Product Return Clause Samples

Product Return. 5.1 Hardware validated as Dead on Arrival (“DOA”) will qualify for replacement hardware for the affected unit. DOA is considered when Product exhibits hardware failure upon its first use out of the box (that is, if the Product failed during first power up or failed during initial system self-test/boot up) within the first thirty (30) days from the shipment date of Product from BT to the Customer, using DOA assessment criteria as defined within the IT Administrators’ Guide. The DOA unit must be received by Dolby® within thirty (30) days of the date the replacement was shipped by Dolby® to the Customer. Should the Product not be returned within such thirty (30) day period BT reserves the right to charge the Customer for the Product. 5.2 Hardware covered under Dolby’s standard one-year Product warranty will qualify for a replacement (free of charge replacement for any manufacturer’s defect). The Customer must return the defective unit to Dolby® under RMA, and title shall transfer to Dolby® upon receipt of the defective Product by Dolby®. Upon receipt of the Product from the Customer, Dolby® will ship a new item. The Customer will retain this unit, and Dolby® will retain the defective unit. Dolby® shall be responsible for the delivery of the replacement Product to the Customer, and title shall pass to the Customer upon receipt of the Product. 5.3 Hardware covered under Dolby’s Premier Service will qualify for an Advanced Replacement (free of charge new replacement) for any manufacturer’s defect. Dolby® will cover freight charges, duties, and taxes both to and from the Dolby® repair facility to the Customer’s location. The defective unit must be received by Dolby® within thirty (30) days of the date the replacement was shipped by Dolby® to the Customer. Should the Product not be returned within such thirty (30) day period BT reserves the right to charge the Customer for the Product. 5.4 For returns of defective Product, Customer must: • inform BT of the fault, giving details related to the defect, • Customer’s complete shipping address, • Customer’s contact name, phone number, email address, • the serial number of the defective Product. 5.5 For all returns the Customer must obtain Return Material Authorization (“RMA”) number from BT. The Customer will be instructed where to return the Product. The lack of technical details related to the defect could cause a delay in turnaround time and/or impact the warranty. If multiple items are being returned, each line ite...

Product Return. The customer may return Products to Astute only with a return material authorization ("RMA") number issued by Astute. An RMA shall be issued by Astute subject to the following:(i)Returns for Visual Defect: Astute receipt of written notice of any damage to outer packaging, damage to Products, shortage of Products, or other discrepancy ("Visual Defect") within five (5) business days after receipt of the shipment; otherwise, the Customer is deemed to have accepted the Products;(ii)Returns for Product Warranty: Astute receipt of written notice stating the specific Product defect within the warranty period;(iii)The defect notified under (i) or (ii) was caused solely by Astute or the original manufacturer;(iv)The defect notified under (i) or (ii) is not damage, shortage, or other discrepancy created by the Customer, a carrier, a freight provider or any third party;(v)Customer must return the Products to Astute in compliance with instructions in the RMA provided by Astute; and(vi) Astute’s assessment of returned Products confirms eligibility for return under this section.

Product Return. Salix shall have the sole responsibility and right to accept any returned Product. Altana shall not solicit the return of any Product and shall not receive or accept any returned Product. In the event that any such Product is inadvertently returned to Altana, Altana shall promptly ship such Product to Salix, along with any documentation or explanation Altana receives regarding the reason for the return, at Salix’s cost and expense.

Product Return. Subdistributor shall obtain prior written consent from Distributor before returning any Product to Supplier; and

Product Return. Bulk Motor Fuel Products that do not meet the Product quality requirements stated herein and are judged by Authorized Users to be unacceptable may be rejected. a. Contract with its vendor to pump the Product from the tank; b. Provide tank cleaning to bring the tank back to its prior condition; c. Replace the fuel at no additional cost to the Commonwealth; d. Reimburse Authorized User for the repairs to their vehicles, if the Authorized User’s vehicles are damaged by the contaminated Product; and, e. Provide a report, within 60 days of the incident to the Authorized User and OFMS on the resolution of the issue and the preventative measures to be put in place to reduce the possibility of future incident.

Product Return. Customer may return Products to Astute only with a return material authorisation (“RMA”) number issued by Astute. Customer must notify Astute in writing of any damage to the outer packaging or the Products, shortage, or other discrepancy (“Visual Defect”) within three (3) days after receipt of the shipment; otherwise, Customer is deemed to have accepted the Products and may not revoke acceptance. RMA’s will be issued only for Visual Defects created solely by Astute or the original manufacturer, and only if Customer satisfies the notice requirement. RMA’s will not be granted for damage, shortage, or other discrepancy created by Customer, the carrier or freight provider, or any other third party. Product return pursuant to a warranty requires written notice from Customer to Astute within the warranty period detailing the Product defect. Customer must return the Products to Astute freight prepaid in original manufacturer’s shipping cartons or equivalent, along with acceptable proof of purchase, within the warranty period and as specified in the RMA. At Astute’s discretion, Astute will return all Products not eligible for return to Customer, freight collect, or hold Product for Customer’s account at Customer’s expense.

Product Return. In the event Buyer rejects or revokes acceptance of any products for any reason, all risk of loss and/or damage to such products shall nonetheless remain with Buyer unless and until the same are returned at Buyer's expense to such place as Seller may designate in writing. Prior to returning any product for any reason, ▇▇▇▇▇ will notify Seller and obtain a return materials authorization (RMA) number and will follow Seller’s RMA instructions.

Product Return. Customer may return Products to IMS only with a return material authorization (“RMA”) number issued by IMS. Returns for Visual Defect: Customer must notify IMS in writing of any damage to the outer packaging or the Products, shortage, or other discrepancy (“Visual Defect”) within three business days after receipt of the shipment; otherwise, Customer is deemed to have accepted the Products. IMS will only issue an RMA if the defect is created solely by IMS, and only if Customer meets the notice requirement. IMS will not grant RMAs for damage, shortage, or other discrepancy created by Customer, the carrier or freight provider, or any other third party. Upon receiving the RMA, Customer must return the Products to IMS in compliance with IMS’ instructions in the RMA. IMS may assess all Products returned by Customer via RMA. If IMS determines such Products are not eligible for return, IMS will send such Products back to Customer on freight collect basis, or hold such Products for Customer’s collection and on account at Customer’s expense.

Product Return. Customer may return Products to Avnet only with a return material authorization (“RMA”) number issued by Avnet. (A) Returns for Visual Defect: Customer must notify Avnet in writing of any damage to the outer packaging or the Products, shortage, or other discrepancy (“Visual Defect”) within three business days after receipt of the shipment; otherwise, Customer is deemed to have accepted the Products. (B) Returns for Product Warranty: Customer must notify Avnet in writing stating the specific Product defect within the warranty period. Avnet will only issue an RMA if the defect (either for Visual Defect or for Product Warranty) is created solely by Avnet or the original manufacturer, and only if Customer meets the notice requirement. Avnet will not grant RMAs for damage, shortage, or other discrepancy created by Customer, the carrier or freight provider, or any other third party. Upon receiving the RMA, Customer must return the Products to Avnet in compliance with Avnet’s instructions in the RMA. Avnet may assess all Products returned by Customer via RMA. If Avnet determines such Products are not eligible for return, Avnet will send such Products back to Customer on freight collect basis, or hold such Products for Customer’s collection and on account at Customer’s expense.