Magnetic Flowmeter Sample Clauses

Magnetic Flowmeter. The magnetic flowmeter shall be a completely obstructionless, in-line flowmeter with no constrictions in the flow of fluid through the meter. The meter shall consist of a metallic tube with flanged ends and with grounding rings. Flange diameter and bolt drilling pattern shall comply with ANSI/ASME B16.5, Class 150. Flangeless wafer insert style meters may be used for pipe sizes up to 6 inches, where compatible with adjacent piping flanges. Meters shall be suitable for the maximum range of working pressures of the adjacent piping. Self-cleaning, by ultransonic, bullet-nosed electrodes shall be provided for all meters used for sludge metering. Electrode’s for the magnetic Flowmeter shall be 316 stainless steel. Magnetic Flowmeter liner materials shall be fully compatible with the process fluid and shall comply with the requirements specified in the Instrument Device Schedules. Each meter shall be factory calibrated, at a facility, which is traceable to NIST or other standard acceptable to the JEA, and a copy of the calibration report shall be submitted as part of the operation and maintenance manual submittal. The meter shall be capable of standing empty for extended periods of time without damage to any components. The meter housing shall withstand submergence in 30 feet of water for 48 hours without damage.