. It is used to compare one material relative to others that have been handled previously.
2) Mercaptan or H2S levels near 100 ppm may result in odor complaints from neighbors, especially if materials require heating and tanks are being emptied or filled.
3) Pumping material with viscosity exceeding 375 cst requires approval by Tesoro Engineering and Marine Terminal Operations.
4) Proper precautions for handling high H2S materials should be observed at all times regardless of quality test result data.