Frame Construction Sample Clauses
Frame Construction. All frames to be suitably reinforced and braced to permit the loading, shipping, unloading and rigging to the unit location and general handling of the completed sections without damage to external or internal components or misalignment of factory assembled components due to normal handling techniques. Unit is frameless, made with unitized construction consisting of bent and welded panels for strength, as is referred to highlighted “self-framing” construction note below. Lifting lugs shall be provided on the base on the corners of each section of the air handling unit. For hanging if required. Actually, unit is equipped with a pair of permanently attached formed base channels, suitable for lifting, hanging or bolting in place.
Frame Construction. A. Frames shall be formed from 14 gage cold rolled, galvannealed, or galvanized steel materials as noted in section 2.01.
B. Frames shall have 2" face jambs and heads unless noted otherwise.
C. Frames shall have mitered corners and shall be of welded construction. Welded frames shall be supplied with face welding only and ground smooth.
D. 1 3/4” door frames shall have 9-gauge hinge reinforcements and an equivalent 10 gauge strike reinforcements. Frames for 1-3/8" doors shall have 14 gage hinge reinforcements and 14-gauge strike reinforcements.