Common use of Construction & Scope Clause in Contracts

Construction & Scope. OF WORK The construction scope of work shall include the following: • Erosion and sediment control; • Formation of foundations for Equipment, structures, pipe-racks and pipe tracks, and buildings, including piling and/or soils mixing where required; • Installation of underground piping and drainage systems; • Finished area grading and paving; • Installation of structural components of the Project; • Installation of the vessels, tanks, buildings, and other Equipment; • Installation of the rotating equipment, motors, turbines, compressors, pumps and blowers; • Installation of piping components and systems; • Installation of electrical substations and installation of power distribution Equipment; • Installation of the fire water system extension for Train 5; • Installation of the power and control cabling systems; Page 42 of 62 This document, and the information it contains, are the property of or contains intellectual property that has been licensed to, Rio Grande LNG Train 5, LLC and/or its affiliates (“Company”). This document and its contents are “Confidential Information” as such term is used in relevant agreements between Company and the recipient. It may not be disclosed internally or to third parties without the prior, express approval of Company and in certain cases, its licensors. Company reserves all rights in relation to the misappropriation or misuse of this document and the Confidential Information that it contains. Please refer to your legal department regarding the terms and conditions of use. RGLNG T5 – ▇▇▇▇▇▇▇ – Train 5 EPC Agreement EPC SCOPE OF WORK OF THE TRAIN 5 FACILITY RG2-NTD-500-PE-SOW-0001 • Installation of the instrument and control devices and systems; • Installation of telecommunication & security equipment and systems; • Installation of the instrument, control devices and systems and telecommunication & security systems cabling systems; • Installation of Electrical, ICSS, Instrument, Telecom & Security Fiber Optic cabling systems; • Application of paint, insulation, heat tracing, cathodic protection and fireproofing systems; • Installation of permanent plant roads and security fences; • Painting two NextDecade logos on the LNG Storage Tank; • Installation, maintenance and removal of temporary facilities; • Provision of temporary facilities for the supply of electricity, water, and telephone / communication systems for construction of the works; • Provision of temporary facilities for the disposal of sewage from the construction worksite up to that time that connection to the new sanitary effluent return line to local sewage treatment plant is available; and • Contractor shall ensure temporary strainers or other methods of protecting Equipment are included for all Equipment that is susceptible to damage from construction debris. Contractor shall follow suppliers’ recommendations as to which Equipment this applies as a minimum requirement. • Installation of any piping, structural, civil, mechanical, electrical, instrumentation, control, or telecommunications tie-ins between Train 5 and Trains 1, 2, 3 and 4 or the Common Systems. Upon completion of the construction scope of work, Contractor shall remove from Site all above ground temporary facilities, except for those agreed with Owner to be retained for future stages of Facility development for which Contractor shall be suitably compensated. For underground temporary utilities see section 15.15.3 of this SOW. 15.3 RULES AND REGULATIONS Contractor shall produce written rules of conduct for review and agreement by Owner within [***] ([***]) Days following the start of NTP, which shall apply to all of Contractor’s, and its Subcontractor’s, personnel at the Site. Contractor shall enforce all Applicable Laws, and Applicable Codes and Standards. Such rules of conduct shall cover all employees of Contractor, its Subcontractors, and any visitors. Contractor shall provide a system to identify all personnel working at the Site. This system shall include its own employees and those of its Subcontractors and the Owner. Each employee authorized to be on Site shall wear an identification tag, which shall include a unique pass number of the individual. Visitors and Subcontractors authorized to be on Site shall also display an appropriate pass. Contractor shall prominently display statutory notices and Site working and safety regulations, including OSHA required notices. Contractor shall bring to its employees’ attention, and to the attention of the employees of its Subcontractors, notices and instructions as posted, or issued. 15.4 COMMUNITY ENGAGEMENT Contractor shall develop a local content plan for review by Owner and stakeholder engagement plan for review and agreement by Owner. [***]. Page 43 of 62 This document, and the information it contains, are the property of or contains intellectual property that has been licensed to, Rio Grande LNG Train 5, LLC and/or its affiliates (“Company”). This document and its contents are “Confidential Information” as such term is used in relevant agreements between Company and the recipient. It may not be disclosed internally or to third parties without the prior, express approval of Company and in certain cases, its licensors. Company reserves all rights in relation to the misappropriation or misuse of this document and the Confidential Information that it contains. Please refer to your legal department regarding the terms and conditions of use. RGLNG T5 – ▇▇▇▇▇▇▇ – Train 5 EPC Agreement EPC SCOPE OF WORK OF THE TRAIN 5 FACILITY RG2-NTD-500-PE-SOW-0001 15.5 CONSTRUCTION LABOR Contractor shall fulfill direct and indirect labor needs. Contractor shall use a qualified work force to construct the Project. Contractor shall provide a construction management team (CMT) to manage, supervise and execute the Work.

