Masonry Walls Sample Clauses

Masonry Walls. Masonry walls will be designed and reinforced in accordance with the applicable local and industry codes and standards.
AutoNDA by SimpleDocs
Masonry Walls. City Engineer to establish requirements. In addition, long uninterrupted expanses of walls greater than 300’ are discouraged while offsets and open views into subdivisions at points where siding conditions exist are encouraged.
Masonry Walls. 2.01.1 Only best quality "franka" stone from a quarry and a bed approved by the Architect, free from all defects, shall be used. Any stone showing blue marks (swaba) and/or other defects on the exposed face, or whose edges or corners have been chipped, shall be rejected. Should any such stones be used, the Architect in charge shall have the power to remove and replace any such work at the Contractor's expense. The Contractor shall also be bound to replace any defective materials in all or parts of the existing works by proper materials and/or workmanship as directed by the Architect. Once the quarry and bed are selected, these shall not be changed without the approval of the Architect.
Masonry Walls. Coordinate installation of frames to allow for solidly filling space between frames and masonry with mortar as specified in Division 4 Section "Unit Masonry Assemblies."

Related to Masonry Walls

  • MASONRY 4.1 Storm Shelter Area/Tornado Protection: In new building construction, provide lateral and vertical bracing in the walls around the employee toilet rooms. DIVISION 5 – METALS

  • Walls 12 Developer shall provide rustication patterns on all walls, except drainage headwalls, in Aesthetic 13 Area 3 in accordance with Exhibit L2.24 of the LAADCR. The final designs shall resemble these 14 simulations.

  • Glazing All new and replacement exterior windows shall have sealed, low emmissivity, insulating glass units which are manufactured by members of SIGMA and IGCC. Sealed insulating glass shall meet ASTM E774, class B. Glass shall be hermetically dual sealed, inert gas filled, double pane units with exterior 3/16” bronze float glass (IoE second surface), ½” air space, and interior 3/16” clear float glass. Insulated panels, if used, shall be 1” laminated panels equal to Xxxxx Industries architectural panels with a porcelain fused-on finish. Wired or clear fire-rated glass shall be UL approved. Safety glass shall be tempered or laminated, and shall meet ANSI 297.1 standard.

  • Fences Except for establishment cost incurred by the United States and replacement cost not due to the Landowner’s negligence or malfeasance, all other costs involved in maintenance of fences and similar facilities to exclude livestock are the responsibility of the Landowner. The installation or use of fences which have the effect of preventing wildlife access and use of the Easement Area are prohibited on the Easement Area, easement boundary, or on the Landowner’s land that is immediately adjacent to, and functionally related to, the Easement Area.

  • Roof Any leaks or evidence of moisture? Yes No Unknown Type of Roof: Age Comments: Is there any existing fire retardant treated plywood? Yes No Unknown Comments:

  • Toilets Papers, dust, cobwebs, peels, cans/bottles, cigarette butts, excrement on floor, bad smells, water pools, leaking sewage, rodents, animals (dead or alive), overflowing sanitary bins. 0 = NOT APPLICABLE 1 = UNACCEPTABLE (Toilets out of order. Toilets not cleaned on daily basis.) 2 = POOR (Toilets cleaned, but still visible signs of dirt, e.g. dust, cobwebs.) 3 = GOOD (Obvious sign that toilets are cleaned daily.) 4 = EXCELLENT (Extra effort is put in to ensure cleanliness, e.g. using detergents.)

  • Exterior and interior functional areas and spaces of the Project, with technical and equipment requirements on each;

  • Ceilings 13.1 Lambdaboard ceilings, minimum 25mm thick with a width of 1220mm x 1800mm, skimmed with Plascon EZ Joint and EZ Skim system.

  • Fencing The SPD shall Fence the demarcated boundary of the Demised Premises at the SPD’s own expense in every respect.

  • Structural (i) Structural floor plans and sections with detailing well advanced.

Time is Money Join Law Insider Premium to draft better contracts faster.