Drums. The pressure parts will be designed in accordance with the requirements of the ASME Code Section 1. HP, IP and LP steam drums will be provided with removable primary and/or secondary steam separators to provide suitable steam purity. An isokinetic sample point will be provided in the steam line from the drums. The upper steam drums will be provided with internal distribution piping for feedwater, blowdown, and chemical feed. The upper steam drums will be provided with the following minimum connections: o Level control device o Safety valves o Feedwater inlet o One water level gauge complete with drain valve and three level transmitters (The water gage and each transmitter are individually isolatable.) -------------------------------------------------------------------------------- Proprietary Information Page 3 AES IRONWOOD CONTRACT FINAL ISSUE - OCTOBER 30, 1998 -------------------------------------------------------------------------------- o Vents o Blowdown connections o Steam outlet o Pressure gauge o Chemical feed o Nitrogen filling connection o Connections as necessary for the CT Rotor Cooling Air System and Fuel Gas Preheating System The steam, water and mud drums will have manholes at each end. The lower drums (if furnished) will have provisions for intermittent blowdown and drains. The design of drum internals will provide uniform distribution of chemicals and uniform removal of blowdown water, and will prevent the under flow of steam which would otherwise interfere with boiler circulation.
Drums. Xxxx XxXxxxxxxx is a SONOR sponsored Artist. Details of his own special drum set can be received from: SONOR in USA: Xxxxx Xxxxxxx, Artist Relations Email: xxxxxxxx@xxxxxxxxx.xxx Tel: (000) 000-0000 SONOR in Europe: Xxxxxx Xxxxx, Artist Relations Manager Email: X.Xxxxx@Xxxxx.xx Tel +00 (0) 0000-00000 SONOR drums are always the drums of choice, unless they cannot be provided to Jack’s specifications. IF necessary, Gretsch, Yamaha, Tama and Pearl high-end sets, with Jack’s specifications, would be acceptable. PLEASE CHECK WITH TOUR MANAGER OR ARTIST REPRESENTATIVE FIRST. In special circumstances, an exceptional set not listed herein may be acceptable, SUBJECT TO JACK’S APPROVAL. XXXX XXXXXXXXXX WILL BRING HIS OWN CYMBALS COATED HEADS ON ALL DRUMS including bass drum – aquarian xxxxxxxxxx signature or remo ambassador . NO HOLE IN BASSDRUM, NO DAMPING RINGS ON HEADS OR PADDING INSIDE. (One) 1 Drum Experienced Drum Technician to set-up drum set when loaded into venue. One (1) set of SONOR Designer, Hi-Lite or SQ2 drums to include: o One (1) 18” Bass Drum with uncut drum heads (20” is also acceptable) o Four (4) Mounted Xxx Drums: 8”, 10”, 12” and 13” o Two (2) Floor Xxx Drums: 14” and 16” with legs o One (1) Snare Drum, mid-sized with drum stand • Hardware:One (1) Bass Drum Pedal o One (1) Bass Drum Xxx Mount o Two (2) Xxx Stands with Four (4) Mounting Brackets o One (1) Hi-Hat Stand o Seven (7) Boom-style Cymbal Stands Drum Key • One (1) Adjustable Roc-N-Soc Drum Throne with bicycle seat and back rest o NOTE: this item is NOT provided by Sonor • One (1) 6’ x 6’ Drum Carpet Piano One (1) Concert Grand Piano, tuned to A-440 or A-442 (please specify which) pitch prior to soundcheck and again before concert. Bass Carved double bass of professional quality and with professional set up for jazz, and an endpin capable of extending at least 30 cm. Two quality bows, one German, one French Preferred strings: Original Flexocor-G only) Thomastik Spirore: D,A and E- OR complete set of Xxxx Xxxxxxx (preferred). Preferred pickup: Xxxxx Xxxx Realist Quality clip on microphone for mounting on the bass. One High Quality Active Direct Box-BSS AR-133 or similar Bass Amplifier First choice-Xxxxxxx Xxxxxxx MBE 150 w/ 4 x 10” cabinet by Xxxxxxx Xxxxxxx or Eden or similiar Second choice Xxxxxxx Xxxxxxx 400RB or 800RB w/ 4 x 10” cabinet by Xxxxxxx Xxxxxxx or Eden Cello Carved cello and bow of professional quality and with professional set up. Quality condenser mic for cello Miscellane...
