Conveyor Sample Clauses

Conveyor. 8.04 Tenant shall deliver Coke into the Building via conveyor (the “Conveyor”) extending into the Building. The Conveyor and related fixtures are currently owned by and shall continue to be owned, operated, maintained and repaired by Tenant, who shall be solely responsible for operating, maintaining, repairing and replacing the Conveyor and related fixtures. Tenant reserves the right to remove the Conveyor and at any time during the term of this Lease. Tenant shall maintain the Conveyor in good repair, in accordance with Applicable Laws and the terms of this Lease, in a condition allowing Landlord to safely and efficiently perform its duties under the Coke Handling Agreement.
AutoNDA by SimpleDocs
Conveyor. Power Feed conveyor: 10' length x 33" wide rollers, 1 7/8 @ 2" spacing. This lot is located at 00 Xxxxxxxxxx Xxxxx, Xxxxxxxxxxxxx, XX Quantity: 1 17 Water Filter Amtrol water filter and tank system, 86 gallon, 44" H x 22" diameter, SN 13426013. This lot is located at 00 Xxxxxxxxxx Xxxxx, Xxxxxxxxxxxxx, XX Quantity: 1
Conveyor. Lot- Galv frame gravity feed roller conveyor, adjustable height, 1 1/2" diameter rollers @ 2" spacing: (2) 8' x 16", (1) 6' x 16", (2) 4' x 16". This lot is located at 00 Xxxxxxxxxx Xxxxx, Xxxxxxxxxxxxx, XX Quantity: 1 18 Vacuum Oven Xxxx-Xxxxxx StableTemp Vacuum oven model 05053-10, 0.7 cu ft (10" x 10" x 12" chamber), 95-428 degrees f, 120V, 5A, 600W, 50/60Hz, 1pl, with pump and stand. This lot is located at 00 Xxxxxxxxxx Xxxxx, Xxxxxxxxxxxxx, XX Quantity: 1 Blackbird Asset Services, LLC Xxxxxx Xxxxxx 9/29/2015 LOT # 19 Safe Diebold upright safe, 38" W x 24.5"deep x 70 3/4" height, two door. This lot is located at 00 Xxxxxxxxxx Xxxxx, Xxxxxxxxxxxxx, XX Quantity: 1 LOT # 24 Gearbox and Motor Lot- Gearbox and motor for Rotoflex - Reliance 7.5 HP motor, Catep type IB.222.N.300.2.SPL gearbox. This lot is located at 00 Xxxxxxxxxx Xxxxx, Xxxxxxxxxxxxx, XX Quantity: 1 20 Equipment Rack Great Lakes network equipment rack, 24" height, 24" deep, SN 06-11329, with 3COM 3300 xm switch 3C16985B superstack. This lot is located at 00 Xxxxxxxxxx Xxxxx, Xxxxxxxxxxxxx, XX Quantity: 1 25 Motor Simpletrol motor and drive, brand new. This lot is located at 00 Xxxxxxxxxx Xxxxx, Xxxxxxxxxxxxx, XX Quantity: 1 21 Heat Exchanger 2003 Kalte Xxxxxxxx plate style heat exchanger model GL-13P1-12, SN DE03-230994/1. This lot is located at 00 Xxxxxxxxxx Xxxxx, Xxxxxxxxxxxxx, XX Quantity: 1

Related to Conveyor

  • Generator Subject to the provisions of this Section 29.36, Tenant shall be entitled to install, operate and maintain a generator and any other equipment related thereto, including, without limitation, a fuel system, wiring and shaft space (“Generator”) next to the Building at Tenant’s sole cost and expense (without paying any additional fee or rental to Landlord for the use thereof). Prior to the installation of the Generator, Tenant shall inspect the proposed location to determine a suitable location for the Generator, and Tenant shall submit written plans and specifications relative to the type, size and proposed location (including any proposed screening) of the Generator to Landlord for its review and written approval. Tenant shall be solely responsible for the cost of acquisition, installation, operation, and maintenance of the Generator; and Tenant shall install, maintain and operate the Generator in accordance with all federal, state, and local laws, statutes, ordinances, rules and regulations, including without limitation, obtaining and maintaining any and all permits, approvals and licenses required to install and operate the Generator by any governmental authority having jurisdiction. Landlord and Tenant agree that, upon the expiration of earlier termination of the Lease Term, Tenant shall not be required to remove the Generator, any associated cabling, wiring and screening or other improvements. Tenant shall not be entitled to grant or assign to any third party (other than a permitted assignee of Tenant’s rights under the Lease or a permitted subtenant relative to the Premises (or a portion thereof)) the right to use the Generator without Landlord’s prior written consent (which consent may be granted or withheld in Landlord’s discretion). Upon reasonable advance notice to Tenant (and provided Landlord reasonably coordinates with Tenant and provides an alternate source of backup generator capacity during said transition), Landlord shall be entitled to cause the Generator to be moved to another location near the Building, at Landlord’s cost and expense. Tenant shall pay all personal property taxes on the Generator. Tenant shall also pay any increases in the real property taxes of the Building due to the installation of the Generator within thirty (30) days of receipt of notice from Landlord which includes proof of such increase in taxes. Tenant’s indemnity obligations under Section 5.4.1.5 of the Lease, relating to the use of Hazardous Materials, shall apply to the use and operation of the Generator. Finally, Tenant’s insurance obligations under Section 10.3 of the Lease shall apply to the Generator.

  • Loading RPMG shall schedule the loading and shipping of all outbound corn oil purchased hereunder, but all labor and equipment necessary to load trucks and rail cars and other associated costs shall be supplied and borne by Producer without charge to RPMG. Producer shall handle the corn oil in a good and workmanlike manner in accordance with RPMG’s written requirements and normal industry practice. Producer shall maintain the truck and rail loading facilities in safe operating condition in accordance with normal industry standards and shall visually inspect all trucks and rail cars to assure (i) cleanliness so as to avoid contamination, and (ii) that such trucks and railcars are in a condition suitable for transporting the corn oil. RPMG and RPMG’s agents shall have adequate access to the Ethanol Facility to load Producer’s corn oil on an industry standard basis that allows RPMG to economically market Producer’s corn oil. RPMG’s employees shall follow all reasonable safety rules and procedures promulgated by Producer and provided to RPMG reasonably in advance and in writing. Producer shall supply product description tags, certificates of analysis, bills of lading and/or material safety data sheets that are applicable to all shipments. In the event that Producer fails to provide the labor, equipment and facilities necessary to meet RPMG’s loading schedule, Producer shall be responsible for all costs and expenses, including without limitation actual demurrage and wait time, incurred by RPMG resulting from or arising in connection with Producer’s failure to do so.

  • Basement Any leaks or evidence of moisture? Yes No Unknown Does Not Apply Comments:

  • One-Way Interconnection Trunks 2.3.1 Where the Parties use One-Way Interconnection Trunks for the delivery of traffic from CBB to Verizon, CBB, at CBB’s own expense, shall:

  • Two-Way Interconnection Trunks 2.4.1 Where the Parties have agreed to use Two-Way Interconnection Trunks for the exchange of traffic between Verizon and ICG, ICG shall order from Verizon, and Verizon shall provide, the Two-Way Interconnection Trunks, and the Entrance Facility on which such Trunks will ride, and transport and multiplexing, in accordance with the rates, terms and conditions set forth in this Agreement and Verizon’s applicable Tariffs.

  • Delivery Point (a) All Energy shall be Delivered hereunder by Seller to Buyer at the Delivery Point. Seller shall be responsible for the costs of delivering its Energy to the Delivery Point consistent with all standards and requirements set forth by the FERC, ISO-NE, the Interconnecting Utility and any other applicable Governmental Entity and any applicable tariff.

  • Meters 7.1.1 For installation of Meters, Meter testing, Meter calibration and Meter reading and all matters incidental thereto, the SPD and SECI shall follow and be bound by the Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006, the Grid Code, as amended and revised from time to time.

  • Engine A. Any internal repairs or replacement of internal components, or replacement of engine assembly.

  • Metering The Interconnection Customer shall be responsible for the Connecting Transmission Owner’s reasonable and necessary cost for the purchase, installation, operation, maintenance, testing, repair, and replacement of metering and data acquisition equipment specified in Attachments 2 and 3 of this Agreement. The Interconnection Customer’s metering (and data acquisition, as required) equipment shall conform to applicable industry rules and Operating Requirements.

  • No Light, Air or View Easement Any diminution or shutting off of light, air or view by any structure which may be erected on lands adjacent to or in the vicinity of the Building shall in no way affect this Lease or impose any liability on Landlord.

Time is Money Join Law Insider Premium to draft better contracts faster.