MUXCTRL Packet Sample Clauses

MUXCTRL Packet. 1. In a video session, the AVPF profile MUST be supported and signaled in the MUXCTRL packet as specified in the TIP specs [11] regardless if this is a non-secure or secure session. This in turn mandates support for the transmission and reception of the RTCP video feedback packets as specified in the TIP specs. 2. In an audio-only session, the profile MUST be AVP, regardless if this is a non-secure or secure session. 3. The options field of the MUXCTRL packet MUST be set to 0x00. 4. Triple screen devices MUST set the number of transmitted streams to 6 for a video session supporting legacy video streams and to 3 for a video session not supporting legacy streams. 5. Single screen devices MUST set the number of transmitted streams to 2 for a video session supporting legacy streams and to 1 for a video session not supporting legacy. 6. Devices MUST set the number of shared streams for the video session to zero if presentation is not supported, to 1 if a single presentation stream is supported and to 2 if dual stream presentation is supported. 7. Devices MUST set the number of shared streams for audio sessions to zero. 8. Triple screen devices MUST set the number of transmitted audio streams to 5 when both legacy and presentation are supported, to 4 when no legacy streams are supported and to 3 when no presentation and no legacy streams are supported. 9. Single screen devices MUST set the number of transmitted audio streams to 3 when both legacy and presentation are supported, to 2 when no legacy streams are supported and to 1 when no presentation and no legacy streams are supported. 10. The number of received video streams MUST be set to 3 for triple screen devices and to 1 for single screen devices in MUXCTRL. 11. The number of received audio streams MUST be set to 5 for devices supporting legacy streams and set to 4 for devices not supporting legacy streams in MUXCTRL. 12. For triple screen devices, the transmit video positions MUST only contain: center, left, right, legacy center, legacy left and legacy right, when legacy is supported and MUST only contain: center, left and right when legacy is not supported. 13. For single screen devices, the transmit video positions MUST only contain: center, and legacy center, when legacy is supported and MUST only contain: center when legacy is not supported. 14. The table 3 below shows how the shared video positions MUST be set based on the level of auxiliary (AUX), or presentation, video support required for the sessi...
View SourceView Similar (2)

Related to MUXCTRL Packet

  • Catalog Information about Hawthorn University is published in a school catalog that contains a description of certain policies, procedures, and other information about the school. Hawthorn University reserves the right to change any provision of the catalog at any time. Notice of changes will be communicated in a revised catalog, an addendum or supplement to the catalog, or other written format. Students are expected to read and be familiar with the information contained in the school catalog, in any revisions, supplements and addenda to the catalog, and with all school policies. By enrolling in Hawthorn University, the student agrees to abide by the terms stated in the catalog and all school policies.

  • Unbundled Channelization (Multiplexing) 5.7.1 To the extent NewPhone is purchasing DS1 or DS3 or STS-1 Dedicated Transport pursuant to this Agreement, Unbundled Channelization (UC) provides the optional multiplexing capability that will allow a DS1 (1.544 Mbps) or DS3 (44.736 Mbps) or STS-1 (51.84 Mbps) Network Elements to be multiplexed or channelized at a BellSouth central office. Channelization can be accomplished through the use of a multiplexer or a digital cross-connect system at the discretion of BellSouth. Once UC has been installed, NewPhone may request channel activation on a channelized facility and BellSouth shall connect the requested facilities via COCIs. The COCI must be compatible with the lower capacity facility and ordered with the lower capacity facility. This service is available as defined in NECA 4. 5.7.2 BellSouth shall make available the following channelization systems and interfaces: 5.7.2.1 DS1 Channelization System: channelizes a DS1 signal into a maximum of twenty- four (24)

  • Loop Provisioning Involving Integrated Digital Loop Carriers 2.6.1 Where Freedom has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to Freedom. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for Freedom (e.g. hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross Connect System (DACS)- door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non- designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from Freedom, and if agreed to by both Parties, BellSouth may utilize its Special Construction (SC) process to determine the additional costs required to provision facilities. Freedom will then have the option of paying the one-time SC rates to place the Loop.

  • COVID-19 Vaccine Passports Pursuant to Texas Health and Safety Code, Section 161.0085(c), Contractor certifies that it does not require its customers to provide any documentation certifying the customer’s COVID-19 vaccination or post-transmission recovery on entry to, to gain access to, or to receive service from the Contractor’s business. Contractor acknowledges that such a vaccine or recovery requirement would make Contractor ineligible for a state-funded contract.

  • Online Payments may be made online from the Money Matters tab in the Licensee’s Cal Poly Portal or at ▇▇▇▇://▇▇▇.▇▇▇.▇▇▇▇▇▇▇.▇▇▇/student_accounts/online_payments.asp. Online payments can be made with either eCheck (with no added convenience fee) or credit card (with an added 2.75% convenience fee). Online payments received after 5:00 pm will be recorded as paid the following business day. If there are any problems making a payment online, contact the University Student Accounts Office at (▇▇▇) ▇▇▇-▇▇▇▇ or by email to ▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇@▇▇▇▇▇▇▇.▇▇▇