PLASTERERS Sample Clauses

PLASTERERS. For the purpose of this Agreement and in order to alleviate any misunderstandings, it is expressly understood and agreed by and between all Parties to this Agreement that while the Agreement is Province-wide in scope, “reference to Plasterers, means those Plasterers now and who hereafter become members of a Local Union. It is further agreed regarding Plasterers, that all conditions defined in this Agreement shall apply to only those Geographical Areas and Local Unions hereinafter defined.
Sample 1Sample 2Sample 3See All (8)
AutoNDA by SimpleDocs
PLASTERERS. (i) The company will supply all floating rules, trammels, centres, buckets and sieves. Stands for Plasterer's mortar boards not less than 76 cm from the ground or where practicable and safe from a scaffold level will be provided for the Plasterer by the company when requested.
Sample 1
PLASTERERS. Remove and refix upstands. Re-secure kitchen units. Remove/refix/renew ply as part of main task. Remove boards from doors/windows. Small brickwork, as part of main task. Touch up paintwork as necessary. Remove/refix radiators, as part of main task. Core cutting. General labouring as part of main task. Lift/relay 1/2 slabs as part of main task. Remove/replace skirting/fascias as part of task Make front/back doors lock-fast. Paint small areas of repaired/renewed timbers. Renew/replace light bulbs replace shades. Renew fluorescent tubes/replace diffusers Renew fluorescent starters. Remove/refix/renew shuttering as part of task. Bleed radiators. Generally assisting other trades.
Sample 1
PLASTERERS. Section 3: When a gun is used and the diameter of the hose is one and one-half (1 ½) inches or larger, it will be tended by a Journey Hod Carrier or Hod Apprentice.
Sample 1
PLASTERERS. C. This rule shall apply to all finish work except staff work.
Sample 1
PLASTERERS. 2. On outside finish coat, or outside brown there shall be one ( 1 ) Plaster Tender for up to every two (2)
Sample 1
PLASTERERS. D. On all other work, under ordinary conditions, there shall be one (1) Plaster Tender for up to every two (2) Plasterers on scratch and brown; provided, however, that where a plastering machine is used, or where unusual conditions exist, the Plastering Contractor and the Business Representative of the Local Union involved will attempt to make a decision as to the number of workers who will be employed depending on the conditions of the job; however, in the event the Plastering Contractor and the Business Representative are unable to agree within twenty-four (24) hours, then the final decision will be immediately resolved by the Joint Conference Board as provided in Article XVII.
Sample 1
AutoNDA by SimpleDocs
PLASTERERS. 1 Chalk line Xxxxx 0 Xxxxxx 0 Rule 1 Axe 1 Set of broad knives 1 knife 1 Tool bag or box INTERNATIONAL ASSOCIATION OF HEAT AND FROST INSULATORS AND ASBESTOS WORKERS APPENDIX The amendments contained in the Statement of Settlement, dated June have been incorporated into the Insulators’ Appendix in accordance with the “Term of article contained in the Portion of this Agreement. INTERNATIONAL ASSOCIATION OF HEAT AND FROST INSULATORS AND ASBESTOS WORKERS APPENDIX to the Collective Agreement by and between THE ELECTRICAL POWER SYSTEMS CONSTRUCTION ASSOCIATION (hereinafter called and the ONTARIO ALLIED CONSTRUCTION TRADES COUNCIL (hereinafter called the “Council”) As provided in “Appendices” article the Master Portion of the Collective Agreement, and the Council have agreed to the following conditions to apply to employees in classifications listed in Article 1 of this Appendix.
Sample 1
PLASTERERS. For the purpose of this Agreement and in order to alleviate any misunderstandings, it is expressly understood and agreed by and between all Parties to this Agreement that while the Agreement is Province-wide in scope, "reference to Plasterers, means those Plasterers now and who hereafter become members of a Local Union. It is further agreed regarding Plasterers, that all conditions defined in this Agreement shall apply to only those Geographical Areas and Local Unions hereinafter defined. local BARRIE The area covered by the Agreement shall be the Townships of Oro, West in the County of and the Township of in the County of Dufferin, including Bracebridge, Huntsville, Falls, Beaverton and surrounding territories and the Townships of Tiny and Tay in the County of local CATHARINES Townships of Grantham, Louth, Clinton, Gainsborough in the County of Lincoln. All territory lying North of No. Highway in the Townships of and in the County of Welland. Township Niagara in the County of Lincoln. Townships of Stamford, Xxxxxxxxxx, in the County of Welland. Townships Wainfleet, and all territory lying South of Highway No. in Pelham and in the County of Welland. County of Welland. Townships of and in County. local KINGSTON The Counties of and Xxxxxxxxx, except the Township of Richmond, the County of Frontenac, the Township of Leeds in the County of Leeds, the Township of Front of Front of and in the County of Leeds and the Township of Augusta in the County of Grenville. The City of Peterborough and the Town of Lindsay and the Counties in which the said City and Appendix Town are situated. The Township of Cavan and Hope in Durham County and the County of and the Townships of Xxxxxxxx, in the County of Northumberland. The Counties of and Glengarry and the Township of in the County of Grenville. local KITCHENER The County of Waterloo and the Townships of Mornington, Xxxxxxx in the County of Perth, Townships of Ashfield, East West Morris, Grey, Turnberry, in the County of Huron. The Counties of Xxxx, Xxxxx, and Wellington. The County of Norfolk, the County of Xxxxx and all ter- ritories of Oxford County lying East of Highway For plastering only, the area is extended to include the County of Wellington and Dufferin. local OSHAWA County of Ontario, except the Townships of Xxxxxxxxx, Xxxx, and County of Durham, except the Townships of Hope and Cavan.
Sample 1

