Materials and Installation Sample Clauses

Materials and Installation. Any and all materials, equipment, supplies and furnishings incorporated in the Work or provided by TSP hereunder shall be new, shall comply with the requirements of the Contract Documents, including the Technical Requirements, and shall be of good quality, free of defects and suitable for their intended purpose, and TSP shall perform the TCS Installation Work in a workmanlike manner, without defects in construction or workmanship and shall comply with all requirements of the Contract Documents with respect thereto.
AutoNDA by SimpleDocs
Materials and Installation. Adjustment Rings The Contractor shall replace all adjustment rings with new rings per Exhibit No. 109 – Materials List found in Appendix C. The Contractor shall use the minimum number of rings possible for the adjustment. No shims or other leveling devices, other than leveling rings provided by the manufacturer, will be permitted. External Chimney Seal External chimney seals are to be installed for all frame adjustment work requiring excavation including adjustments, replacements, realignments, and raises unless indicated otherwise by the Engineer. This external sealing system shall prevent leakage of water into the manhole through the frame joint adjustment area. Two types of external chimney seals will be used as directed by the Engineer. The acceptable external chimney seals are:
Materials and Installation. A. Ceiling suspension materials
Materials and Installation. A. Carpet
Materials and Installation. The individual channel letters/components shall be constructed as follows:
Materials and Installation. The Autoclave will be supplied and erected at the Site by others. The Contractor shall install the brick lining comprising ceramic paper, and acid resistant bricks, compartment divider walls and the titanium nozzle liners. The Contractor’s scope of supply shall include, but is not limited to the following: • install the brick lining as detailed on the manufacturer/supplier’s design drawings which will consist of a ceramic paper layer (if detailed as the Supplier as part of the lining system), backing mortar joint, backing course of brick, face course mortar joint, and face course of brick. • install the brick lining to the nozzles which nominally consists of a ceramic paper layer (if deemed required by the Supplier), mortars as detailed, polymer blocks or sleeve as detailed, and the titanium sleeve. • installation of titanium compartment divider walls and titanium nozzle liners as detailed on the drawings • all materials (not detailed in clause 8.3 as being supplied by others), equipment, manpower, supervision, transportation as required to complete the installation of the brick lining • post installation treatment and/or curing in accordance with the manufacturer/supplier’s recommendations and procedures • inspection, examinations, and testing
Materials and Installation 
AutoNDA by SimpleDocs

Related to Materials and Installation

  • DELIVERY AND INSTALLATION Delivery

  • Installation Where installation is required, Contractor shall be responsible for placing and installing the product in the required locations at no additional charge, unless otherwise designated on the Contract or purchase order. Contractor’s authorized product and price list shall clearly and separately identify any additional installation charges. All materials used in the installation shall be of good quality and shall be free of defects that would diminish the appearance of the product or render it structurally or operationally unsound. Installation includes the furnishing of any equipment, rigging, and materials required to install or replace the product in the proper location. Contractor shall protect the site from damage and shall repair damages or injury caused during installation by Contractor or its employees or agents. If any alteration, dismantling, excavation, etc., is required to achieve installation, the Contractor shall promptly restore the structure or site to its original condition. Contractor shall perform installation work so as to cause the least inconvenience and interference with Customers and with proper consideration of others on site. Upon completion of the installation, the location and surrounding area of work shall be left clean and in a neat and unobstructed condition, with everything in satisfactory repair and order.

  • Communications Equipment Members of the board of directors or any committee thereof may participate in and act at any meeting of such board or committee through the use of a conference telephone or other communications equipment by means of which all persons participating in the meeting can hear each other, and participation in the meeting pursuant to this section shall constitute presence in person at the meeting.

  • Alterations Tenant shall not permit alterations in or to the Leased Premises unless and until the plans have been approved by Landlord in writing, which approval as to interior non-structural alterations shall not be unreasonably withheld, conditioned or delayed. Notwithstanding the foregoing, Tenant shall have the right without Landlord's consent, and in compliance with all other provisions of this Section, to make any non-structural alterations to the Leased Premises which do not materially impact the Building's mechanical or electrical systems, do not adversely affect the Building's appearance or value, and the cost of which does not exceed Forty Five Thousand and 00/100 Dollars ($45,000.00) in the aggregate, provided that Tenant gives Landlord fifteen (15) days prior written notice of any such alterations, along with copies of plans and specifications relating thereto. As a condition of such approval (or, with respect to any alterations permitted to be made by Tenant hereunder without Landlord's approval), Landlord hereby agrees that, upon written request by Tenant, at the time that Tenant is contemplating alterations, Landlord will inform Tenant as to whether such proposed alterations will be required to be removed by Tenant and restore the Leased Premises at the end of the Lease Term; otherwise, all such alterations shall at Landlord's option become a part of the realty and the property of Landlord, and shall not be removed by Tenant. Tenant shall ensure that all alterations shall be made in accordance with all applicable laws, regulations and building codes, in a good and workmanlike manner and of quality equal to or better than the original construction of the Building. No person shall be entitled to any lien derived through or under Tenant for any labor or material furnished to the Leased Premises, and nothing in this Lease shall be construed to constitute a consent by Landlord to the creation of any lien. If any lien is filed against the Leased Premises for work claimed to have been done for or material claimed to have been furnished to Tenant, Tenant shall cause such lien to be discharged of record within thirty (30) days after filing. Tenant shall indemnify Landlord from all costs, losses, expenses and attorneys' fees in connection with any construction or alteration under this Section 7.03, not performed by Landlord or an affiliate, and any related lien.

  • Alterations and Improvements Tenant shall make no alterations to the buildings or improvements on the Premises or construct any building or make any other improvements on the Premises without the prior written consent of Landlord. Any and all alterations, changes, and/or improvements built, constructed or placed on the Premises by Tenant shall, unless otherwise provided by written agreement between Landlord and Tenant, be and become the property of Landlord and remain on the Premises at the expiration or earlier termination of this Agreement.

  • Leasehold Improvements The Lessee agrees that no leasehold improvements, alterations or changes of any nature, (except for those listed on any attached addenda) shall be made to the leasehold premises or the exterior of the building without first obtaining the consent of the Lessor in writing, which consent shall not be unreasonably withheld, and thereafter, any and all leasehold improvements made to the Premises which become affixed or attached to the leasehold Premises shall remain the property of the Lessor at the expiration or termination of this Lease Agreement. Furthermore, any leasehold improvements shall be made only in accordance with applicable federal, state or local codes, ordinances or regulations, having due regard for the type of construction of the building housing the subject leasehold Premises. If the Lessee makes any improvements to the Premises the Lessee shall be responsible payment, except the following . Nothing in the Lease shall be construed to authorize the Lessee or any other person acting for the Lessee to encumber the rents of the Premises or the interest of the Lessee in the Premises or any person under and through whom the Lessee has acquired its interest in the Premises with a mechanic’s lien or any other type of encumbrance. Under no circumstance shall the Lessee be construed to be the agent, employee or representative of Lessor. In the event a lien is placed against the Premises, through actions of the Lessee, Lessee will promptly pay the same or bond against the same and take steps immediately to have such lien removed. If the Lessee fails to have the Lien removed, the Lessor shall take steps to remove the lien and the Lessee shall pay Lessor for all expenses related to the Lien and removal thereof and shall be in default of this Lease.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!