Drums. Please mic according to the standard choices at your venue for this instrument in your space.
Drums. The Project Definition will require the acquisition by Seller from Buyer’s Affiliate Orica Canada Inc. (“OCI”) and installation of two IGAN dryer drums and associated equipment more particularly itemized in Exhibit B hereto (the “Drums”). Seller agrees to inspect the Drums promptly after the Effective Date and, subject to the results of such inspection, Seller agrees to purchase, and Buyer shall cause OCI to supply and arrange for delivery to the Site of such Drums at a time mutually acceptable to Seller and OCI. Buyer shall bear the risk or loss or damage to the Drums prior to their delivery to the Site. The purchase price for the Drums will be an amount equal to the sum of OCI’s book values for the Drums as of the date of OCI’s most recent balance sheet prior to the Effective Date, plus the cost of loading and transporting the Drums to the Site. Such aggregate amount will be included in the Conversion Project Capital Budget and paid in cash by Seller to OCI within thirty (30) days from the arrival of the Drums at the Plant.
Drums. One (1) complete studio quality jazz Drum Set (Drum make in order of preference : Yamaha (Maple Custom or Maple Absolute, NO Recording Custom), Gretsch; Xxxxxx). Though difficult to find, vintage kit of the following brands: Camco, Xxxxxxxxxxx, Gretsch or Xxxxxx would be very much appreciated. Size of the drum including the depth is essential. Please Note: NO ROCK DRUMS/NO HOLE IN FRONT HEAD OF THE BASS DRUM, NO FILLING IN THE BASS DRUM TOP HEADS: First choice of head type: FYBERSKIN; 2nd choice: Coated Ambassador BOTTOM HEADS: CLEAR REMO DIPLOMAT 2 (two) rack toms (10" x 8" and 12" x 8") 1 (one) floor xxx (14" x 14") 1 (one) bass drum (18" x 14") 1 (one) wood (no oak) snare drum (14” x 5”) 1 (one) snare drum (14” x 6.5” or 7") 3 (three) cymbal stands 2 (two) snare drum stands 1 (one) hi hat stand 1 (one) drum throne/seat 1 (one) bass drum pedal (Yamaha preferred or DW5000) with an all felt beater
Drums. 1. If drums are utilized for the collection of decontamination rinse water, these drums are the responsibility of the Contractor and shall be loaded and transported to an approved and permitted waste disposal facility, as arranged by the Contractor.
Drums. Please mic according to the standard choices at your venue for this instrument in your space. MONITORS: Five individual monitors with individual monitor mixes MUSIC STANDS: Four heavy-duty non-folding black music stands with lights SMALL TABLE: For putting water, reeds, etc WATER & TOWELS: 10 bottles of water and 5 towels on stage Contact Info: In case of any questions, please contact: Xxxx Xxxxx xxxxxxxxx@xxxxx.xxx +0.000.000.0000 AGREED AND ACCEPTED: PURCHASER DATE ARTIST OR REPRESENTATIVE OF ARTIST
Drums. “Hub-piloted” type outboard mounted brake drums. Or prior approved equal. Wheels:
Drums. “Hub-piloted” type outboard mounted brake drums. Or prior approved equal. Wheels: Tires: Front 385/65R22.5, eighteen ply steel belted radials, rear 12R 22.5 sixteen. Highway steer type front and mud/snow type “open sidewall” tread type rear or prior approved equal. Front tire to be applicable to optional front drive system. Tires must be speed rated to the specifications of the truck. Or prior approved equal.
Drums. One (1) six piece YAMAHA or equivalent kit* 1 - 22" Kick 2 - 14" x 5 1/2" Snare
