Common use of Material Certification Clause in Contracts

Material Certification. OWNER certifies the following to CONSIGNEE: (a) Each item of Inventory covered by this Agreement was produced by a manufacturer holding an FAA Approved Production Inspection System issued under FAR 21, Sub Part F, or by a manufacturer holding an FAA Production Certificate issued under FAR 21, Sub. Part G. Each item of Inventory was manufactured by the prime manufacturer or its approved manufacturing/supplier source holding one of the following agreements/approvals; (i) a Fixed Quantity Licensee/Consignment Agreement, or; (ii) an FAA/PMA Licensee Agreement, or; (iii) written approval for Direct Ship Authority from the prime manufacturer. None of the items of Inventory have been subjected to severe stress or heat (as in major aircraft, engine failure, accident or fire). Any part found not to comply with the standards of this paragraph 6 may, at Consignee's option, either be returned to Owner or disposed of in accordance with the appropriate regulatory standards; and, (b) The Inventory shall be sold by OWNER in an "as is" condition and OWNER makes no warranties, guarantees or representations of any kind, either express or implied, statutory or otherwise, except as set forth herein, with respect to the Inventory or any other equipment or parts delivered by OWNER to CONSIGNEE hereunder including any items of Inventory overhauled/repaired or recertified; and (c) All serialized and non-serialized items of Inventory (rotable, repairable and/or engine) will be accompanied with traceability to a commercial aviation regulated source. (d) Airworthiness release certificates, where applicable, will identify the FAA repair station number and the signature of the approving inspector, as well as all other pertinent information.

Material Certification. OWNER certifies the following to CONSIGNEE: (a) Each item of Inventory covered by this Agreement was produced by a manufacturer holding an FAA Approved Production Inspection System issued OWNER: S.T. ------------------------ CONSIGNEE: /s/ --------------------- under FAR 21, Sub Part F, or by a manufacturer holding an FAA Production Certificate issued under FAR 21, Sub. Part G. Each item of Inventory was manufactured by the prime manufacturer or its approved manufacturing/supplier source holding one of the following agreements/approvals; (i) a Fixed Quantity Licensee/Consignment Agreement, or; (ii) an FAA/PMA Licensee Agreement, or; (iii) written approval for Direct Ship Authority from the prime manufacturer. None of the items of Inventory have been subjected to severe stress or heat (as in major aircraft, engine failure, accident or fire). Any part found not to comply with the standards of this paragraph 6 may, at Consignee's option, either be returned to Owner or disposed of in accordance with the appropriate regulatory standards; and, (b) The Inventory shall be sold by OWNER CONSIGNEE in an "as is" condition and OWNER makes no warranties, guarantees or representations of any kind, either express or implied, statutory or otherwise, except as set forth herein, with respect to the Inventory or any other equipment or parts delivered by OWNER to CONSIGNEE hereunder including any items of Inventory overhauled/repaired or recertified; recertified in accordance with Article 11 hereof, and (c) OWNER shall certify and supply all applicable records, data and certification identifying back-to-birth records for life limited and/or time controlled items of Inventory, where applicable; and, (d) All serialized and non-serialized items of Inventory (rotable, repairable and/or engine) will be accompanied with traceability to a commercial aviation regulated source, OWNER: S.T. ------------------------ CONSIGNEE: /s/ --------------------- (e) In accordance with ATA Specification 106 and Federal Aviation Regulation ss.21.321 Sub. Part L, all Airworthy items of Inventory which are Class II products will be accompanied by FAA or airworthiness releases. (df) Each rotable, repairable and/or engine items of Inventory that is certified airworthy will be accompanied by its teardown/work report; and, (g) Airworthiness release certificates, where applicable, will identify the FAA repair station number and the signature of the approving inspector, as well as all other pertinent information.

Material Certification. OWNER certifies the following to CONSIGNEE: (a) Each item of Inventory covered by this Agreement was produced by a manufacturer holding an FAA Approved Production Inspection System issued under FAR 21, Sub OWNER: S.T. ------------------------ CONSIGNEE:/s/ -------------------- Part F, or by a manufacturer holding an FAA Production Certificate issued under FAR 21, Sub. Part G. Each item of Inventory was manufactured by the prime manufacturer or its approved manufacturing/supplier source holding one of the following agreements/approvals; (i) a Fixed Quantity Licensee/Consignment Agreement, or; (ii) an FAA/PMA Licensee Agreement, or; (iii) written approval for Direct Ship Authority from the prime manufacturer. None of the items of Inventory have been subjected to severe stress or heat (as in major aircraft, engine failure, accident or fire). Any part found not to comply with the standards of this paragraph 6 may, at Consignee's option, either be returned to Owner or disposed of in accordance with the appropriate regulatory standards; and, (b) The Inventory shall be sold by OWNER CONSIGNEE in an "as is" condition and OWNER makes no warranties, guarantees or representations of any kind, either express or implied, statutory or otherwise, except as set forth herein, with respect to the Inventory or any other equipment or parts delivered by OWNER to CONSIGNEE hereunder including any items of Inventory overhauled/repaired or recertifiedrecertified in accordance with Article 11 hereof; and (c) OWNER shall certify and supply all applicable records, data and certification identifying back-to-birth records for life limited and/or time controlled items of Inventory, where applicable; and, (d) All serialized and non-serialized items of Inventory (rotable, repairable and/or and.or engine) will be accompanied with traceability to a commercial aviation regulated source, OWNER: S.T. ------------------------ CONSIGNEE:/s/ -------------------- (e) In accordance with ATA Specification 106 and Federal Aviation Regulation ss.21.321 Sub. Part L, all Airworthy items of Inventory which are Class II products will be accompanied by FAA or airworthiness releases. (df) Each rotable, repairable and/or engine items of Inventory that is certified airworthy will be accompanied by its teardown/work report; and, (g) Airworthiness release certificates, where applicable, will identify the FAA repair station number and the signature of the approving inspector, as well as all other pertinent information.