Dyax Sample Clauses

Dyax. Dyax shall be responsible for, and shall use Commercially Reasonable and Diligent Efforts in carrying out, the following activities in furtherance of the co-development and co-commercialization of the Co-Development Product (the “Dyax Co-Development Activities”): conducting and managing any Phase I Clinical Trials, Phase II Clinical Trials and Phase III Clinical Trials of the Co-Development Product worldwide; manufacturing or having manufactured by a Third Party the Co-Development Product; Marketing the Co-Development Product in the Dyax Territory; prosecuting, maintaining and enforcing the Dyax Co-Development Product Patent Rights in accordance with Clauses 5.3 and 5.4 below; cooperating with and providing reasonable support to CAT in CAT’s performance of the CAT Co-Development Activities; and performing any other activities or duties as may be assigned to Dyax by the Steering Committee.
AutoNDA by SimpleDocs
Dyax. Affimed has a royalty free cross-licensing agreement for the use of their phage display technology. In return, Dyax has the right to use our IgM library IP for the generation of IgM-based libraries. The rights to make or use such a library cannot be transferred to a third party. SCHEDULE 1.34
Dyax. Dyax shall bear its own costs and expenses incurred in preparing, filing, prosecuting, defending and/or maintaining those Dyax Patent Rights and Fovea Patent Rights (but not Joint Patent Rights) that Dyax actually prepares, files, prosecutes, defends and/or maintains after implementing and giving full effect to the provisions of Section 8.3(a) above.

Related to Dyax

  • Licensee Licensee represents and warrants that:

  • Licensor any Person from whom a Grantor obtains the right to use any Intellectual Property. Lien: any Person’s interest in Property securing an obligation owed to, or a claim by, such Person, whether such interest is based on common law, statute or contract, including liens, security interests, pledges, hypothecations, statutory trusts, reservations, exceptions, encroachments, easements, rights-of-way, covenants, conditions, restrictions, leases, and other title exceptions and encumbrances affecting Property. Lien Waiver: an agreement, in form and substance satisfactory to Collateral Agent, by which (a) for any material Collateral located on leased premises, the lessor waives or subordinates any Lien it may have on the Collateral, and agrees to permit Collateral Agent to enter upon the premises and remove the Collateral or to use the premises to store or dispose of the Collateral; (b) for any Collateral held by a warehouseman, processor, shipper, customs broker or freight forwarder, such Person waives or subordinates any Lien it may have on the Collateral, agrees to hold any Documents in its possession relating to the Collateral as agent for Collateral Agent, and agrees to deliver the Collateral to Collateral Agent upon request; (c) for any Collateral held by a repairman, mechanic or bailee, such Person acknowledges Collateral Agent’s Lien, waives or subordinates any Lien it may have on the Collateral, and agrees to deliver the Collateral to Collateral Agent upon request; and (d) for any Collateral subject to a Licensor’s Intellectual Property rights, the Licensor grants to Collateral Agent the right, vis-à-vis such Licensor, to enforce Collateral Agent’s Liens with respect to the Collateral, including the right to dispose of it with the benefit of the Intellectual Property, whether or not a default exists under any applicable License.

  • API If the Software offers integration capabilities via an API, your use of the API may be subject to additional costs or Sage specific policies and terms and conditions (which shall prevail in relation to your use of the API). You may not access or use the API in any way that could cause damage to us or the Software, or in contravention of any applicable laws. We reserve the right in our sole discretion, to: (i) update any API from time to time; (ii) place limitations around your use of any API; and (iii) deny you access to any API in the event of misuse by you or to otherwise protect our legitimate interests.

