Common use of Container Labeling Clause in Contracts

Container Labeling. All markings on the Containers shall be approved by the City in advance of ordering such Containers. On the lid of each Cart, and the body of each Bin and Drop Box, Contractor shall label the ultimate destination of such materials as follows: “LANDFILL” for Solid Waste; “RECYCLE” for Recyclable Materials (including Cardboard, mixed paper, metal, etc.); and, “COMPOST” for Organic Materials (including Food Waste, Yard Trimmings, wood waste, etc.). On the body of each Cart, Bin, and Drop Box, Contractor shall label the Container capacity (in gallons for Carts, and cubic yards for Bins and Drop Boxes). Container body labeling shall be positioned on the side of each Container so it is visible to the Customer at all times Carts shall have positional marking in the form of an arrow (at least three (3) inches by five (5) inches) hot stamped in white color on the Cart lid, indicating the direction of Cart placement; and, in character size of no less than 3/16 inches, the phrase: “PLACE CART WITH ARROW FACING STREET FOR COLLECTION.” All Carts shall include a high-quality educational information label using in-mold technology, such that all labeling shall be integral to the lid, though the use of injection molding, and shall not be affixed to any part of the Cart or lid using adhesives. Notwithstanding the provisions of this Section, or the requirements of SB 1383, the in-mold lid label shall, at a minimum, include for each Container: primary materials accepted; primary materials prohibited; a clear indication of Prohibited Container Contaminants for that Container type, acceptable materials; prohibited materials; notification forbidding Hazardous Waste and describing proper Disposal thereof; notification forbidding scavenging (through words and international symbols) and describing the penalties therefore under California law or City Resolution; information about the Collection program; and, the City’s name and logo. Subject to City approval, Contractor shall display City’s name, website, and Contractor’s designated telephone number using labels, decals, or other approved method. Upon expiration or early termination of this Agreement, Contractor shall transfer access and rights of such phone number and website to the City. Contractor shall be prohibited from including Contractor’s name and/or logo on any Containers utilized in the City.

Container Labeling. All markings on the Containers shall be approved by the City Authority Contract Manager in advance of ordering such Containers. On the lid of each Cart, and the body of each Bin Bin, and Drop Box, Contractor shall label the ultimate destination of such each materials as follows: “LANDFILL” for Solid Waste; “RECYCLE” for Recyclable Materials (including Cardboard, mixed paper, metal, etc.)Materials; and, “COMPOSTORGANICS” for Organic Materials (including Food Waste, Yard Trimmings, wood waste, etc.)Materials. On the body of each Cart, Bin, and Drop Box, Contractor shall label the Container capacity (in gallons for Carts, and cubic yards for Bins and Drop Boxes). Container body labeling shall be positioned on the side of each Container Container, so it is always visible to the Customer at all times Carts Customer. Each Cart shall have positional marking be stamped with the Authority’s name and an Authority owned web address and phone number, and no Container shall be stamped or labeled with Contractor’s name or logo. All Containers shall be labeled in accordance with the form requirements of an arrow (SB 1383. Recyclable Materials and Organic Materials Container labels shall include at least three (3) inches by five graphic examples of materials that are accepted in the Container, and at least two (52) inchesgraphic examples of materials that are prohibited from being placed in the Container, clearly displaying that the prohibited materials are prohibited (using recognizable symbols). Solid Waste Container labels must include at least two (2) hot stamped graphic examples of materials that are prohibited from being placed in white color on the Cart lidContainer, indicating clearly displaying that the direction prohibited materials are prohibited (using recognizable symbols), and a statement that proper separation of Cart placement; and, in character size of no less than 3/16 inches, the phrase: “PLACE CART WITH ARROW FACING STREET FOR COLLECTION.” Recyclable Materials and Organic Materials is mandatory. All Carts shall include a high-quality educational information label using in-mold technologytechnology with full color, such that all labeling shall be integral to the lid, though through the use of injection molding, and shall not be affixed to any part of the Cart or lid using with adhesives, unless otherwise approved in advance by the Authority Contract Manager. Notwithstanding the provisions of this Section, or the requirements of SB 1383, the in-mold lid label shall, at a minimum, include for each Containershall include: primary materials acceptedinformation about the Collection program; primary materials prohibited; a clear indication of Prohibited Container Contaminants for that Container type, acceptable materials; prohibited materials; notification forbidding Hazardous Waste and describing proper Disposal thereof; notification forbidding scavenging (through words and international symbols) and describing the penalties therefore under California law or City ResolutionMember Agency resolution; information about and the Collection program; and, the City’s Member Agencies’ name and logo. Subject to City approval, Contractor shall display City’s nameprovide Drop Boxes containing permanent, websitefully SB 1383 compliant labeling and color specifications to Customers subscribing to regular, and Contractor’s designated telephone number using labels, decals, or other approved method. Upon expiration or early termination of this Agreement, Contractor shall transfer access and rights of such phone number and website to the City. Contractor shall be prohibited from including Contractor’s name and/or logo on any Containers utilized in the Cityongoing Drop Box service.