Related to PLASTERERS

  • GLASS The Tenant shall maintain the glass part of the demised premises, promptly replacing any breakage and fully saving the Landlord harmless from any loss, cost or damage resulting from such breakage or the replacement thereof.

  • Scratches (Q) appliance malfunctions and any resultant leak there from; (R) any stain, soiling or damage resulting from everyday use or which has built up over time, e.g. hair, body or suntan oils and/or lotions; (S) signs of soiling include darkened areas where the body comes into contact with the furniture (these darkened areas are signs of soil build-up, which is not covered); (T) general maintenance and overall cleaning of the furniture is the consumer’s responsibility; (U) damage due to harsh or corrosive chemicals; (V) acids, including without limitation, dyes and inks (except ballpoint), plant food and fertilizer and bleach, gum; (W) any non-operating part or decorative parts such as hinges, knobs, handles, or shelves; (X) coverage under another insurance program; (Y) delivery and/or redelivery and/or loss or damage to the Covered Product while in the course of transit; (Z) design deficiency; (AA) fabrics with “X” cleaning codes and non-colorfast fabrics and leathers; (AB) odors; (AC) variation of the color, or graining of wood or wood products, marble or leather; (AD) split leathers used in seat cushions, back cushions or top or inside arm areas; (AE) natural markings on leather, such as, healed scars, insect bites, brand marks or wrinkles, or suede, and leathers with embossed patterns other than those stimulating natural cowhide; (AF) non- bovine leathers, and other buffed leathers; (AG) stains, color loss or damage resulting from cleaning methods or products (detergents, abrasives or other harsh cleaning agents) other than those recommended by the furniture manufacturer; (AH) stone or sand abrasion; (AI) loss or damage resulting from: pre-existing conditions known to You; (AJ) wear related issues, such as but not limited to, fading, wear, seam separation, stress tears, loss of foam resiliency, pilling or fraying of any fabric on all types of furniture; (AK) color loss or cracking and peeling on any leather or vinyl; (AL) splits or bi-cast leather; (AM) furniture that is used for commercial, institutional, outdoor or rental purposes; (AN) Customer’s Own Material furniture; (AO) wicker, rattan, and teakwood furniture; (AP) massage chairs; (AQ) stains or damage to suede, split-grain leather hide or exotic leathers; (AR) manufacturer quality issues such as stress tears, fabric flaws, fading, color loss or change, loss of foam or resiliency, cracking and peeling of leather or vinyl, natural leather markings, and defects in design and workmanship; (AS) Stains or damage that occur during assembly, delivery, installation, before furniture is delivered to your residence, while the furniture is located outside of your residence, while the furniture is in storage or being moved to or from storage or between residences; (AT) Wear & Tear caused by repeated use such as scuffing, soiling, hair/body oil, perspiration, surface abrasions, pilling or fraying of fabric, loose joints; (AU) Stains or damage covered under any manufacturer warranty, recall, homeowner, renter or other insurance policy; (AV) Stains or damage caused by structural problems, appliance malfunctions, Acts of God or natural disasters, theft, vandalism or illegal activity (AW) Stains or damage caused by independent contractors Specific to Home Automation: In additional to the exclusions listed above, this Agreement does not cover any loss, repairs or damage caused by or resulting from: (A) pre-existing conditions incurred or known to you (pre-existing means a condition prior to Plan issuance); (B) any repair covered by a manufacturer’s warranty or any insurance; (C) installation, or improper installation; or improper installation of customer replaceable components, modules, parts or peripherals; (D) damage or failure due to causes beyond our control such as environmental conditions, exposure to weather conditions or acts of nature including, but not limited to: fire, floods, smoke, sand, dirt, lightning, moisture, water damage, freezes, storms, wind, windstorm, hail, earthquake, animal or insect infestation, etc.; (E) damage or failure caused by riot, nuclear radiation, war, hostile action, or radioactive contamination, etc.; (F) battery failure or leakage; (G) collision, collapse, or explosion; (H) liquid spillage of any kind; (I) signal reception, transmission problems resulting from external causes, interruption of electrical service, loss of power, improper use of electrical/power, power “brown-out”, power overload or power surge (unless covered in the Special Features section of this document); (J) neglect, misuse, abuse, intentional damage, malicious mischief, theft, mysterious disappearance, vandalism or accidental damage; damage cause by dropping (K) rust, corrosion, warping, bending, etc.; (L) damage, warping, bending or rusting of any kind to the housing, cabinetry, outside casing or frame of the product; (M) any non-operating part, including but not limited to plastic, or decorative parts such as hinges, knobs, door liners, glass, handles, masks, rack rollers, shelves, etc.; (N) loss of or repair to components within the product not originally covered by the manufacturer’s warranty; (O) failure to product attachments not provided by the manufacturer or included in the original sale;

