OTS System Clause Samples
OTS System. The OTS is controlled locally by the Duvha Power Station Operating Contractor interfacing with the Duvha Power Station Coal Handling Contractor responsible for the strategic stockpile and import coal.(2-way radio used supplied by contractor)
OTS System. The OTS system has been in operation since 1990. The OTS systems delivers between 700t/hr and 2 100 t/hr to the Employer. The belt running times and coaling intervals are controlled by the Duvha Power Station Operating Contractor interfacing with the Duvha Power Station Coal Handling Contractor responsible for the strategic stockpile and import coal.
OTS System. The Duvha Power Station Operating Contractor in liaison with the Supervisor, IFALETHU Mine (South 32) and the Duvha Power Station Maintenance Contractor plans the maintenance for the OTS system only when both belts from IFALETHU Mine (South 32) are available for production.
OTS System. The Employer provides the power supply to the works. The Employer’s responsibility ends at the cable from the switchgear to the field equipment, excluding the terminations. The limits of the Contractor’s responsibilities with regards to power supply, are the terminations of the field equipment (i.e the terminations are the responsibility of the contractor). The Contractor also maintains the earthing. The complete reclaim conveyor system from the Buffalo feeder, up to and including to the last chutes that throws onto conveyor 6A&B and conveyor 8A&B. Refer to Appendix C: OTS Conveyor System Layout.
OTS System. The OTS system consist of transfer houses, substation, lifting equipment, 6 buffalo feeders, magnet belt and 4 conveyor belts of varying lengths, approximately 2 km long in total, viz: Reclaim conveyor Ramp conveyor Cross conveyor Link conveyor The Contractor provides the complete maintenance of the system in such a manner to provide coal to Duvha Power Station at a continuous rate and in conjunction with the tonnage scheduled for each month, so as not to constrain any operation of the Employer. The Contractor provides the Maintenance of both the overland and OTS systems. The remote control of overland conveyor system is done by the Contractor using a SCADA system from the Outside Plant Control. The OTS system is under the Contractor’s control.