  • Manufacturer A firm that operates or maintains a factory or establishment that produces on the premises, the materials or supplies obtained by the Contractor. Regular Dealer - A firm that owns, operates, or maintains a store, warehouse, or other establishment in which the materials or supplies required for the performance of the contract are bought, kept in stock, and regularly sold to the public in the usual course of business. A regular dealer engages in, as its principal business and in its own name, the purchase and sale or lease of the products in question. A regular dealer in such bulk items as steel, cement, gravel, stone, and petroleum products need not keep such products in stock, if it owns and operates distribution equipment for the products. Brokers and packagers are not regarded as manufacturers or regular dealers within the meaning of this section. North Carolina Unified Certification Program (NCUCP) - A program that provides comprehensive services and information to applicants for DBE certification, such that an applicant is required to apply only once for a DBE certification that will be honored by all recipients of USDOT funds in the state and not limited to the Department of Transportation only. The Certification Program is in accordance with 49 CFR Part 26. United States Department of Transportation (USDOT) - Federal agency responsible for issuing regulations (49 CFR Part 26) and official guidance for the DBE program. Forms and Websites Referenced in this Provision DBE Payment Tracking System - On-line system in which the Contractor enters the payments made to DBE subcontractors who have performed work on the project. xxxxx://xxxx.xxx.xxxxx.xx.xx/Vendor/PaymentTracking/ DBE-IS Subcontractor Payment Information - Form for reporting the payments made to all DBE firms working on the project. This form is for paper bid projects only. xxxx://xxx.xxxxx.xxx/doh/forms/files/DBE-IS.xls RF-1 DBE Replacement Request Form - Form for replacing a committed DBE. xxxx://xxxxxxx.xxxxx.xxx/projects/construction/Construction%20Forms/DBE%20MBE%20WBE %20Replacement%20Request%20Form.pdf SAF Subcontract Approval Form - Form required for approval to sublet the contract. xxxx://xxxxxxx.xxxxx.xxx/projects/construction/Construction%20Forms/Subcontract%20Approval %20Form%20Rev.%202012.zip JC-1 Joint Check Notification Form - Form and procedures for joint check notification. The form acts as a written joint check agreement among the parties providing full and prompt disclosure of the expected use of joint checks. xxxx://xxxxxxx.xxxxx.xxx/projects/construction/Construction%20Forms/Joint%20Check%20Notif ication%20Form.pdf Letter of Intent - Form signed by the Contractor and the DBE subcontractor, manufacturer or regular dealer that affirms that a portion of said contract is going to be performed by the signed DBE for the amount listed at the time of bid. xxxx://xxxxxxx.xxxxx.xxx/letting/LetCentral/Letter%20of%20Intent%20to%20Perform%20as%20 a%20Subcontractor.pdf

  • PRODUCT MANUFACTURER'S SUPPLIERS Only those dealers/distributors listed by the manufacturer will be considered authorized to act on behalf of the Product Manufacturer.

  • Licensed Products Lessee will obtain no title to Licensed Products which will at all times remain the property of the owner of the Licensed Products. A license from the owner may be required and it is Lessee's responsibility to obtain any required license before the use of the Licensed Products. Lessee agrees to treat the Licensed Products as confidential information of the owner, to observe all copyright restrictions, and not to reproduce or sell the Licensed Products.

  • AMD to the Fixed Interest Account, beginning with the date of such transfer, shall be credited with the Current Rate of Interest under this contract which was in effect on the date the transferred contribution was originally deposited into the Fixed Interest Account under the previous AUL contract.

  • Licensed Product “Licensed Product” shall mean any article, composition, apparatus, substance, chemical material, method, process or service whose manufacture, use, or sale is covered or claimed by a Valid Claim within the Patent Rights. For clarity, a “Licensed Product” shall not include other product or material that (a) is used in combination with Licensed Product, and (b) does not constitute an article, composition, apparatus, substance, chemical material, method, process or service whose manufacture, use, or sale is covered or claimed by a Valid Claim within the Patent Rights.

  • Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.

  • Sublicensees Licensee shall have the full right (but not the obligation) to sublicense those rights granted to it under Section 2.1 to a Third Party (a “Sublicensee”); provided, however, that, prior to the payment of the first milestone pursuant to Section 7.2, Licensee may not grant any such sublicense to any contract research organization conducting Clinical Trials of Products or any Third Parties conducting contract Manufacturing activities without Licensee’s prior written notice (at least twenty (20) Business Days in advance) to Lilly, which shall include a description of the rights to be granted and the purpose therefor, the identity of the Third Party and the countries involved, and Lilly’s prior written consent, but such consent shall only be required (i) until such time as Licensee is the holder of record for the Regulatory Materials related to Taladegib and (ii) to the extent such organization is not performing services for Licensee as of the Effective Date; and provided further, that Licensee shall remain responsible for the performance by any of its Sublicensees. With respect to any Sublicensee granted a sublicense to any Commercialization rights hereunder, Licensee shall ensure that each of its Sublicensees accepts in writing all applicable terms and conditions of this Agreement, including the non-compete, reporting, audit, inspection and confidentiality provisions hereunder. Each Sublicensee shall also be prohibited from further sublicensing. For the avoidance of doubt, (a) Licensee will remain directly responsible for all amounts owed to Lilly under this Agreement, and (b) each Sublicensee is subject to the negative and restrictive covenants set forth in Sections 2.3.1 and 2.5, respectively. Licensee hereby expressly waives any requirement that Lilly exhaust any right, power or remedy, or proceed against a subcontractor, for any obligation or performance hereunder prior to proceeding directly against Licensee.

Time is Money Join Law Insider Premium to draft better contracts faster.