Construction & Scope. OF WORK The construction scope of work shall include the following: • Erosion and sediment control; • Formation of foundations for Equipment, structures, pipe-racks and pipe tracks, and buildings, including piling and/or soils mixing where required; • Installation of underground piping and drainage systems; • Finished area grading and paving; • Installation of structural components of the Project; • Installation of the vessels, tanks, buildings, and other Equipment; • Installation of the rotating equipment, motors, turbines, compressors, pumps and blowers; • Installation of piping components and systems; • Installation of electrical substations and installation of power distribution Equipment; • Installation of the fire water system extension for Train 54; • Installation of the power and control cabling systems; Page 42 of 62 This document, and the information it contains, are the property of or contains intellectual property that has been licensed to, Rio Grande LNG Train 5, LLC and/or its affiliates (“Company”). This document and its contents are “Confidential Information” as such term is used in relevant agreements between Company and the recipient. It may not be disclosed internally or to third parties without the prior, express approval of Company and in certain cases, its licensors. Company reserves all rights in relation to the misappropriation or misuse of this document and the Confidential Information that it contains. Please refer to your legal department regarding the terms and conditions of use. RGLNG T5 – ▇▇▇▇▇▇▇ – Train 5 EPC Agreement EPC SCOPE OF WORK OF THE TRAIN 5 FACILITY RG2-NTD-500-PE-SOW-0001 • Installation of the instrument and control devices and systems; • Installation of telecommunication & security equipment and systems; • Installation of the instrument, control devices and systems and telecommunication & security systems cabling systems; • Installation of Electrical, ICSS, Instrument, Telecom & Security Fiber Optic cabling systems; • Application of paint, insulation, heat tracing, cathodic protection and fireproofing systems; • Installation of permanent plant roads and security fences; • Painting two NextDecade logos on the LNG Storage Tank; • Installation, maintenance and removal of temporary facilities; Page 42 of 63 This document, and the information it contains, are the property of or contains intellectual property that has been licensed to, Rio Grande LNG Train 4, LLC and/or its affiliates (“Company”). This document and its contents are “Confidential Information” as such term is used in relevant agreements between Company and the recipient. It may not be disclosed internally or to third parties without the prior, express approval of Company and in certain cases, its licensors. Company reserves all rights in relation to the misappropriation or misuse of this document and the Confidential Information that it contains. Please refer to your legal department regarding the terms and conditions of use. RGLNG T4 – ▇▇▇▇▇▇▇ – Train 4 Amended and Restated EPC Agreement AMENDED AND RESTATED EPC SCOPE OF WORK OF THE TRAIN 4 FACILITY RG2-NTD-000-PE-SOW-0001 • Provision of temporary facilities for the supply of electricity, water, and telephone / communication systems for construction of the works; • Provision of temporary facilities for the disposal of sewage from the construction worksite up to that time that connection to the new sanitary effluent return line to local sewage treatment plant is available; and • Contractor shall ensure temporary strainers or other methods of protecting Equipment are included for all Equipment that is susceptible to damage from construction debris. Contractor shall follow suppliers’ recommendations as to which Equipment this applies as a minimum requirement. • Installation of any piping, structural, civil, mechanical, electrical, instrumentation, control, or telecommunications tie-ins between Train 5 4 and Trains 1, 2, 2 and 3 and 4 or the Common Systems. Upon completion of the construction scope of work, Contractor shall remove from Site all above ground temporary facilities, except for those agreed with Owner to be retained for future stages of Facility development for which Contractor shall be suitably compensated. For underground temporary utilities see section 15.15.3 of this SOW. 15.3 RULES AND REGULATIONS Contractor shall produce written rules of conduct for review and agreement by Owner within [***] ([***]) Days following the start of NTP, which shall apply to all of Contractor’s, and its Subcontractor’s, personnel at the Site. Contractor shall enforce all Applicable Laws, and Applicable Codes and Standards. Such rules of conduct shall cover all employees of Contractor, its Subcontractors, and any visitors. Contractor shall provide a system to identify all personnel working at the Site. This system shall include its own employees and those of its Subcontractors and the Owner. Each employee authorized to be on Site shall wear an identification tag, which shall include a unique pass number of the individual. Visitors and Subcontractors authorized to be on Site shall also display an appropriate pass. Contractor shall prominently display statutory notices and Site working and safety regulations, including OSHA required notices. Contractor shall bring to its employees’ attention, and to the attention of the employees of its Subcontractors, notices and instructions as posted, or issued. 15.4 COMMUNITY ENGAGEMENT Contractor shall develop a local content plan for review by Owner and stakeholder engagement plan for review and agreement by Owner. [***]. Page 43 of 62 This document, and the information it contains, are the property of or contains intellectual property that has been licensed to, Rio Grande LNG Train 5, LLC and/or its affiliates (“Company”). This document and its contents are “Confidential Information” as such term is used in relevant agreements between Company and the recipient. It may not be disclosed internally or to third parties without the prior, express approval of Company and in certain cases, its licensors. Company reserves all rights in relation to the misappropriation or misuse of this document and the Confidential Information that it contains. Please refer to your legal department regarding the terms and conditions of use. RGLNG T5 – ▇▇▇▇▇▇▇ – Train 5 EPC Agreement EPC SCOPE OF WORK OF THE TRAIN 5 FACILITY RG2-NTD-500-PE-SOW-0001 15.5 CONSTRUCTION LABOR Contractor shall fulfill direct and indirect labor needs. Contractor shall use a qualified work force to construct the Project. Contractor shall provide a construction management team (CMT) to manage, supervise and execute the Work.