Product Specification. Licensee shall provide to PalmSource a written, detailed product specification for each Licensee Product released by Licensee after the Original Execution Date, prior to receiving any development support and training services (as described in Section 8 (Support and Training) below) to facilitate development support. Subject to the exceptions set forth in Section 13.2 (Exceptions to Confidential Information) below, such specification shall be deemed Confidential Information of Licensee for purposes of this Agreement, regardless of whether or not it is so marked. Licensee shall use its reasonable commercial efforts to xxxx such materials as confidential.
Product Specification. Production specifications - Suppliers with development responsibility shall implement the customer’s requirements in all necessary product descriptions (such as functional specification, drawings, internal standards, …). However, production-related dimensions that are not described in 3D data models (e.g. connection points, form dividing seams) must generally be determined and specified. To avoid processing and conflict problems, they must be coordinated with the responsible voestalpine person who coordinates development at voestalpine. PROCESS FLOW CHART The supplier shall prepare a process flow chart for the entire process chain. At voestalpine’s request, this process flow chart shall be presented before the start of series production for joint discussion. The process flow chart must be consistent with the process FMEA and the production control plan.
Product Specification. The functions of the Software and a description of any Services are set forth and described in the product description available on the TeamViewer website under this link and on the applicable Order (“Product Specification”). Only this Product Specification shall be relevant to the contractually agreed quality and features of the Software and the Services; any other oral or written statements of TeamViewer shall not be relevant. Some features and functions of the Software or Services provided by TeamViewer may include or depend on certain third-party products and services all of which may be subject to changes by such third parties. Accordingly, such features and functions may be modified or limited by TeamViewer.
Product Specification. XXXX represents and warrants that all the Biodiesel delivered to MBF will comply, at the time of delivery at the Biodiesel Delivery Point, with the Standard EN 14214 in force at the time of delivery subject to the following additions and amendments : water maximum of 350ppm, Monoglycerides 0.5 mass % Max, CFPP maximum of 12 degrees Celsius for TME, and Monoglycerides 0.5 mass % Max ,CFPP maximum of minus 3 degrees Celsius, iodine maximum 135 and cetane minimum 47 for SME, FOB specification. No additives will be combined with or added to the Biodiesel unless requested by MBF. If MBF requests that no oxidative stabilizer be added, the oxidative stability requirements of the EN14214 and ASTM D6751 specifications in force at time of delivery will be waived, provided however that XXXX shall make reasonable best efforts to meet the EN14214 and ASTM D6751 oxidative stability requirements to the extent possible without the addition of any additives. XXXX also represents and warrants that all Biodiesel delivered to MBF will comply, at the time of delivery at the Biodiesel Delivery Point, with the ASTM biodiesel standards in force at the time of delivery including winter cold soak requirements (with the exception of oxidative stability if MBF request that no oxidative stabilizer be added). If MBF requests the addition of oxidative stabilizer to the Biodiesel, XXXX will add such oxidative stabilizer at XXXX’x expense, and in the *** Confidential material redacted and filed separately with the Commission. case of oxidative stabilizer being added Biodiesel will meet EN14214 specifications for oxidative stability. Should MBF request the use of an oxidative stabilizer not normally used by REG, MBF will bear the cost of said oxidative stabilizer.
Product Specification. The Product must be manufactured, packaged, labeled, and handled according to the Specifications, the Master Production Record, procedures mutually agreed to in writing between Customer and BVL and Applicable Law. Customer and BVL shall develop all in-process and Product release specifications, including acceptance limits for each required test. Establishment of appropriate test methods and supporting test method validation will be performed by BVL and approved by Customer. Each lot of Product manufactured by BVL for Customer will be sampled and tested in accordance with the Specification.
Product Specification. 4.1 Sufficient B-type or wide pore spherical synthetic amorphous silica (silicon dioxide, Si02) in accordance with US Military Specifications for desiccant materials, which details requirements for bagged, chemically inert and dehydrating agents (Desiccant Materials-MIL-D-3464). Each 100 or 500-capsule container may include 1-3 desiccant packs of desiccant to achieve best humidity absorption results.
Product Specification. Licensee shall promptly provide Palm with a written detailed specification or product plan for each Licensee Product.
Product Specification. The Product Specifications are regulated in the Quality Agreement and its relevant Annexes. A copy of the Product Specifications as of the Product Schedule Effective Date is attached hereto as Exhibit A. FRESENIUS shall provide COMPANY with a copy of any revised Product Specifications.
Product Specification. The Product Specifications are set forth in the Quality Agreement attached to the Supply Agreement as Exhibit 2 and its relevant Annex.
Product Specification. The Product is an FW-7870A-AN1 with standard description listed below: Model# FW-7870A Form Factor 19” 1U Rackmount Mother Board MB-X76 CPU Type (supports up to) P4 3.4Ghz LGA775 Hyper Threading (HT) Yes Front Side Bus (FSB) 533, 800Mhz or higher Chipset I915GV North Bridge (chip) I915GV Xxxxx Xxxxxx (xxxx) XXX0 Memory Type DDR400, 533 Memory MAX 4GB Memory Channel/Bus Dual Network Connectors Modularize design, fit up to 2 Modules Network Controller Chips Depends on Modules Storage Interface 2x sata150 lx 44-pin lx 40-pin lx CF Expansion Slot 1x Mini PCI lx PCI BIOS Type Award RTC Internal Operating Temperature 0-40 °C Humidity 10-90% Power Supply 300W HDD Bay 3.5” SATA A10 AND MANUFACTURER CONFIDENTIAL The Product includes the following components and customizations:
