Common use of COVERAGE AND DEFINITIONS Clause in Contracts

COVERAGE AND DEFINITIONS. THIS AGREEMENT shall apply to and cover the construction, installation, treating, reconditioning, taking-up, re-bevelling, re-laying, relocating, double-jointing or testing of all distribution pipe- lines or any segments thereof transporting gas, oil, vapours, liquids, slurries, solids, or other transportable materials and underground and marine cables and all work incidental thereto and an integral part thereof coming within the jurisdiction of the Union, contracted for or per- formed by the Employer within Canada as such work is more fully described below and illustrated in the accompanying charts. By mutual agreement this contract may be extended to cover other territory. A. DISTRIBUTION PIPELINES shall include: All pipelines for distribution of gas, oil, and/or products and water which are downstream from the first metering station or connection or the town border station and up to the industrial, commercial, or institu- tional meter. All service lines including portions of such pipelines within private property boundaries up to and including the domestic meter, and the first joint or connection through the wall. Distribution piping could be manufactured from iron, steel, aluminum, copper, brass, plastic or any other material which might be substituted for the aforementioned. Pipelines constructed as underground cable conduits downstream from town border sta- tions to industrial, commercial, institutional, and residential meters. Pipelines for pressurized liquids or slurries within the limits of cities or towns, other than service lines or laterals, the construc- tion of which employs the same or similar methods, equipment or organization as used in performing the work described above. All pipelines diameter and under. EXCLUSIONS from the coverage of this Agreement shall be: pipelines as defined in and covered by the Teamsters Mainline Pipeline Agreement for Canada. Such pipeline installation, repair, main- tenance, replacement or reconditioning, more particularly and usually defined as Industrial, Commercial, Institutional or Building Construction, as may not be combined with or comprising an integral part of pipeline construction. The Employer recognizes that the work excluded in B above is covered by other agreements and agrees. to be bound by the applicable Union agreement on any such work. DEFINITIONS of terms contained in and for purposes of this Agreement shall include: "First metering station or connection" means that point which divides mainline transmission lines or higher pressure lateral and branch lines from lower pressure distribution systems. If a metering station or connection is located on a mainline transmission line, then the mainline pipeline construction includes the construction of all pipelines up to the point at which lower pressure distri- bution systems take off from higher pressure lateral and branch lines. This definition shall be interpreted as being subject to the definition of distribution work as contained herein. border station" means that point at which deliveries to the distribution systems begin and are transformed, metered, or measured. E. All reference in this Agreement to the masculine gender shall apply also to the feminine gender.

COVERAGE AND DEFINITIONS. THIS AGREEMENT shall apply to and cover the construction, installation, treating, reconditioning, taking-up, re-bevelling, re-laying, relocating, double-jointing or and/or testing of all distribution pipe- lines systems or any segments thereof thereof, including marine pipelines, transporting gas, oil, vapours, liquids, slurries, solids, or other transportable materials and underground and marine cables and all work incidental thereto and or an integral part thereof coming within the jurisdiction of the Union, contracted for or per- formed performed by the Employer within Canada as such work is more fully described below and illustrated in the accompanying chartsbelow. By mutual agreement this contract This Agreement may be extended to cover other territory▇▇▇▇▇- ▇▇▇▇. A. DISTRIBUTION PIPELINES SYSTEMS shall include: All pipelines for distribution of gas, oil, and/or products and water which are downstream from the first metering station or connection or the town border station and up to the industrial, commercial, or institu- tional meter. All service lines including portions of such pipelines within private property boundaries up to and including the domestic meter, and the first joint or connection through the wall. Distribution piping could be manufactured from iron, steel, aluminum, copper, brass, plastic or any other material materials which might be substituted for the aforementionedafore- mentioned. Oil and gas gathering lines which connect directly from the well to the mainline or to or from pro- ducts extraction or processing plants. Pipelines constructed as underground cable conduits downstream from town border sta- tions to stations or industrial, commercial, institutional, and residential meters. Pipelines for or pressurized liquids or slurries within the limits of cities or towns, other than service lines or laterals, the construc- tion construction of which employs the same or similar methods, equipment or organization as used in performing the work described above. All pipelines diameter and under. EXCLUSIONS from the coverage of this Agreement shall be: Mainline pipelines as defined in and covered by the Teamsters Operating Engineers Mainline Pipeline Agreement for Canada. Such pipeline installation, repair, main- tenancemaintenance, replacement or reconditioning, reconditioning more particularly and usually defined as Industrial, Commercial, Institutional or Building Construction, Construction as may not be combined with or comprising an integral part of pipeline construction. The Employer recognizes that the work excluded in B above is covered by other agreements and agrees. agrees to be bound by the applicable Union agreement on any such work. DEFINITIONS of terms contained in and for purposes of this Agreement shall include: ": I. First metering station or connection" means that point which divides mainline transmission lines or higher pressure lateral and branch lines from lower pressure distribution systems. If a metering station or connection is located on a mainline transmission line, then the mainline pipeline construction includes the construction of all pipelines up to the point at which lower pressure distri- bution distribution systems take off from higher pressure lateral and branch lines. This definition shall be interpreted as being subject to the definition of distribution work as contained herein. "Town border station" means that point at which deliveries to the distribution systems begin and are transformed, metered, or measured. E. All reference in this Agreement to the masculine gender shall apply also to the feminine gender.

COVERAGE AND DEFINITIONS. THIS AGREEMENT shall apply to and cover the construction, installation, treating, reconditioning, taking-up, re-bevelling, re-re- laying, relocating, stockpiling, double-jointing or testing of all distribution pipe- lines systems or any segments thereof thereof, including marine transporting gas, oil, vapours, liquids, slurries, solids, or other transportable materials and underground and marine cables and all work incidental thereto and or an integral part thereof coming within the jurisdiction thejurisdiction of the Union, contracted for or per- formed performed by the Employer within Canada as such work is more fully described below and illustrated in the accompanying chartsbelow. By mutual agreement this contract This Agreement may be extended to cover other territory.other A. DISTRIBUTION PIPELINES SYSTEMS shall include: All pipelines for distribution of gas, oil, and/or products and water which are downstream from the first metering station or connection or connectionor the town border station and up to the industrial, commercial, or institu- tional institutional meter. All service lines including portions of such pipelines within private property boundaries up to and including the domestic meter, and the first joint or connection through the wall. Distribution piping could be manufactured from iron, steel, aluminum, copper, brass, plastic or any other material materials which might be substituted for the aforementioned. Oil and gas gathering lines which connect directly from the well to the mainline or to or from products extraction or processing plants. Pipelines constructed as underground cable conduits downstream from town border sta- tions to stations or industrial, commercial, institutional, and residential meters. Pipelines for or pressurized liquids or liquidsor slurries within the limits of cities or towns, other than service lines or laterals, the construc- tion construction of which employs the same or similar methods, equipment or organization as used in performing the work described above. All pipelines 6" diameter and under. EXCLUSIONS from the coverage of this Agreement shall be: Mainline pipelines as defined in and covered by the Teamsters Operating Engineers Mainline Pipeline Agreement for Canada. Such pipeline installation, repair, main- tenancemaintenance, replacement or reconditioning, reconditioning more particularly and usually defined as Industrialindustrial, Commercial, Institutional or Building Construction, Construction as may not be combined with or comprising an integral part of pipeline construction. The Employer recognizes that the work excluded in B above is covered by other agreements and agrees. agrees to be bound by the applicable Union agreement on any such work. DEFINITIONS of terms contained in containedin and for purposes of this Agreement shall include: "First metering station or connection" means that point which divides mainline transmission lines or higher pressure lateral and branch lines from linesfrom lower pressure distribution systems. If if a metering station or connection is located on a mainline transmission line, then the mainline pipeline construction includes the construction of all pipelines up to the point at which lower pressure distri- bution distribution systems take off from higher pressure lateral and branch lines. This definition shall be interpreted as being subject to the definition of distribution work as contained herein. "Town border station" means station"means that point at which deliveries to the distribution systems begin and are transformed, metered, or measured. E. All reference in this Agreement to the masculine gender shall apply also to the feminine gender.

COVERAGE AND DEFINITIONS. THIS AGREEMENT shall apply to and cover the construction, installation, treating, reconditioning, taking-up, re-bevelling, re-laying, relocating, double-stockpiling, jointing or testing of all distribution pipe- lines pipelines or any segments thereof thereof, including marine pipelines, transporting gas, oil, vapours, liquids, slurries, solids, or other transportable materials and underground and marine cables and all work incidental thereto and an integral part thereof coming within the jurisdiction of the Union, contracted for or per- formed performed by the Employer within Canada as such work is more fully described below and illustrated in the accompanying chartsbelow. By mutual agreement this contract may be extended to cover other territory. A. . DISTRIBUTION PIPELINES shall include: All pipelines for distribution of gas, oil, and/or products and water which are downstream from the first metering station or connection or the town border station and up to the industrial, commercial, or institu- tional institutional meter. All service lines including portions of such pipelines within private property boundaries up to and including the domestic meter, and the first joint or connection through the wall. Distribution piping could be manufactured from iron, steel, aluminum, copper, brass, plastic or any other material materials which might be substituted for the aforementioned. Oil and gas gathering lines which connect directly from the well to the mainline or to or from products extraction or processing plants. Pipelines constructed as underground cable conduits downstream from town border sta- tions stations to industrial, commercial, institutional, and residential meters. I Pipelines for pressurized liquids or slurries within the limits of cities or towns, other than service lines or laterals, the construc- tion construction of which employs the same or similar methods, equipment or organization as used in performing the work described above. All pipelines 6" diameter and under. under EXCLUSIONS from the coverage of this Agreement shall be: Mainline pipelines as defined in and covered by the Teamsters Mainline Pipeline Agreement Agreements for Canada. Such pipeline installation, installation repair, main- tenancemaintenance, replacement or reconditioning, more particularly and usually defined as Industrial, Commercial, Institutional or Building Construction, as may not be combined with or comprising an integral part of pipeline construction. The Employer recognizes that the work excluded in B above is covered by other agreements and agrees. agrees to be bound by the applicable Union agreement on any such work. DEFINITIONS of terms contained in and for purposes of this Agreement shall include: "First metering station or connection" means that point which divides mainline transmission lines or higher pressure lateral and branch lines from lower pressure distribution systems. If a metering station or connection is located on a mainline transmission line, then the mainline pipeline construction includes the construction of all pipelines up to the point at which lower pressure distri- bution systems take off from higher pressure lateral and branch lines. This definition shall be interpreted as being subject to the definition of distribution work as contained herein. border station" means that point at which deliveries to the distribution systems begin and are transformed, metered, or measured. E. All reference in this Agreement to the masculine gender shall apply also to the feminine gender.:

COVERAGE AND DEFINITIONS. THIS AGREEMENT shall apply to and cover the construction, installation, treating, reconditioning, taking-up, re-bevelling, re-laying, relocating, double-stockpiling, jointing or testing of all distribution pipe- lines pipelines or any segments thereof thereof, including marine pipelines, transporting gas, oil, vapours, liquids, slurries, solids, or other transportable materials and underground and marine cables and all work incidental thereto and an integral part thereof coming within the jurisdiction of the Union, contracted for or per- formed performed by the Employer within Canada as such work is more fully described below and illustrated in the accompanying chartsbelow. By mutual agreement this contract may be extended to cover other territory. A. . DISTRIBUTION PIPELINES shall include: All pipelines for distribution of gas, oil, and/or products and water which are downstream from the first metering station or connection or the town border station and up to the industrial, commercial, or institu- tional institutional meter. All service lines including portions of such pipelines within private property boundaries up to and including the domestic meter, and the first joint or connection through the wall. Distribution piping could be manufactured from iron, steel, aluminum, copper, brass, plastic or any other material materials which might be substituted for the aforementioned. Oil and gas gathering lines which connect directly from the well to the mainline or to or from products extraction or processing plants. Pipelines constructed as underground cable conduits downstream from town border sta- tions stations to industrial, commercial, institutional, and residential meters. Pipelines for pressurized liquids or slurries within the limits of cities or towns, other than service lines or laterals, the construc- tion construction of which employs the same or similar methods, equipment or organization as used in performing the work described above. All pipelines 6" diameter and under. I EXCLUSIONS from the coverage of this Agreement shall be: Mainline pipelines as defined in and covered by the Teamsters Mainline Pipeline Agreement Agreements for Canada. Such pipeline installation, installation repair, main- tenancemaintenance, replacement or reconditioning, more particularly and usually defined as Industrial, Commercial, Institutional or Building Construction, as may not be combined with or comprising an integral part of pipeline construction. The Employer recognizes that the work excluded in B above is covered by other agreements and agrees. agrees to be bound by the applicable Union agreement on any such work. DEFINITIONS of terms contained in and for purposes of this Agreement shall include: "First metering station or connection" means that point which divides mainline transmission lines or higher pressure lateral and branch lines from lower pressure distribution systems. If a metering station or connection is located on a mainline transmission line, then the mainline pipeline construction includes the construction of all pipelines up to the point at which lower pressure distri- bution systems take off from higher pressure lateral and branch lines. This definition shall be interpreted as being subject to the definition of distribution work as contained herein. border station" means that point at which deliveries to the distribution systems begin and are transformed, metered, or measured. E. All reference in this Agreement to the masculine gender shall apply also to the feminine gender.:

COVERAGE AND DEFINITIONS. THIS AGREEMENT shall apply to and cover the construction, installation, treating, reconditioning, taking-up, re-bevelling, re-laying, relocating, double-double jointing or and/or testing of all distribution pipe- lines pipelines or any segments thereof transporting gas, oil, . vapours, liquids, slurries, solids, or other transportable materials and underground and marine cables and all work incidental thereto and or an integral part thereof coming within the jurisdiction of the Union, contracted for or per- formed performed by the Employer within Canada as such work is more fully described below and illustrated in the accompanying chartsbelow. By mutual agreement this contract This Agreement may be extended to cover other territory. A. DISTRIBUTION . MAINLINE PIPELINES shall include: All Cross-country pipelines for distribution of gas, oil, and/or products and water which are downstream from the first metering station or connection or the town border station and up to the industrial, commercial, or institu- tional meter. All service lines including portions of such pipelines within private property boundaries up which are an integral part of the pipeline system. Pipelines to and including the domestic meter, and the first joint or connection through the wall. Distribution piping could be manufactured from iron, steel, aluminum, copper, brass, plastic or any other material which might be substituted for the aforementionedstorage facilities. Pipelines constructed as underground cable conduits downstream from between originating plant terminals and town border sta- tions to stations. Pipelines transporting water or slurries for irrigational, waste disposal, industrial, commercial, institutional, and institutional or residential metersuse. Pipelines for pressurized liquids or slurries within the limits of cities or towns, other than service process water supply or discharge lines and water or sewage laterals, the construc- tion construction of which employs the same or similar methods, equipment equipment, or organization as used in performing the work described above. All pipelines diameter SPECIAL WORK for which special provisions are contained in Article shall include: Take-up jobs (Salvage Pipe); Reconditioning; Marine or push jobs; River or bridge crossing; Highway relocation and undershort lines in congested Double jointing racks (Automatic Type Welding); Road boring, casing, and cable Micro wire welding machines; pipe; shall be: Laying pipe other than steel; Automatic line welding; Heat tracing, cooling systems, or demagnetizing of Camp maintenance; Underwater work: Pipe supports; Prefabrication; Original assignment; High Impact process; Welding Quality Control; Minor Projects. EXCLUSIONS from the coverage of this Agreement shall be: Distribution pipelines as defined in and covered by the Teamsters Mainline United Association Distribution Pipeline Agreement for Canada. Such pipeline installation, repair, main- tenancemaintenance, replacement or reconditioning, reconditioning more particularly and usually defined as Industrial, Commercial, Institutional or Building Construction, Construction as may not be combined with, associatied with or comprising an integral part of pipeline construction. Such non-destructive testing as may be combined with, associated with or an integral part of work described in Art. above. The Employer recognizes that the work excluded in B above is covered by other agreements and agrees. agrees to be bound by the applicable Union agreement on any such work. Appendix is a voluntary Agreement, which the individual Employer and the Union, who are both parties hereto, shall each have the option to sign an acceptance of Appendix which is attached to and forms part of this Agreement, to cover the performance of work referred to in Art. above. DEFINITIONS of terms contained in and for the purposes of this Agreement shall include: "First metering station or connection" means that point which divides mainline transmission lines or higher pressure lateral and branch lines from lower pressure distribution systems. If a metering station or connection is located on a mainline transmission line, then the mainline pipeline construction includes the construction of all pipelines up to the point at which the lower pressure distri- bution distribution systems take off from higher pressure lateral and branch lines. This definition shall be interpreted as being subject to the definition of distribution work as contained herein. "Town border station" means that point at which deliveries to the distribution systems begin and are transformed, metered, or measured. E. All reference in this Agreement to the masculine gender shall apply also to the feminine gender.

COVERAGE AND DEFINITIONS. THIS AGREEMENT shall apply to and cover the construction, installation, treating, reconditioning, taking-up, re-bevelling, re-re- laying, relocating, stockpiling, double-jointing or testing of all distribution pipe- lines pipelines or any segments thereof thereof, including marine pipelines, transporting gas, oil, vapours, liquids, slurries, solids, or other transportable materials and underground and marine cables and all work incidental thereto and an integral part thereof coming within the jurisdiction of the Union, contracted for or per- formed by the Employer within Canada as such work is more fully described below and illustrated in the accompanying chartsbelow. By mutual agreement this contract may be extended to cover other territory. A. I DISTRIBUTION PIPELINES shall include: All pipelines for distribution of gas, oil, and/or products and water which are downstream from the first metering station or connection or the town border station and up to the industrial, commercial, or institu- tional institutional meter. All service lines including portions of such pipelines within private property boundaries up to and including the domestic meter, and the first joint or connection through the wall. Distribution piping could be manufactured from iron, steel, aluminum, copper, brass, plastic or any other material materials which might be substituted for the aforementioned. Oil and gas gathering lines which connect directly from the well to the mainline or to or from products extraction or processing plants. Pipelines constructed as underground cable conduits downstream from town border sta- tions stations to industrial, commercial, institutional, and residential meters. Pipelines for pressurized liquids or slurries within the limits of cities or towns, other than service lines or laterals, the construc- tion construction of which employs the same or similar methods, equipment or organization as used in performing the work described above. All pipelines 6” diameter and under. EXCLUSIONS from the coverage of this Agreement shall be: Mainline pipelines as defined in and covered by the Teamsters Mainline Pipeline Agreement Agreements for Canada. Such pipeline installation, installation repair, main- tenancemaintenance, replacement or reconditioning, more particularly and usually defined as Industrial, Commercial, Institutional or Building Construction, as may not be he combined with or comprising an integral part of pipeline construction. The Employer recognizes that the work excluded in B above is covered by other agreements and agrees. agrees to be bound hound by the applicable Union agreement on any such work. DEFINITIONS of terms contained in and for purposes of this Agreement shall include: "“First metering station Metering Station or connection" means Connection” that point which divides mainline transmission lines or higher pressure lateral and branch lines from lower pressure distribution systems. If a metering station or connection is located on a mainline transmission line, then the mainline pipeline construction includes work shall include the construction of all pipelines up to the point at which lower pressure distri- bution distribution systems take off from higher pressure lateral and branch lines. This IT IS UNDERSTOOD that this definition shall be he interpreted as being subject to the definition of distribution work as contained herein. border station" means that point at which deliveries to the distribution systems begin and are transformed, metered, or measured. E. All reference in this Agreement to the masculine gender shall apply also to the feminine gender.

COVERAGE AND DEFINITIONS. THIS AGREEMENT shall apply to and cover the construction, installation, treating, reconditioning, taking-up, re-bevelling, re-laying, relocating, double-stockpiling, jointing or testing of all distribution pipe- lines pipelines or any segments thereof thereof, including marine pipelines, transporting gas, oil, vapours, liquids, slurries, solids, or other transportable materials and underground and marine cables and all work incidental thereto and an integral part thereof coming within the jurisdiction of the Union, contracted for or per- formed performed by the Employer within Canada as such work is more fully described below and illustrated in the accompanying chartsbelow. By mutual agreement this contract may be extended to cover other territory. A. . DISTRIBUTION PIPELINES shall include: All pipelines for distribution of gas, oil, and/or products . and water which are downstream from the first metering station or connection or the town border station and up to the industrial, commercial, or institu- tional institutional meter. All service lines including portions of such pipelines within private property boundaries up to and including the domestic meter, and the first joint or connection through the wall. Distribution piping could be manufactured from iron, steel, aluminum, copper, brass, plastic or any other material materials which might be substituted for the aforementioned. Oil and gas gathering lines which connect directly from the well to the mainline or to or from products extraction or processing plants. Pipelines constructed as underground cable conduits downstream from town border sta- tions stations to industrial, commercial, institutional, and residential meters. Pipelines for pressurized liquids or slurries within the limits of cities or towns, other than service lines or laterals, the construc- tion construction of which employs the same or similar methods, equipment or organization as used in performing the work described above. All pipelines 6" diameter and under. EXCLUSIONS from the coverage of this Agreement shall be: Mainline pipelines as defined in and covered by the Teamsters Mainline Pipeline Agreement Agreements for Canada. Such pipeline installation, installation repair, main- tenancemaintenance, replacement or reconditioning, more particularly and usually defined as Industrial, Commercial, Institutional or Building Construction, as may not be combined with or comprising an integral part of pipeline construction. The Employer recognizes that the work excluded in B above is covered by other agreements and agrees. agrees to be bound by the applicable Union agreement on any such work. DEFINITIONS of terms contained in and for purposes of this Agreement shall include: I "First metering station Metering Station or connectionConnection" means that point which divides mainline transmission lines or higher pressure lateral and branch lines from lower pressure distribution systems. If a metering station or connection is located on a mainline transmission line, then the mainline pipeline construction includes work shall include the construction of all pipelines up to the point at which lower pressure distri- bution distribution systems take off from higher pressure lateral and branch lines. This IT IS UNDERSTOOD that this definition shall be interpreted as being subject to the definition of distribution work as contained herein. "Town border station" means that point at which deliveries to the distribution systems begin and are transformed, metered, or measured. E. . All reference in this Agreement to the masculine gender shall apply also to the feminine gender.

COVERAGE AND DEFINITIONS. the THIS AGREEMENT shall apply to and cover the construction, installation, treating, reconditioning, taking-up, re-bevelling, re-laying, relocating, double-jointing or and/or testing of all distribution pipe- lines systems or any segments thereof thereof, including marine pipelines, transporting gas, oil, vapours, liquids, slurries, solids, or other transportable materials and underground and marine cables and all work incidental thereto and or an integral part thereof coming within the jurisdiction of the Union, contracted for or per- formed performed by the Employer within Canada as such work is more fully described below and illustrated in the accompanying chartsbelow. By mutual agreement this contract This Agreement may be extended to cover other territory. A. DISTRIBUTION PIPELINES SYSTEMS shall include: All pipelines for distribution of gas, oil, and/or products and water which are downstream from the first metering station or connection or the town border station and up to the industrial, commercial, or institu- tional meter. All service lines including portions of such pipelines within private property boundaries up to and including the domestic meter, and the first joint or connection through the wall. Distribution piping could be manufactured from iron, steel, aluminum, copper, brass, plastic or any other material materials which might be substituted for the aforementioned. Oil and gas gathering lines which connect directly from the well to the mainline or to or from products extraction or processing plants. Pipelines constructed as underground cable conduits downstream from town border sta- tions to or industrial, commercial, institutional, and residential meters. Pipelines for or pressurized liquids or slurries within the limits of cities or towns, other than service lines or laterals, the construc- tion of which employs the same or similar methods, equipment or organization as used in performing the work described above. All pipelines diameter and under. EXCLUSIONS from the coverage of this Agreement shall be: Mainline pipelines as defined in and covered by the Teamsters Operating Engineers Mainline Pipeline Agreement for Canada. Such pipeline installation, repair, main- tenance, replacement or reconditioning, reconditioning more particularly and usually defined as Industrial, Commercial, Institutional or Building Construction, Construction as may not be combined with or comprising an integral part of pipeline construction. The Employer recognizes that the work excluded in B above is covered by other agreements and agrees. agrees to be bound by the applicable Union agreement on any such work. DEFINITIONS of terms contained in and for purposes of this Agreement shall include: "First metering station or connection" means that point which divides mainline transmission lines or higher pressure lateral and branch lines from lower pressure distribution systems. If a metering station or connection is located on a mainline transmission line, then the mainline pipeline construction includes the construction of all pipelines up to the point at which lower pressure distri- bution systems take off from higher pressure high. lateral and branch lines. This definition shall be interpreted as being subject to the definition of distribution work as contained herein. border station" means that point at which deliveries to the distribution systems begin and are transformed, metered, or measured. E. All reference in this Agreement to the masculine gender shall apply also to the feminine gender.