KEYPAD INSTALLATION Clause Samples

KEYPAD INSTALLATION. Install the Keypad in a convenient location. The Model 906 Keypad may be mounted on a table top or on the wall. Place the Keypad in a location where the cord from the wall-mount transformer will not be accessible to children or present a safety hazard. The installation loca- tion must be within 5 feet of an AC power outlet so that the cord may reach the Keypad. Place the Keypad in the enclosed plastic wall mounting bracket, if needed. Place at the desired mounting location on a table top or wall and mark the position. Slide the Keypad out of its mounting bracket and attach the bracket using screws supplied. Once the screws are screwed in flush with back of bracket, slide Keypad into bracket. The Keypad is easily removed, if necessary. Only the Keypad needs an AC outlet for the wall mount transformer, which powers both the Model 906 Keypad and the Remote Display(s). Optional Mounting for Model 906 Keypad Install the Keypad and connect to AC power. Do not attach the cable that runs to the Remote Display(s) yet. Test for operation by entering a number and observing this number in the Keypad's display. This verifies that the system is working. If the unit did not work, refer to the Troubleshooting section. Now turn power "OFF."