  • Sprinklers Subject to any terms, conditions and limitations set forth herein, Landlord shall provide an operative sprinkler system consisting of mains, laterals, and heads “AS IS” on the date of delivery of the Premises to Tenant. Tenant shall pay for piping distribution, drops and relocation of, or additional, sprinkler system heads and Building firehose or firehose valve cabinets, if Tenant’s Plans and/or any applicable Laws necessitate such.

  • Trees 1) Any major tree surgery or tree removal over a three (3) inch diameter, which becomes necessary through no fault of the Contractor, will be at the County's expense.

  • Welding Welding and use of cutting torches or cutoff saws will be permitted only in areas that have been cleared or are free of all material capable of carrying fire. Flammable debris and vegetation must be removed from within a minimum 10-foot radius of all welding and cutting operations. A shovel and a 5-gallon standard backpack water container filled and with handpump attached shall be immediately available for use in the event of a fire start. C8.212 – MARKET-RELATED CONTRACT TERM ADDITION (11/08). The term of this contract may be adjusted when a drastic reduction in wood product prices has occurred in accordance with 36 CFR 223.52. The Producer Price Index used to determine when a drastic reduction in price has occurred is stated in A20. Purchaser will be notified whenever the Chief determines that a drastic reduction in wood product prices has occurred. If the drastic reduction criteria specified in 36 CFR 223.52 are met for 2 consecutive calendar quarters, after contract award date, Contracting Officer will add 1 year to the contract term, upon Purchaser’s written request. For each additional consecutive quarter such a drastic reduction occurs, Contracting Officer will, upon written request, add an additional 3 months to the term during Normal Operating Season, except that no single 3-month addition shall extend the term of the contract by more than one year. Contracting Officer must receive Purchaser’s written request for a market-related contract term addition before the expiration of this contract. No more than 3 years shall be added to a contract's term by market-related contract term addition unless the following conditions are met:

  • Walls 12 Developer shall provide rustication patterns on all walls, except drainage headwalls, in Aesthetic 13 Area 3 in accordance with Exhibit L2.24 of the LAADCR. The final designs shall resemble these 14 simulations.

  • Overbuilds Sprint will not provide non-discriminatory access to FTTH Loop or FTTC Loop on an unbundled basis when Sprint has deployed a FTTH Loop or FTTC Loop parallel to, or in replacement of, an existing loop facility, except that:

  • Insulation In exterior walls? Yes No Unknown In ceiling/attic? Yes No Unknown In any other areas? Yes No Where? Comments:

  • Doors Exterior doors may not be propped open for safety and security reasons. Students may be referred to the student conduct system if found propping these doors. Doors marked as emergency exits may only be used for emergency purposes other than during University-sanctioned move-in days.

  • Glazing All new and replacement exterior windows shall have sealed, low emmissivity, insulating glass units which are manufactured by members of SIGMA and IGCC. Sealed insulating glass shall meet ASTM E774, class B. Glass shall be hermetically dual sealed, inert gas filled, double pane units with exterior 3/16” bronze float glass (IoE second surface), ½” air space, and interior 3/16” clear float glass. Insulated panels, if used, shall be 1” laminated panels equal to Xxxxx Industries architectural panels with a porcelain fused-on finish. Wired or clear fire-rated glass shall be UL approved. Safety glass shall be tempered or laminated, and shall meet ANSI 297.1 standard.

Time is Money Join Law Insider Premium to draft better contracts faster.