Container Labeling. All markings on the Containers shall be approved by the City in advance of ordering such Containers. On the lid of each Cart, and the body of each Bin Bin, Drop Box and Drop BoxPublic Litter Module, Contractor shall label the ultimate destination of such materials as follows: “LANDFILL” for Solid Waste; “RECYCLE” for Recyclable Materials (including Cardboard, mixed paper, metal, etc.); and, “COMPOSTORGANICS” for Organic Materials (including Food WasteScraps, Yard Trimmings, wood waste, etc.). On the body of each Cart, Bin, and Drop Box, Contractor shall label the Container capacity (in gallons for Carts, and cubic yards for Bins and Drop Boxes). Container body labeling shall be positioned on the side of each Container Container, so it is always visible to the Customer at all times Carts Customer. Each Cart shall have positional marking be stamped with the City Logo, and no Container shall be stamped or labeled with Contractor’s name or logo, unless otherwise approved by City Contract Manager. Subject to City approval, Contractor shall display City's name using labels, decals, hot stamp, or other approved method. Contractor shall be prohibited from including Contractor’s name and/or logo on any Containers utilized in the form City unless otherwise approved by City Contract Manager. All Containers shall be labeled in accordance with the requirements of an arrow (SB 1383. Recyclable Materials and Organic Materials Container labels must include at least three (3) inches by five graphic examples of materials that are accepted in the Container, and at least two (52) inchesgraphic examples of materials that are prohibited from being placed in the Container, clearly displaying that the prohibited materials are prohibited (using recognizable symbols). Solid Waste Container labels must include at least two (2) hot stamped graphic examples of materials that are prohibited from being placed in white color on the Cart lidContainer, indicating clearly displaying that the direction prohibited materials are prohibited (using recognizable symbols), and a statement that proper separation of Cart placement; and, in character size of no less than 3/16 inches, the phrase: “PLACE CART WITH ARROW FACING STREET FOR COLLECTION.” Recyclable Materials and Organic Materials is mandatory. All Carts shall include a high-quality educational information label using in-mold technology, such that all labeling shall be integral to the lid, though through the use of injection molding, and shall not be affixed to any part of the Cart or lid using with adhesives, unless otherwise approved in advance by the City Contract Manager. Notwithstanding the provisions of this Section, or the requirements of SB 1383, the in-mold lid label shall, at a minimum, include for each Containershall include: primary materials acceptedinformation about the Collection program; primary materials prohibited; a clear indication of Prohibited Container Contaminants for that Container type, acceptable materials; prohibited materials; notification forbidding Hazardous Waste and describing proper Disposal thereof; notification forbidding scavenging (through words and international symbols) and describing the penalties therefore under California law or City Resolution; information about the Collection program; and, and the City’s name and logo. Subject to City approval, Contractor shall display City’s nameprovide Drop Boxes containing permanent, websitefully SB 1383 compliant labeling and color specifications to Customers subscribing to regular, and Contractor’s designated telephone number using labels, decals, or other approved method. Upon expiration or early termination of this Agreement, Contractor shall transfer access and rights of such phone number and website to the City. Contractor shall be prohibited from including Contractor’s name and/or logo on any Containers utilized in the Cityongoing Drop Box service.