Step No 1 Step No. 2
BILL NO 09 METALWORK 1 Single gate, size 900mm wide x 2050mm high, the leaf formed of 25 x 25 x 2mm wall thickness mild steel pipe framing all round and two horizontal intermediate rails with mitred and welded angles, the gate filled in with 12mm diameter mild steel bars welded, at each end, vertically to perimeter and intermediate framing at not exceeding 109mm centres, the leaf fitted with a 150mm long padbolt, the leaf to receive hasp and staple formed of 40 x 6mm mild steel flat bar welded onto frames and including fitting with two 50 x 10mm flat bar tee brackets and 16mm round bar pin hinges, twice bolted to wall with and including M16 x 95mm galvanised coach screws. No 6 A1 : 2 C1 : 1 D1 : 2 G1 : 1 H1 : 0 2 Mesh screen, size 2230mm wide x 2100mm high, formed of 32 x 32 x 2mm wall thickness square hollow section framing all round and two horizontal rails with mitred and welded angles, the framing covered with 50 x 50 x 4mm weld mesh tack welded on, and including fitting with two 50 x 10mm flat bar tee brackets and 16mm round bar pin hinges, twice bolted to wall with and including M16 x 95mm galvanised coach screws. No 1 A1 : 0 C1 : 1 D1 : 0 G1 : 0 H1 : 0 BUILDING WORKS
Contract No ▇▇▇▇▇▇▇ acknowledges and understands awards under this Contract are subject to federal funding to HHSC to facilitate the WIC program. All expenditures under the Grant Agreement will be in accordance with Attachment A, Statement of work.
YES NO If the answer is YES or if this disbursement uses the remainder of your OPWC assistance, your project file will be closed upon processing this request. As described in Appendix D of the Project Agreement, your minimum Percentage Contribution is 25% of the total project cost. PROJECT MANAGER CERTIFICATION: ▇▇▇▇ ▇▇▇▇▇▇▇, Executive Director
Agreement No SC11990054 Sheet 11 of 28