Common use of CABLE SPLICERS Clause in Contracts

CABLE SPLICERS. Cable splicing work shall consist, of the following - “splicing pot head and termination of all circuits having a rating of 2300V and above which are lead covered and/or shielded.” Each cable splicer shall be assisted by a journeyman ▇▇▇▇▇▇▇ when assistance is needed. Section 3.14. High time on water tanks, steeples, TV or radio towers, smoke stacks and silos, where the electrical work performed extends twenty-five (25) feet above the base of these specified structures, the men who climb these structures while performing work above the twenty- five (25) foot level shall receive a premium of three dollars ($3) per hour in addition to the regular scheduled rate of pay. Any work performed above three hundred (300) feet of the above described structures, the men who perform this work shall receive a premium of four dollars ($4) per hour in addition to the regular scheduled rate of pay. Section 3.15. Men performing work on the above structures above twenty-five (25) feet from a spider or bosum chair shall receive a premium of six dollars ($6) per hour in addition to the regular schedule rate of pay. Section 3.16. An additional one dollar ($1) an hour will be paid for working on bar joists, walk logs, exposed steel and swinging scaffolds when the surface the ▇▇▇▇▇▇▇ stands or sits on exceeds twenty-five (25) feet above solid floor and the ▇▇▇▇▇▇▇ is subject to free fall. On similar work above fifty (50) feet, a premium of three dollars ($3) per hour will be paid in addition to the regular scheduled rate of pay. Section 3.17. When so elected by the contractor, multiple shifts of at least five (5) days’ duration may be worked. When two (2) or three (3) shifts are worked: A. M. Workmen on the “swing shift” shall receive eight (8) hours’ pay at the regular hourly rate plus 10% for seven and one-half (7 ½) hours’ work. The third shift (graveyard shift) shall be worked between the hours of 12:30 A.M. and 8:00 A.M. Workmen on the “graveyard shift” shall receive eight (8) hours’ pay at the regular hourly rate plus 15% for seven (7) hours’ work. A lunch period of thirty (30) minutes shall be allowed on each shift. All overtime work required after the completion of a regular shift shall be paid at one and one-half times the “shift” hourly rate. There shall be no pyramiding of overtime rates and double the straight rate shall be the maximum compensation for any hour worked. There shall be no requirement for a day shift when either the second or third shift is worked. Section 3.18. The Employer shall pay for traveling time plus $6.00 for transportation from shop to job, job to job, and job to shop, within the jurisdiction of the Union, not applicable on initial job assignment. On work outside the jurisdiction of the Union, the Employer shall furnish transportation, board and all other necessary expenses. Section 3.19. When a man is directed to report to a job and does not start work due to weather conditions, lack of material or other causes beyond his control he shall receive two (2) hours pay unless notified before 7:00 A.M., provided that he has furnished the Employer with a telephone number where he may be reached for notification. If employee begins to work, he shall be paid not less than three (3) hours. Section 3.20. Any man reporting for work and being laid-off, not having been notified the day previous of such layoff shall receive not less than three (3) hours wages in order to gather his tools and personal belongings and shall be paid in full immediately. The three hour assessment shall not apply if the employee was absent from the job the previous day. In the event the employee is not paid off, refer to Section 3.03. Section 3.21. When an employee is required to change his normal shift. There should be at least an eight (8) hour lapse. Section 3.22. The fabrication and assembly of all materials or equipment other than standard manufactured items, shall be done whenever practical, by workmen employed under the terms of this Agreement.

CABLE SPLICERS. Cable splicing work shall consist, of the following - “splicing pot head and termination of all circuits having a rating of 2300V and above which are lead covered and/or shielded.” Each cable splicer shall be assisted by a journeyman ▇▇▇▇▇▇▇ when assistance is needed. Section 3.14. High time on water tanks, steeples, TV or radio towers, smoke stacks and silos, where the electrical work performed extends twenty-five (25) feet above the base of these specified structures, the men who climb these structures while performing work above the twenty- five (25) foot level shall receive a premium of three dollars ($3) per hour in addition to the regular scheduled rate of pay. Any work performed above three hundred (300) feet of the above described structures, the men who perform this work shall receive a premium of four dollars ($4) per hour in addition to the regular scheduled rate of pay. Section 3.15. Men performing work on the above structures above twenty-five (25) feet from a spider or bosum chair shall receive a premium of six dollars ($6) per hour in addition to the regular schedule rate of pay. Section 3.16. An additional one dollar ($1) an hour will be paid for working on bar joists, walk logs, exposed steel and swinging scaffolds when the surface the ▇▇▇▇▇▇▇ stands or sits on exceeds twenty-five (25) feet above solid floor and the ▇▇▇▇▇▇▇ is subject to free fall. On similar work above fifty (50) feet, a premium of three dollars ($3) per hour will be paid in addition to the regular scheduled rate of pay. Section 3.17. When so elected by the contractor, multiple shifts of at least five (5) days’ duration may be worked. When two (2) or three (3) shifts are worked: A. M. Workmen on the “swing shift” shall receive eight (8) hours’ pay at the regular hourly rate plus 10% for seven and one-half (7 ½) hours’ work. The third shift (graveyard shift) shall be worked between the hours of 12:30 A.M. and 8:00 A.M. 8:00 A. M. Workmen on the “graveyard shift” shall receive eight (8) hours’ pay at the regular hourly rate plus 15% for seven (7) hours’ work. A lunch period of thirty (30) minutes shall be allowed on each shift. All overtime work required after the completion of a regular shift shall be paid at one and one-half times the “shift” hourly rate. There shall be no pyramiding of overtime rates and double the straight rate shall be the maximum compensation for any hour worked. There shall be no requirement for a day shift when either the second or third shift is worked. Section 3.18. The Employer shall pay for traveling time plus $6.00 for transportation from shop to job, job to job, and job to shop, within the jurisdiction of the Union, not applicable on initial job assignment. On work outside the jurisdiction of the Union, the Employer shall furnish transportation, board and all other necessary expenses. Section 3.19. When a man is directed to report to a job and does not start work due to weather conditions, lack of material or other causes beyond his control he shall receive two (2) hours pay unless notified before 7:00 A.M., provided that he has furnished the Employer with a telephone number where he may be reached for notification. If employee begins to work, he shall be paid not less than three (3) hours.) Section 3.20. Any man reporting for work and being laid-off, not having been notified the day previous of such layoff shall receive not less than three (3) hours wages in order to gather his tools and personal belongings and shall be paid in full immediately. The three hour assessment shall not apply if the employee was absent from the job the previous day. In the event the employee is not paid off, refer to Section 3.03. Section 3.21. When an employee is required to change his normal shift. There should be at least an eight (8) hour lapse. Section 3.22. The fabrication and assembly of all materials or equipment other than standard manufactured items, shall be done whenever practical, by workmen employed under the terms of this Agreement.